奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
Specification
Customer
Description 3.45” TFT LCD Module
Model Name LQ035NC111
Date 2008/12/31
Doc. No.
Revision G
Customer Approval
Date
The above signature represents that the product specifications, testing regulation, and
warranty in the specifications are accepted
USER MANUFACTURER
QA Project Approved
by
Prepared
by
Checked
by
Approved by
Head Office & Factory : No. 12, Nanke 8th Rd., Tainan Science-Based Industrial Park,
Taiwan,74144 R.O.C.
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
CONTENTS
Revision Date Page Description
A 2008/2/12 all New Creation
B 2008/6/13 18 LCM PIN Definition
C 2008/7/2 4 Features
15 Optical Characteristic
D 2008/9/18 27 Outline Drawing
E 2008/9/30 5 Electrical Characteristics
6~14 AC Characteristics
15 Optical Characteristic
18~22 LCM PIN Definition
27~28 Precautions
F 2008/10/24 5 Electrical Characteristics
G 2008/12/31 4
General Spec (thickness key in wrong,
2.8mm_3.26mm)
15
Optical spec. (Brightness updated), typ:
250->300, Min 180->200nit
25
Drawing updated (Module thickness
2.8mm_3.26mm)
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
1. SUMMARY
This technical specification applies to 3.45“color TFT-LCD panel. The 3.45“ color
TFT-LCD
panel is designed for GPS, camcorder, digital camera application and other electronic
products
which require high quality flat panel displays.
This module follows RoHS.
2. FEATURES
High Resolution: 230,400 Dots (320 RGB x 240). LQ035NC111 is a transmissive type
color
active matrix liquid crystal display (LCD) which uses amorphous thin film transistor
(TFT) as
switching devices. This product is composed of a TFT LCD panel, driver ICs, FPC,
backlight unit.
,
3. GENERAL SPECIFICATIONS
Parameter Specifications Unit
Screen size 3.45(Diagonal) Inch
Display Format 320 RGB x 240 Dot
Active area 70.08(H) x 52.56(V) mm
Dot size 73x 219 um
Pixel Configuration RGB-Stripe
Outline dimension 76.9(W) x 63.9(H) x 3.26(D) mm
Display Mode Normally white/Transmissive
Surface Treatment Haze 20%
Display Garmut NTSC 60%
Input Interface Digital 24-bit RGB/SERIAL
RGB/CCIR656/CCIR601
Weight 31 g
View Angle direction 6 o’clock
Operation -20~70 �
Temperature Range Storage -30~80 �
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
4. ABSOLUTE MAXIMUM RATINGS
Item Symbol Condition Min. Max. Unit Remark
Power
Voltage
DVDD,AVDD GND=0 -0.3 5.0 V
Input Signal
Voltage
Vin GND=0 -0.3 VDD+0.3 V NOTE
Logic Output
Voltage
VOUT GND=0 -0.3 VDD+0.3 V NOTE
Note: Device is subject to be damaged permanently if stresses beyond those absolute
maximum
ratings listed above
1. Temp. _ 60 , 90% RH MAX_ .
Temp. _ 60_, Absolute humidity shall be less than 90% RH at 60_
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
5. ELECTRICAL CHARACTERISTICS
5.1. Operating conditions:
Note1. VcomH& VcomL_Adjust the color with gamma data. Vp-p should be higher
then
4V.(Option 5V)
Note: Please power on following the sequence VCC _ VDD
5.2 LED driving conditions
Parameter Symbol Min. Typ. Max. Unit Remark
LED current - 20 - mA
Power
Consumption
- 400 420 mW
LED voltage VBL+ 18.6 19.8 21 V Note 1
LED Life Time - 10,000 - - Hr Note 2,3
Note 1 : There are 1 Groups LED
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
ILED
Note 2 : Ta = 25_
Note 3 : Brightess to be decreased to 50% of the initial value
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
Note: 1. Thp + Thb = 68, the user is make up by yourself.
2. Tv = Tvs + Tvb + Tvd + Tvf , the user is make up by yourself.
3.When SYNC mode is used,1st data start from 68th Dclk after Hsync falling
Note: 1. Thp + Thb = 204, the user is make up by yourself.
2. Tv = Tvs + Tvb + Tvd + Tvf , the user is make up by yourself.
3. When SYNC mode is used,1st data start from 204th Dclk after Hsync falling
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
Figure 1 CCIR601 Horizontal Timing
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
Figure 1 CCIR601 Vertical Timing
Figure 2 CCIR656 Horizontal Timing
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
Figure 2 CCIR656 Vertical Timing
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
Figure 3 Digital RGB NTSC mode Vertical Data Format for 262TH
Figure 3 Data Transaction Timing in Serial RGB (8 bit) Interface
(SYNC Mode)
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
Figure 3 Data Transaction Timing in Serial RGB (8 bit) Interface (DE Mode)
Figure 3 Data Transaction Timing in Parallel RGB (24 bit) Interface
(SYNC Mode)
Figure 4 Data Transaction Timing in Parallel RGB (24 bit) Interface (DE Mode)
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
Figure 7 IHS and IVS timing waveforms
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
Ta=25±2_, IL=20mA
Note 1: Definition of viewing angle range
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
9. INTERFACE
9.1. LCM PIN Definition
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
Note:
1. The mode control (SEL2) not use, it can’t control CCIR601 interface. If not use
CCIR601, it
can floating.
2. For digital RGB input data format, both SYNC mode and DE+SYNC mode are
supported. If
DE signal is fixed now, SYNC mode is used. Otherwise, DE+SYNC mode is used.
Suggest
used SYNC mode. Suggest the DE signal usually pull low.
3. Usually pull high.
4. IF select serial RGB or CCIR601/656 input mode is selected, only DX0-DX7 used,
and the
other short to GND, only selected serial RGB_CCIR601/656 interface, DX BUS will
enable.
Digital input mode DX0 is LSB and DX7 is MSB.
5. Control the input data format
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
Note:
1. The test samples have recovery time for 2 hours at room temperature before the function check. In the
standard
conditions, there is no display function NG issue occurred.
2. All the cosmetic specifications are judged before the reliability stress.
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
12. OUTLINE DRAWING
QQ:1378107648 Skype:lcd.visionary
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
14 RECAUTIONS
Please pay attention to the following when you use this TFT LCD module.
14.1 MOUNTING PRECAUTIONS
(1) You must mount a module using arranged in four corners or four sides.
(2) You should consider the mounting structure so that uneven force (ex. Twisted
stress) is not
applied to the module.
And the case on which a module is mounted should have sufficient strength so that
external
force is not transmitted directly to the module.
(3) Please attach a transparent protective plate to the surface in order to protect the
polarizer.
Transparent protective plate should have sufficient strength in order to the resist
external
force.
(4) You should adopt radiation structure to satisfy the temperature specification.
(5) Acetic acid type and chlorine type materials for the cover case are not describe
because
the former generates corrosive gas of attacking the polarizer at high temperature and
the
latter causes circuit break by electro-chemical reaction.
(6) Do not touch, push or rub the exposed polarizers with glass, tweezers or anything
harder
than HB pencil lead. And please do not rub with dust clothes with chemical treatment.
Do not touch the surface of polarizer for bare hand or greasy cloth. (Some cosmetics
are
determined to the polarizer)
(7) When the surface becomes dusty, please wipe gently with adsorbent cotton or
other soft
materials like chamois soaks with petroleum benzene. Normal-hexane is
recommended for
cleaning the adhesives used to attach front / rear polarizers. Do not use acetone,
toluene
and alcohol because they cause chemical damage to the polarizer.
(8) Wipe off saliva or water drops as soon as possible. Their long time contact with
polarizer
causes deformations and color fading.
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
(9) Do not open the case because inside circuits do not have sufficient strength.
14.2 OPERATING PRECAUTIONS
(1) The spike noise causes the mis-operation of circuits. It should be lower than
following
voltage_V=±200mV(Over and under shoot voltage)
(2) Response time depends on the temperature. (In lower temperature, it becomes
longer.)
(3) Brightness depends on the temperature. (In lower temperature, it becomes lower)
And in lower temperature, response time (required time that brightness is stable after
turned on) becomes longer.
(4) Be careful for condensation at sudden temperature change. Condensation makes
damage
to polarizer or electrical contacted parts. And after fading condensation, smear or spot
will
occur.
(5) When fixed patterns are displayed for a long time, remnant image is likely to occur.
(6) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference shall be done by system manufacturers. Grounding and shielding
methods
may be important to minimize the interference.
14.3 ELECTROSTATIC DISCHARGE CONTROL
Since a module is composed of electronic circuits, it is not strong to electrostatic
discharge.
Make certain that treatment persons are connected to ground through wristband etc.
And don’t
touch interface pin directly.
14.4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE
Strong light exposure causes degradation of polarizer and color filter.
14.5 STORAGE
When storing modules as spares for a long time, the following precautions are
necessary.
(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent
light. Keep
the temperature between 5_ and 35_ at normal humidity.
(2) The polarizer surface should not come in contact with any other object. It is
recommended
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.
奇美3.5寸LQ035NC111 Mobile:13316676658 13113638213
that they be stored in the container in which they were shipped.
14.6 HANDLING PRECAUTIONS FOR PROTECTION FILM
(1) When the protection film is peeled off, static electricity is generated between the
film and
polarizer. This should be peeled off slowly and carefully by people who are electrically
grounded and with well ion-blown equipment or in such a condition, etc.
(2) The protection film is attached to the polarizer with a small amount of glue. Is apt
to remain
on the polarizer. Please carefully peel off the protection film without rubbing it against
the
polarizer.
(3) When the module with protection film attached is stored for a long time, sometimes
there
remains a very small amount of glue still on the polarizer after the protection film is
peeled
off. You can remove the glue easily.
(4) When the glue remains on the polarizer surface or its vestige is recognized, please
wipe
them off with absorbent cotton waste or other soft material like chamois soaked with
normal-hexane.
QQ:1378107648 Skype:lcd.visionary
Mobile:13316676658 13113638213
E-mail/msn: visionaryzhan@163.com 13316676658@189.cn
Address:Shenzhen China.