西铁城光动能手表原装说明书C65x

Setting Instructions for Movement Caliber C650/C651/C652 Contents 1. FEATURES 2. BEFORE USING 3. SECIFICATIONS 4. NAME OF COMPONENTS AND MAJOR FUNCTIONS 5. SWITCHING THE MODE (DISPLAY FUNCTIONS) 6. CHECKING O-POSITION OF EACH HAND 7. ACCESSING TIMES OF DATES OF MAJOR CITIES 8. SWITCHING ANALOG TIME AND DIGITAL TIME 9. SETTING THE TIME (TIME IS CORRECTED BY DIGITAL DISPLAY) 10. SETTING THE DATE (DATE IS CORRECTED BY DIGITAL DISPLAY) 11. USING THE ALARM MODE 12. USING THE CHRONOGRAPH 13. USING THE TIMER 14. USING ZONE SETTING 15. ALL RESET 16. FUNCTIONS UNIQUE TO SOLAR-POWERED WATCHES 17. POWER CONSERVATION FEATURE 18. GENERAL REFERENCE FOR CHARGING TIMES 20. USING THE BEZEL REGISTER RING 19. NOTES REGARDING HANDLING OF THIS WATCH 21. CARE OF YOUR WATCH (click on a topic) This watch is a combination solar-powered watch that contains a solar cell in its face that drives the watch hands, alarm, chronograph, timer and numerous other functions by converting light energy into electrical energy. It is also equipped with convenient functions including three power save modes that reduce power consumption when light is not shining on the solar cell, and a "charge indicator" that roughly indicates how much the secondary battery is charged. 2. BEFORE USING This watch is a solar-powered watch. Before using, allow light to shine onto the watch so that it is sufficiently charged. If the manual power save function has been activated, cancel it before charging. (Refer to p.19 for information on the procedure for canceling the manual Power-Save function.) A rechargeable battery is used in this watch to store electrical energy. This rechargeable battery is a clean energy battery that does not contain mercury or other toxic substances. Once fully charged, the watch will continue to run for a maximum of 4 years without additional charging (when in the power save 2 mode). Please note this is not a user replaceable item. [Proper Use of this Watch] To use this watch comfortably, make sure to recharge it before it stops running completely. There is no risk of overcharging the watch no matter how often it is recharged (Overcharging Prevention Function). It is recommended that the watch be recharged everyday for optimum performance. Return to Table of Contents Return to Table of Contents 1. FEATURES 3. Specifications Movement Caliber Number C650 Accuracy Within +/- 15 seconds per month (when worn at normal temperatures of 5oC to 35 oC/(41oF to 95 oF) Operating temperature range Watch operating temperature range : 0oC +55oC (32oF to 131oF) Analog Display Time: Second, minutes, hours, 24 hours, UTC minutes, UTC hours, mode Time Seconds, minutes, hours, city name, daylight savings time, A/P Calendar Month, date, day, city name Alarm 1 Hours, Minutes, A/P, city name, ON/OFF Alarm 2 Hours, Minutes, A/P, city name, ON/OFF Alarm 3 Hours, Minutes, A/P, city name, ON/OFF Chronograph Chronograph hours, chronograph minutes, chronograph seconds, chronograph 1/100 seconds, SPL, 24 hour measurement Timer Timer remaining minutes, timer remaining seconds, set minutes (timer setting range: 99 minutes to 1 minutes in 1 minute units Display Function D ig ita l D isp la y Zone Setting City name (SET/OFF), daylight savings time (ON/OFF), display setting and cancellation for each city, setting of ON/OFF for daylight savings time for each city. Additional Functions x� Switching between main time (analog) and sub-time (digital) x� Power save 1: Automatically stops second hand movement and liquid crystal display x� Power Save 2: Automatically stops watch functions x� Manual Power Save: Enables watch functions to be stopped arbitrarily (forcibly) x� Power indicator: Approximate indication of Eco Drive Rechargeable battery charging level x� Insufficient charging warning function x� Time setting warning function x� Overcharging prevention function Continuous running times Fully charged to stopped: Roughly 4 years (when Power Save 2 function is operating) Two –second interval movement to stopped: Roughly 1.5 days Battery Eco Drive rechargeable Manganese Titanium battery. Not user replaceable Return to Table of Contents Return to Table of Contents 4. NAMES OF COMPONENTS AND MAJOR FUNCTIONS Name /Mode Time Calendar Alarm 1 Alarm 2 Alarm 3 Chronograph Timer Zone Setting (1) Mode Hand TME CAL AL-1 AL-2 AL-3 CHR TMR SET (2) Hour Hand Always Indicates Hours (3) Minute Hand Always Indicates Minutes (4) Second Hand Always Indicates Seconds (5) 24 Hour Hand Always indicates “24-Hour time” in conjunction with hour and minutes (6) UTC hour hand Always indicates “UTC Hours” (7) UTC minute hand Always indicates “UTC Minutes” (8) Digital Display 1 Hours, minutes, seconds, A/P, SMT(when set to daylight savings time Month, date, day, SMT( when set to daylight savings time Hours, minutes, A/P, alarm (ON/OFF) Measured time (seconds, minutes, 1/100 seconds) Remaining time display (minutes seconds) City name (SET/OFF) SMT (ON/OFF) City Name Measured time (hours) Set time (minutes) City Name(9) Digital Display 2 Charge indicator (10) Crown Normal Position Mode Switching 1st Click Changing the city 2nd Click Time Correction Date Correction Alarm Correction 0-position adjustment Set time correction City name, time difference setting (A) Button A Normal Position Changing the city Start Stop Changing the city 1st Click Switching City Name (set/off) 2nd Click Switching Location to be corrected Switching Location to be corrected (B) Button B Normal Position Changing the city Split, reset Reset Changing the city 1st Click Switching alarm (on/off) Switching SMT (on/off) 2nd Click Switching SMT (on/off) Switching between “seconds” correction and “24 hour time” correction Switching alarm (on/off) Return to Table of Contents Return to Table of Contents 5. SWITCHING THE MODE (DISPLAY FUNCTIONS) In addition to the time and date modes, this watch is also equipped with three additional modes consisting of the alarm, chronograph and timer modes. The mode can be switched by turning the crown. Check the current mode with the mode hand. 6. CHECKING O-POSITION OF EACH HAND Before using this watch, check that the 0-position (based position of each hand) is set correctly to ensure that the functions of the watch operate properly by performing the following procedure. 1. Turn the crown while in the normal position to set the mode hand to the chronograph [CHR) mode. 2. Pull the crown out to the second click (O- position correction position). The second hand, minute hand, hour hand, 24-hour hand, UTC hour hand and UTC minute hand rapidly advance to the 0-position (12:00 position). Note: When each hand is not at the 0-position, perform the "O-position correction" procedure. If this 0-position is out of alignment, each hand will not indicate the correct position. Return to Table of Contents Return to Table of Contents O-Position Correction (Setting to the Watch Base Position) When setting the 0-position of each hand, always make sure to turn the crown forward (clock- wise) to set each hand to its 0-position in the clockwise direction. 1. Turn the crown while in the normal position to set the mode hand to the chronograph [CHR] mode. 2. Pull the crown out to the second click (0-position correction position). x� The second hand, minute hand, hour hand, 24-hour hand, UTC hour hand and UTC minute hand rapidly advance to the position stored in memory. x� "HR" lights during digital display 2 indicating that the watch is in the correction state. 3. Turning the crown forward (clockwise) allows correction to be made in the positive direction. Turning the crown continuously allows the 0-position to be corrected continuously. 4. Pressing button (A) switches the correction location between "MIN" (minute hand) and "SEC" (second hand) each time it is pressed. 5. Turn the crown forward (clockwise) to align each hand at the 0-position at each correction location. Although correction can be made in the negative direction by turning the crown backward (counter-clockwise), always make sure to set the 0-position by turning the crown for- ward to ensure that the 0-position is set correctly. x� The 24-hour hand is corrected in conjunction with the hour hand. x� The UTC hour and minute hands are corrected in conjunction with the minute hand. • The second hand can only be corrected in the forward (clockwise) direction only. 6. After correcting, return the crown to the normal position. After correcting the 0-position of each hand, reset the time, calendar and other modes before using the watch. Note: None of the buttons on the watch operate during movement of each hand. Operate the buttons only after the hands have stopped moving. Return to Table of Contents Return to Table of Contents 7. ACCESSING TIMES OR DATES OF MAJOR CITIES The time of date of major cities pre-registered in this watch can be easily accessed by pressing the buttons. 1. Turn the crown to set the mode hand to the time [TME] or calendar [CAL] mode. 2. When button (A) is pressed, the times or dates of major cities are displayed while scrolling up each time it is pressed. 3. When button (B) is pressed, the times or dates of major cities are displayed while scrolling down each time it pressed. * Pressing button (A) or (B) continuously causes the display to advance rapidly. x� Cities (regions) in which daylight savings time is used are indicated with a 0, while those in which it is not are indicated with an X. x� The time difference and use of daylight savings time of each city are subject to change by the particular country. Return to Table of Contents Return to Table of Contents 8. SWITCHING ANALOG TIME AND DIGITAL TIME This watch is able to switch between analog time display and digital time display. 1. Turn the crown to set the mode hand to the time [TME) mode. 2. Press button (A) and (B) simultaneously. 3. After a confirmation tone sounds, the watch switches the time of the city displayed by analog display and the time of the city displayed by digital display. If buttons (A) and (B) are simultaneously pressed when in the calendar [CAL] Mode, the watch switches the date of the city displayed by analog display and the date of the city displayed by digital display (the times are switched at this time as well). 9. SETTING THE TIME (TIME IS CORRECTED BY DIGITAL DISPLAY) When digital time is corrected, the second, minute, hour, 24 hour and UTC hour and minute hands of the analog time are corrected automatically in conjunction with digital time. 1. Turn the crown and set the mode hand to the time [TME] mode. 2. Press either button (A) or button (B) to access the city to be corrected. 3. When the crown is pulled out to the second click (time setting position), the watch enters the time correction state. 4. When button (A) is pressed, the location to be corrected changes each time it is pressed. Select the location to be corrected. (The location that is flashing is the location that can be corrected.) • When button (B) is pressed in the [SMT] daylight savings time correction state daylight savings time can be set (ON) or canceled (OF). • "Seconds" return to zero when button (B) is pressed in the "seconds" correction state. • When the crown is turned forward (clockwise) in the "hour" or "minute" correction states, correction is made in the positive direction. Turning the crown continuously allows "hours" or 11 minutes" to be corrected continuously. Although correction can be made in the negative direction when the crown is turned backward (counter-clockwise), always make sure to turn the crown forward to ensure that the time is set correctly. • Switching "12H/24H time" is performed by pressing button (B). 5. After corrections have been completed, return the crown to the normal position Return to Table of Contents Return to Table of Contents 10. SETTING THE DATE (DATE IS CORRECTED BY DIGITAL DISPLAY) 1. Turn the crown and set the mode hand to the calendar [CAL] mode. 2. Press either button (A) or button (B) to access the city to be corrected. 3. When the crown is pulled out to the second click (date setting position), the watch enters the date correction state. 4. When button (A) is pressed, the location to be corrected changes each time it is pressed. Select the location to be corrected so that it is flashing. When the crown is turned forward (clockwise), correction is made in the positive direction. When the crown is turned backward (counter-clockwise), correction is made in the negative direction. Turning the crown continuously allows corrections to be made rapidly. 5. After corrections have been completed, return the crown to the normal position. Notes: 1. When the date is set for any one city, the dates of other cities, including UTC time, are corrected automatically. 2. The year can be set from 2000 to 2099. 3. The day is corrected automatically when the year, month and date are set. 4. Since this watch is equipped with an auto-calendar function, it is not necessary to correct the date at the end of the month. 5. When the date has been set to a non-existent date, the watch automatically displays the lst day of the following month when the watch is returned to the normal display. Return to Table of Contents Return to Table of Contents 11. USING THE ALARM MODE The alarm setting procedure and other procedures for alarm use are the same for Alarm 1, 2 and 3. Only the tone that sounds is different. The alarm sounds for 15 seconds when the set time is reached once a day. When the alarm is sounding, it can be turned off by pressing button (A) or (B). 1.Turn the crown and set the mode hand to either the Alarm 1, 2 or 3 [AL-1, 2 or 3] mode. 2. Press either button (A) or button (B) to access the city to be corrected. 3. When the crown is pulled out to the second click (alarm time setting position), the watch enters the alarm correction state. 4. When button (A) is pressed, the location to be corrected changes each time it is pressed. Select the location to be corrected so that it flashes. x� The alarm can be set (ON) or canceled (OF) by pressing button (B) when the watch is in the alarm ON/OF correction state. x� When the crown is turned forward (clockwise) in the "hours" or "minutes" correction state, correction is made in the positive direction. When the crown is turned backward (counter-clockwise), correction is made in the negative direction. x� Turning the crown continuously allows corrections to be made rapidly. 5. After corrections have been completed, return the crown to the normal position. Note: 1. When the time mode is set to the 12-hour time display, the alarm time also uses a 12-hour time display. Pay attention to AM and PM when setting the alarm time. Return to Table of Contents Return to Table of Contents The alarm can be switched ON and OF by pulling out the crown to the first click even when not in the alarm correction state. 1. Pull out the crown to the first click in the alarm mode to allow the alarm to be switched ON and OF. 2. Pressing button (B) switches the alarm ON and OF each time it is pressed. 3. Return the crown to the normal position after the alarm has been set to ON or OF. 1. Pressing button A and B simultaneously during the normal alarm display causes the alarm to sound for as long as they are pressed. 12. USING THE CHRONOGRAPH The chronograph is able to measure and display time up to a maximum of 23 hours, 59 minutes, 59.99 seconds in 1/100th second units. After 24 hours have elapsed, the chronograph automatically returns to the chronograph reset display (00'00"00) and stops. Normal Chronograph Display 1. Turn the crown to set the mode hand to the chronograph [CHR] mode. 2. Pressing button A repeatedly starts and stops the chronograph each time it is pressed. 3. Split time is displayed for 10 seconds when button (B) is pressed during chronograph measurement. 4. Pressing button (B) while the chronograph is stopped returns the chronograph to the chronograph-reset display. The "SPL" mark flashes during split time display. Return to Table of Contents Return to Table of Contents sjb The lower digital display will show 0H when entering the chronograph mode. This is the zero hour starting position for the chronograph. During chronograph operation, this will increment at each elapsed hour up to 24H. At 24 hours, the chronograph returns to the 0H display. sjb sjb 13. USING THE TIMER The timer can be set to a maximum of 99 minutes in 1-minute units. When the set time has elapsed, a tone indicating that the set time is up sounds for about 5 seconds, after which the timer returns to the timer initial setting display. 1. Turn the crown to set the mode hand to the timer [TMR] mode. 2. Pull out the crown to the second click (timer setting position) to enter the "minutes" correction state. 3. When the crown is turned forward (clock- wise) in the "hours" or "minutes" correction state, correction can be made in the positive direction. When the crown is turned backward (counter-clockwise), correction can be made in the negative direction. 4. After setting, return the crown to the normal position. 1. Press button (A) to start the timer. 2. Pressing button (A) again during measurement stops the timer. 3. Pressing button (B) during measurement returns the watch to be timer initial setting display and resumes measurement. 4. Pressing button (B) when the timer is stopped returns the watch to the timer initial setting display. Return to Table of Contents Return to Table of Contents 14. USING ZONE SETTING The zone setting function enables only those cities for which "SET" has been selected to be easily accessed (displayed) in each mode. Daylight savings time can be also be set for each city. In addition, the user is also able to arbitrarily register one city and time difference. 1.Turn the crown while in the normal position and set the mode hand to the mode setting [SET] mode. 2. The city can be changed by pulling out the crown to the first click (for changing cities between SET and OF and for setting the location for switching to daylight saving time). 3. Turn the crown to access the city to be set. Turning the crown continuously causes the cities to advance rapidly. 4. Press button (A) to set the city and press button (B) to set daylight savings time. 5. After setting, return the crown to the normal position. 1. When button (A) or button (B) is pressed when the watch is in the zone setting [SET) mode (with the crown in the normal position), the city name and SET or OF are displayed each time the button is pressed. x� Only those cities for which SET is displayed can be accessed from each mode. 1. Turn the crown while in the normal position and set the mode hand to the zone setting [SET] mode. 2. When the crown is pulled out to the second click (city setting position), the watch enters the correction state for the third letter of the city name. 3. Turning the crown displays those characters that are used for city names. Turning the crown continuously causes the characters to advance rapidly. 4. The correction location changes each time button (A) is pressed. 5. When button (A) is pressed during the correction state of the first character of the city name, the watch enters the correction state for the time differenc