Eink屏幕资料(9.7寸)

The copyright belongs to PVI. Any unauthorized use is prohibited. E D097OC 1 The information contained herein is the exclus ive property of P rime V iew International C o., Ltd. and s hall not be dis tributed, reproduced, or dis clos ed in whole or in part without prior written permis s ion of P rime V iew International C o., Ltd.P AG E :1 V ers io n: 2.0 T E C HNIC AL S P E C IF IC AT ION MODE L NO. : E D097OC 1 T he content of this information is subject to be changed without notice. Please contact PV I or its agent for further information C us tomer•s C onfirmation C ustomer Date B y Confirmed B y Prepared B y P-511-534(V :2), DO-2009-047_2, Issue date :2009/02/04 V er:002 1/18 FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 Http://www.AZDISPLAYS.com The copyright belongs to PVI. Any unauthorized use is prohibited. ED097OC1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:2 Revision History Rev. Issued Date Revised Contents 1.0 Set.10.2008 New 2.0 November.7.2008 Add Page 7 6-2) Absolute maximum rating Page 12 Note 8-1 Modify Page 4 3. Mechanical Specifications Page 10 7. Power on Sequence Page 12 8-1)Specifications Add Contrast ratio Typ= 7 Update time 1000/540 change to 780/260 ( 2-4 bits/1bits) Page 19 14. Packing P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 Ver:002 2/18 The copyright belongs to PVI. Any unauthorized use is prohibited. ED097OC1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:3 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE - Cover 1 - Revision History 2 - Contents 3 1 Application 4 2 Features 4 3 Mechanical Specifications 4 4 Mechanical Drawing of EPD module 5 5 Input/Output Terminals 6 6 Electrical Characteristics 7 7 Power on Sequence 10 8 Optical Characteristics 12 9 Handling, Safety and Environment Requirements 14 10 Reliability test 15 11 Bar Code definition 16 12 Border definition 17 13 Block Diagram 17 14 Packing 18 P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 Ver:002 3/18 The copyright belongs to PVI. Any unauthorized use is prohibited. ED097OC1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4 1. Application The display is a TFT active matrix electrophoretic display, with associated interface and control logic, and a reference system design. The 9.7” active area contains 1200x825 pixels, and has full 1~4 bit display capabilities An integrated circuit containing interface, timing and control logic is supplied with each panel. 2. Features � High contrast TFT electrophoretic � 1200x825 display � High reflectance � Ultra wide viewing angle � Ultra low power consumption � Pure reflective mode � Bi-stable � Commercial temperature range � Landscape, portrait mode � Antiglare hard-coated front-surface 3. Mechanical Specifications Parameter Specifications Unit Remark Screen Size 9.7 Inch Display Resolution 1200 (H) ͪ825(V) Pixel Active Area 202.8 (H)ͪ139.425 (V) mm Pixel Pitch 0.169(H)x0.169(V) mm Pixel Configuration Rectangle Outline Dimension 218.8(H)ͪ156.425(V)ͪ1.18(D) mm Module Weight 80̈́5 g P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 Ver:002 4/18 The copyright belongs to PVI. Any unauthorized use is prohibited. ED097OC1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5 4. Mechanical Drawing of EPD Module (71 .7 ) 11 3. 40 50 . 76 La ye r 20 8. 50 ±0 . 20 (P S) 20 5. 50 ±0 .2 0(F PL ) 21 8. 80 (P an el O ut lin e) 20 2. 80 ±0 . 00 2(A ct iv e Ar ea ) 20 4. 40 (B or de r) 16 9. 4 (19 8. 6)16 . 84 16 . 84 29 .3 8 149.93±0.20(PS) 145.13±0.20(PS) 146.93±0.20(FPL) 142.13±0.20(FPL) 139.425±0.002(Active Area) 141.025(Border) 50 . 76 (16 .2 ) (15 .1 )3.48 DE TA IL " A" (69 .5 ) (8. 4) 36 3 1.18 (8. 4) 1. 15 2. 65 10 5. 40 1.15 2.65 Ac tiv e Ar ea Ce n te r 24.9075 16 . 84 156.425(Panel Outline) 82.71 (1. 0) 43.0±0.50 (19.6) (9.5) (23 .4 ) 1 1 33 (4.58) (1. 00 ) (R 0. 50 ) VI EW " B" (1.6) R EI N FO R CI NG (P I) 0. 30 ±0 .0 56.00±0.5 0. 14 5± 0. 05 VI EW " B" Sc al e: 2/ 1 1. 18 ±0 .1 0(W IT H O U T PR O TE CT IO N M YL AR ) 38.8880 73.71 11.81 33.8455 11.81 0. 7± 0. 07 11.81 1. 024 .0 2 NO GL UE IN TH IS A RE A W IT H RE SP EC T TO HE AT BO ND IN G FP C D ET AI L" A" Sc al e: 2/ 1 N O TE : 0. 04 ±0 . 02 PR O TE CT IO N M YL AR TH IC KN ES S 1.20 MAX.(UV GLUE AREA) 2. G EN ER AL TO LE RA N CE :± 0. 3 1 1. R TV G LU E D IS PE N SE (E QU AL O R UN D ER PR O TE CT IO N M YL AR H EI G H T) P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 Ver:002 5/18 The copyright belongs to PVI. Any unauthorized use is prohibited. ED097OC1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6 5.Input/Ouput Terminals 5-1)Pinout List Pin # Signal Description 1 VNEG Negative power supply source driver 2 NC NO Connection 3 VPOS Positive power supply source driver 4 NC NO Connection 5 VSS Ground 6 NC NO Connection 7 VDD Digital power supply drivers 8 XCL Clock source driver 9 XLE Latch enable source driver 10 XOE Output enable source driver 11 XSHR Shift direction source driver 12 XSTL2 Start pulse source driver 13 D0 Data signal source driver 14 D1 Data signal source driver 15 D2 Data signal source driver 16 D3 Data signal source driver 17 D4 Data signal source driver 18 D5 Data signal source driver 19 D6 Data signal source driver 20 D7 Data signal source driver 21 NC NO Connection 22 VCOM Common connection 23 NC NO Connection 24 VGG Positive power supply gate driver 25 NC NO Connection 26 VEE Negative power supply gate driver 27 NC NO Connection 28 MODE2 Output mode selection gate driver 29 MODE1 Output mode selection gate driver 30 XRL Shift direction gate driver 31 SPV Start pulse gate driver 32 CKV Clock gate driver 33 BORDER Border connection P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 Ver:002 6/18 The copyright belongs to PVI. Any unauthorized use is prohibited. ED097OC1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7 6.Electrical Characteristics 6-1) Panel interface description This panel is intended to be driven by EPD display controller ASIC. 6-2) Absolute maximum rating 6-3) Panel DC characteristics Parameter Symbol Conditions Min Typ Max Unit Signal ground VSS - 0 - V VDD 3.0 3.3 3.6 V Logic Voltage supply IVDD VDD=3.3V - 0.75 1.5 mA VEE -21 -20 -19 V Gate Negative supply IEE GVEE =-20V - 3.9 11.7 mA VGG 21 22 23 V Gate Positive supply IGG GVDD = 22V - 3.3 9.9 mA VNEG -15.4 -15 -14.6 V Source Negative supply INEG VNEG = -15V - 44.9 89.8 mA VPOS 14.6 15 15.4 V Source Positive supply IPOS VPOS = 15V - 44.1 88.3 mA VPOS = 15V 14.6 15 15.4 V Border supply VBorder VNEG = -15V -15.4 -15 -14.6 V Asymmetry source VAsym VPOS+VNEG -800 0 800 mV VCOM -2 Adjusted -0.3 V Common voltage ICOM - 0.59 - mA Maximum power panel PMAX - - 3200 mW Standby power panel PSTBY - - 0.6 mW Typical power panel PTYP - 1500 - mW Operating temperature 0 - 50 к Storage temperature -25 - 70 к Maximum image update time at 25к - 1000 - ms Parameter Symbol Rating Unit Logic Supply Voltage VDD -0.3 to +7 V Positive Supply Voltage VPOS -0.3 to +18 V Negative Supply Voltage VNEG +0.3 to -18 V Max .Drive Voltage Range VPOS - VNEG 36 V Supply Voltage VGG -0.3 to +45 V Supply Voltage VEE -25.0 to +0.3 V Supply Range VGG-VEE -0.3 to +45 V Operating Temp. Range TOTR 0 to +50 к Storage Temperature TSTG -25 to +70 к P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 Ver:002 7/18 The copyright belongs to PVI. Any unauthorized use is prohibited. ED097OC1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8 - The maximum power and maximum currents are specified for the worse case power consumption. This occurs when 2 horizontal inverted stripped images are displayed - The typical power is the consumed power when “typical images” are displayed. - The standby power is the consumed power when the panel controller is in standby mode. - The listed electrical/optical characteristics are only guaranteed under the controller & waveform provided by PVI - Vcom is recommended to be set in the range of assigned value ̈́ 0.1V 6-4 )Panel AC characteristics VDD=3.0V to 3.6V, unless otherwise specified. Parameter Symbol Min. Typ. Max. Unit App Pin Clock frequency fckv - - 200 kHz Minimum “L” clock pulse width twL 0.5 - - us Clock rise time trckv - - 100 ns Clock fall time tfckv - - 100 ns CKV Data setup time tSU 100 - - ns Data hold time tH 100 - - ns CKV, SPV Pulse rise time trspv - - 100 ns Pulse fall time tfspv - - 100 ns SPV Clock CL cycle time tcy 50 - DC ns D0 .. D7, SPH setup time tsu 8 - - ns D0 .. D7, SPH hold time th 1 - - ns LE on delay time tLEdly 40 - - ns LE high-level pulse width tLEw 40 - - ns LE off delay time tLEoff 40 - - ns Below table CLOCK & DATA TIMING LE CL tLE tLEdly tLEoff tOUT OUT1 ~ OUT400 OUTPUT LATCH CONTROL SIGNALS P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 Ver:002 8/18 The copyright belongs to PVI. Any unauthorized use is prohibited. ED097OC1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9 CL D0~D7 tcy tsu th SPH tstls tstlh 10% 10% 10% 10% 90% 90% C K V S P V tfckv twl trckv 10 90 10 90 10 90 10 90 tus trspvtfspv th 6-5) Power Consumption Parameter Symbol Conditions TYP Max Unit Remark Maximum panel power consumption during update. - - - 3200 mW Power consumption in standby mode - - - 0.6 mW Typical panel power - - 1500 - mW P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 Ver:002 9/18 The copyright belongs to PVI. Any unauthorized use is prohibited. ED097OC1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10 7.Power on Sequence 1. VSS � VDD � VNEG � VPOS (Source driver) 2. VEE � VGG(Gate driver) VSS VDD VPOS VGG VEE V NEG Logic signal input T1:100 µs(min) T2: 0 µs(min) T3: 1000 µs (min) T6 T7 T4: 0 µs (min) T5: 0 µs (min) T6: 0 µs (min) T7: 0 µs (min) T1 T2 T3 T4 T5 P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 Ver:002 10/18 The copyright belongs to PVI. Any unauthorized use is prohibited. ED097OC1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11 ϠIt is expanded as blew. VDD VPOS VNEG VEE VGG Logic signal input Sequence Sequence Sequence Sequence Sequence Sequence P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 Ver:002 11/18 The copyright belongs to PVI. Any unauthorized use is prohibited. ED097OC1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12 8. Optical characteristics 8-1)Specifications Measurements are made with that the illumination is under an angle of 30 degrees, the detection is perpendicular unless otherwise specified. T = 25 o C SYMBOL PARAMETER CONDITIONS MIN TYP. MAX UNIT Note R Reflectance White 30 35 - % Note 8-1 Gn Nth Grey Level - - DS+(WS-DS)ͪn/(m-1) - L* - CR Contrast Ratio - 6 7 - - Tupdate Update time 2~4-bit mode 1-bit mode 780 260 - ms ms - WS: White state , DS: Dark state, Gray state from Dark to White :DSΕG1ΕG2…ΕGn…ΕGm-2ΕWS m:4Ε8Ε16 when 2Ε3Ε4 bits mode Note 8-1: Luminance meter :Eye – One Pro Spectrophotometer 8-2)Definition of contrast ratio The contrast ratio (CR) is the ratio between the reflectance in a full white area (Rl) and the reflectance in a dark area (Rd): CR = Rl/Rd Light Sensor Driving Circuit Panel Light Source P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 Ver:002 12/18 The copyright belongs to PVI. Any unauthorized use is prohibited. ED097OC1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13 8-3)Reflection Ratio The reflection ratio is expressed as: R = Reflectance Factorwhite board x ( Lcenter / Lwhite board ) Lcenter is the luminance measured at center in a white area (R=G=B=1). Lwhite board is the luminance of a standard white board. Both are measured with equivalent illumination source. The viewing angle shall be no more than 2 degrees. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 Ver:002 13/18 The copyright belongs to PVI. Any unauthorized use is prohibited. ED097OC1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14 9.HANDLING, SAFETY AND ENVIROMENTAL REQUIREMENTS WARNING The display glass may break when it is dropped or bumped on a hard surface. Handle with care. Should the display break, do not touch the electrophoretic material. In case of contact with electrophoretic material, wash with water and soap. CAUTION The display module should not be exposed to harmful gases, such as acid and alkali gases, which corrode electronic components. Disassembling the display module can cause permanent damage and invalidate the warranty agreements. Observe general precautions that are common to handling delicate electronic components. The glass can break and front surfaces can easily be damaged. Moreover the display is sensitive to static electricity and other rough environmental conditions. Data sheet status Product specification This data sheet contains final product specifications. Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. P-511-534(V:2), DO-2009-047_2, Issue date :2009/02/04 Ver:002 14/18 The copyright belongs to PVI. Any unauthorized use is prohibited. ED097OC1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15 10. Reliability test ʳ TEST CONDITION METHOD REMARK 1 High-Temperature Operation T = +50°C, RH = 30% for 240 hrs IEC 60 068-2-2Bp At the end of the test, electric, mechanical, and optical specifications shall be satisfied. 2 Low-Temperature Operation T = 0°C for 240 hrs IEC 60 068-2-2Ab At the end of the test, electric, mechanical, and optical specifications shall be satisfied. 3 High-Temperature Storage T = +70°C, RH=23% for 240 hrs IEC 60 068-2-2Bp At the end of the test, electric, mechanical, and optical specifications shall be satisfied.ʳ 4 Low-Temperature Storage T = -25°C for 240 hrs IEC 60 068-2-1Ab At the end of the test, electric, mechanical, and optical specifications shall be satisfied.ʳ 5 High-Temperature, High-Humidity Operation T = +40°C, RH = 90% for 168 hrs IEC 60 068-2-3CA At the end of the test, electric, mechanical, specifications shall be satisfied.ʳ 6 High Temperature, High- Humidity Storage T = +60к, RH=80% for 240hrs IEC 60 068-2-3CA At the end of the test, electric, mechanical, specifications shall be satisfied.ʳ 7 Temperature Cycle -25к�+70к, 100 Cycles 30min 30min IEC 60 068-2-14 At the end of the test, electric, mechanical, specifications shall be satisfied.ʳ 8 UV exposure Resistance 765 W/m2 for 168hrs,40к IEC60 068-2-5Sa Optical characteristics shall be satisfied.ʳ 9 Package Vibration 1.04G, Frequency: 10~50