Protel 快捷键(Protel 快捷键)
Protel 快捷键(Protel 快捷键)
1. Design browser shortcuts:
The mouse left click on the mouse position document selection
Double click the mouse to edit the location of the document
Right click to display the associated pop-up menu
Ctrl+F4 closes the current document
Ctrl+Tab loop switches the document open
Alt+F4 closes the design browser DXP
2, schematic and PCB universal shortcut key:
Shift when automatic translation, fast translation
When the Y is placed, flip up and down
When the X is placed, turn left and right
Shift+ vs. up / down arrow direction with ten mesh increments, move the cursor
Up / down vs. the direction of the arrow to a grid for incremental, moving the cursor
SpaceBar abandon screen refresh
Esc exits the current command
End screen refresh
Home refreshes the screen with the cursor centered
PageDown, Ctrl+ mouse wheel, with the cursor as the center to reduce the screen
PageUp, Ctrl+ mouse wheel, with cursor as center, prevent big picture
Move the picture up and down with mouse wheel
Shift+ move the mouse around the wheel screen
Ctrl+Z undo the last operation
Ctrl+Y repeats the last operation
Ctrl+A select all
Ctrl+S saves the current document
Ctrl+C replication
Ctrl+X shear
Ctrl+V paste
Ctrl+R copy and paste the selected object repeatedly
Delete delete
V+D displays the entire document
V+F displays all objects
X+A cancels all selected objects
Click and hold the right mouse button to show the slider and move the screen
Click the left mouse button to select the object
Click the right mouse button to display the pop-up menu or cancel the current command
Right click the mouse and select Find Similar to select the same object
Click the left mouse button and press and drag to select the internal object in the selection area
Click and hold the left mouse button, select the object of the cursor and move
Double click the left mouse button to edit the object
Shift+ click the left mouse button to select or deselect
TAB editors are placing properties of objects
Shift+C clears the currently filtered object
Shift+F can choose the same object
Y popup quick query menu
F11 open or close the Inspector panel
F12 open or close the List panel
3, schematic, shortcut key:
Alt limits object movement on both horizontal and vertical lines
G loop toggle capture grid settings
The space bar (Spacebar) rotates 90 degrees when placing objects
When the space bar (Spacebar) places wires, buses, and polygon lines, the start / end mode is activated
Shift+ the space bar (Spacebar) switches the placement mode when placing wires, buses, and polygonal lines
Backspace (Backspace) removes the last corner when placing wires, buses, and polygonal lines
Click and hold the left mouse button +Delete to delete the
corner of the selected center line
Click and hold the left mouse button. +Insert adds the corner at the selected line
Ctrl+ click and drag the left mouse button to drag the selected object
4, PCB shortcuts:
Shift+R switch three routing modes
Shift+E turns on or off the electrical grid
Ctrl+G pop-up capture grid dialog box
G pop-up capture grid menu
Hide mesh lines while moving N components
L mirror element to another layout layer
The backspace button removes the last corner of the fabric copper wire
Shift+ the spacebar switches corner mode on the cloth copper wire
The space bar changes the start / finish mode of the copper wire
Shift+S switch on / off single layer display mode
O+D+D+Enter select draft display mode
O+D+F+Enter selects the normal display mode
O+D displays / hides the Prefences dialog box
L displays the Board Layers dialog box
Ctrl+H selects connecting copper wires
Ctrl+Shift+Left-Click interrupt line
Switch to next layer (numeric keyboard)
Switch to the previous layer (numeric keypad)
* next routing layer (numeric keypad)
M+V moves to cut the vertices of the plane layer
Alt avoids switching between obstacles and ignoring obstacles
Ctrl wiring temporarily does not display electrical grid
Ctrl+M measuring distance
Shift+ the spacebar moves the object clockwise
The object that the space bar rotates counter clockwise
Q switching between metric and British units
Enter - select or start
ESC - give up or cancel
F1 - start the online help window
Tab - property window for starting floating maps
PgUp - zoom in window display scale
PgDn - reduce window display ratio
End - refresh the screen
Del -- the component that removes the points (1)
Ctrl+del - removes selected components (2 or more than 2)
X+a - cancels the selection of all selected maps
X - flip the floating map around
Y - Flip up and down floating maps
Space - rotate the floating map 90 degrees
Crtl+ins - copy the selected map into the editing area
Shift+ins - paste the map from the clipboard into the editing
area
Shift+del - cut the selected map into the clipboard
Alt+backspace - restore the previous operation
Ctrl+backspace - cancel the previous recovery
Crtl+g - jump to the specified location
Crtl+f - looks for the specified text
Alt+f4 - close Protel
Spacebar - change the routing mode when drawing a wire, line, or bus
V+d - zoom view to show the whole circuit diagram
V+f - zoom view to show all circuit components
Home - refresh the screen with the cursor position centered
ESC - terminates the current operation and returns the standby state
Backspace - when removing wires or polygons, delete the last vertex
Delete - when removing wires or polygons, delete the last vertex
Ctrl+tab - toggles between open design documents and documents
Alt+tab - switches between open applications
A - pops up the edit\align submenu
B - pops up the view\toolbars submenu
E - pops up the edit menu
F - pops up the file menu
H - pops up the help menu
J - pops up the edit\jump menu
L - pops up the edit\set location makers submenu
M - pops up the edit\move submenu
O - pops up the options menu
P - pops up the place menu
R - pops up the reports menu
S - pops up the edit\select submenu
T - pops up the tools menu
V - pops up the View menu
W - pops up the window menu
X - pops up the edit\deselect menu
Z - pops up the zoom menu
Left arrow left 1 electrical grids left
Shift+ left arrow left the cursor on the 10 electrical grid
Right arrow cursor moves right to the 1 electrical grid
Shift+ right arrow cursor moves right to the 10 electrical grid
Up arrow - move the 1 electrical grids on the cursor
Arrow on the shift+ - move up 10 electrical grids on the cursor
Down arrow - move the cursor down the 1 electrical grid
Shift+ arrow down the cursor, move down the 10 electrical grids
Ctrl+1 - display drawings in the size of the original part
Ctrl+2 - display drawings with 200% of the original size of the part
Ctrl+4 - display drawings with 400% of the original size of the part
Ctrl+5 - display drawings with 50% of the original size of the part
Ctrl+f -- find the specified characters
Ctrl+g - find alternate characters
Ctrl+b - select the following edge of the selected object as the baseline and align the bottom
Ctrl+t - selects the top edge of the selected object as the baseline, top aligned
Ctrl+l - the selected object to the left edge of base alignment
Ctrl+r - the selected object to the right edge as a benchmark, right aligned
Ctrl+h - the selected object is centered around the center line of the left and right edges, centered horizontally
Ctrl+v - take the center line of the lower edge of the selected object as the baseline and align vertically
Ctrl+shift+h - sets the selected object horizontally between the left and right edges
Ctrl+shift+v - vertically distribute the selected object between the upper and lower edges
F3 -- find the next matching character
Shift+f4 - displays all of the document windows open
Shift+f5 - displays all of the document windows open
Shift+ single left mouse - select a single object
Crtl+ single left mouse, release crtl again drag individual object
Shift+ctrl+ left mouse -- moving a single object
Press Ctrl to move or drag to move the object without restriction from the appliance grid
Press ALT to move or drag to move vertically until you move the object
Press shift+alt to move or drag to move horizontally when moving objects