win7_蓝屏代码

win7_蓝屏代码 win7_蓝屏代码 编号 代码 含意 0x00000000 作业完成 0. 1 0x00000001 不正确的函数. 2 0x00000002 系统找不到指定的档案. 3 0x00000003 系统找不到指定的路径. 4 0x00000004 系统无法开启档案. 5 0x00000005 拒绝存取. 0x00000006 无效的代码 6. 0x00000007 储存体控制区块已毁 7. 8 0x00000008 储存体空间不足, 无法处理这个指令. 0x00000009 储存体控制区块地址无效 9. 0x0000000a 环境不正确 10. 0x0000000b 尝试加载一个格式错误的程序 11. 0x0000000c 存取码错误 12. 0x0000000d 资料错误 13. 14 0x0000000e 储存体空间不够, 无法完成这项作业. 0x0000000f 系统找不到指定的磁盘驱动器 15. 0x00000010 无法移除目录 16. 0x00000010 无法移除目录 16. 0x00000011 系统无法将档案移到 其它的磁盘驱动器 17. 0x00000012 没有任何档案 18. 0x00000013 储存媒体为写保护状态 19. 0x00000014 系统找不到指定的装置 20. 0x00000015 装置尚未就绪 21. 0x00000016 装置无法识别指令 22. 23 0x00000017 资料错误 (cyclic redundancy check) 0x00000018 程序发出一个长度错误的指令 24. 25 0x00000019 磁盘驱动器在磁盘找不到 持定的扇区或磁道. 0x0000001a 指定的磁盘或磁盘无法存取 26. 0x0000001b 磁盘驱动器找不到的扇区 27. 0x0000001c 打印机没有纸 28. 0x0000001d 系统无法将资料写入指定的磁盘驱动器 29. 0x0000001e 系统无法读取指定的装置 30. 0x0000001f 连接到系统的某个装置没有作用 31. 32 0x00000020 文件被另一进程使用中不能访问the process cannot access the file because it is being used by another process. 33 0x00000021 档案的一部份被锁定, 现在无法存取. 0x00000022 磁盘驱动器的磁盘不正确 34. 请将 (volume serial number:% 2% 3) 插入磁盘机% 1. 0x00000024 开启的分享档案数量太多 36. 0x00000026 到达档案结尾 38. 0x00000027 磁盘已满 39. 0x00000032 不支持这种网络要求 50. 0x00000033 远程计算机无法使用 51. 0x00000034 网络名称重复 52. 0x00000035 网络路径找不到 53. 0x00000036 网络忙碌中 54. 55 0x00000037 特殊的网络资源或设备不可再使用the specified network resource or device is no longer available. network bios command limit 网络bios命令已达到限制the 0x00000038 56 has been reached. 57 0x00000039 network adapter card problems. 58 0x0000003A specified server cannot perform requested job. An unexpected error occurred on the 59 0x0000003B network. 60 0x0000003C remote adapter card not compatible. The 61 0x0000003D printer queue is full. The 62 0x0000003E server space cannot store the files waiting to be printed. 63 0x0000003F waiting for the print file has been deleted. 64 0x00000040 specified network name cannot be used. 65 0x00000041 deny access to the network. 65 0x00000041 deny access to the network. 66 0x00000042 network resource type error. 67 0x00000043 network name cannot be found. 68 0x00000044 exceeds the name limit of the zone computer network adapter card. 69 0x00000045 exceeds the network BIOS job phase limit. The 70 0x00000046 remote server has been paused or is starting. 71 0x00000047 cannot connect to this remote computer at this time because the number of lines has reached an upper limit. 72 0x00000048 specified printer or disk device has been suspended. The 80 0x00000050 file already exists. 82 0x00000052 cannot build directories or files. 83 0x00000053 INT 2484 0x00000054 handles this requested storage body unusable. The name of the 85 0x00000055 proximal device is already in use. 86 0x00000056 specified network password error. 87 0x00000057 parameter error. 88 0x00000058 network data write error. 89 0x00000059 the system cannot perform any other travel at this time. 100 0x00000064 cannot build other system semaphore. 101 0x00000065 belongs to other travel specific semaphore. 102, 0x00000066 semaphore is set and cannot be turned off. 103 0x00000067 cannot specify semaphore. 104 0x00000068 cannot request a dedicated semaphore at the turn off time. 104 0x00000068 cannot request a dedicated semaphore at the turn off time. 105 0x00000069 the previous ownership of this semaphore is over. 106 0x0000006A, insert the disk into%1. 107 0x0000006B the program has stopped because the alternate disk has not been inserted. The 108 0x0000006C disk is in use or locked. 109 0x0000006D Pipe has been aborted. The 110 0x0000006E system cannot open the specified device or file. The 111 0x0000006F file name is too long. 112 0x00000070 disk space is insufficient. 113 0x00000071 does not have an internal file identifier available. The internal file identifier for the 114 0x00000072 target is incorrect. 117 0x00000075 the IOCTL call performed by the application is incorrect. 118 0x00000076 write validation parameter value incorrect. The 119 0x00000077 system does not support the required instructions. 120 0x00000078 this function is valid only in Win32 mode. 121 0x00000079 semaphore over time period. The data area of the 122 0x0000007A transmitting to the system call is too small. 123 0x0000007B file name, directory name or storage volume label syntax error. 124 0x0000007C system call level is incorrect. 125 0x0000007D disk is not set. 126 0x0000007E cannot find the specified module. 127 0x0000007F cannot find the specified program. 128 0x00000080 has no sub itinerary available for waiting. 128 0x00000080 has no sub itinerary available for waiting. 129, 0x00000081%1, this application cannot be executed in Win32 mode. The "0x00000082 Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O." 131 0x00000083 attempts to move the file pointer to the beginning of the file. 132 0x00000084 cannot set the file pointer in the specified device or file. 133, 0x00000085, JOIN, or SUBST instructions cannot be used to contain previously bonded disk drives. 134 0x00000086 attempts to combine disk drives using JOIN or SUBST instructions. The 135 0x00000087 attempts to replace the disk drive in which the JOIN or SUBST command is used. The 136 0x00000088 system attempts to remove the link relationship of an un connected disk drive. The 138 0x0000008A system attempts to combine the disk drive with the directory of the disk drive that has been combined. The 139 0x0000008B system attempts to replace the disk drive with the directory of the disk drive that has been replaced. The 140 0x0000008C system attempts to replace the disk drive with the directory of the disk drive that has been replaced. The 141 0x000000 system attempts to SUBST the disk drive into a combined disk drive directory. The 142 0x0000008E system cannot execute JOIN or SUBST at the moment. The 143 0x0000008F system cannot combine disk drives or replace directories under the same disk drive. 144 0x00000090 this directory is not a subdirectory of the root directory. 145, the 0x00000091 directory still has data. 146 0x00000092 specifies the path that has been replaced. 147 0x00000093 resources are insufficient to handle this instruction. 148 0x00000094 specified path is not available at this time. 148 0x00000094 specified path is not available at this time. 149 0x00000095 attempts to combine or replace the disk drive directory, which has been replaced by the target. The 150 0x00000096 CONFIG.SYS file does not specify system trace information, or the trace function is canceled. 151 0x00000097 specifies the incorrect number of semaphore events DosMux0000SemWait. 152 0x00000098 DosMux0000SemWait did not execute; set too many semaphore. The 153 0x00000099 DosMux0000SemWait list is incorrect. 154 0x0000009A the length limit of the storage media index you entered. 155 0x0000009B cannot create any other threads. The 156 0x0000009C receive trip refuses to accept the signal. The 157 0x0000009D section has been abandoned and cannot be locked. The 158 0x0000009E section has been unlocked. The address of the 159 0x0000009F thread identifier is incorrect. The argument string of 160 0x000000A0 passed to DosEx0000ecPgm is incorrect. 161 0x000000A1 the specified path is incorrect. 162 0x000000A2 signal wait processing. The 164 0x000000A4 system cannot create threads. 167 0x000000A7 cannot lock part of the file. The resources requested by 170 0x000000AA are in use. The lock requirement for 173 0x000000AD cancellation range is not obvious. The 174 0x000000AE file system does not support automatic change lock type. 180 0x000000B4 system found an incorrect section number. The 182 0x000000B6 operating system cannot execute%1. The 182 0x000000B6 operating system cannot execute%1. The 183 0x000000B7 file already exists. The same file cannot be created. Flag error of 186 0x000000BA transfer. 187 0x000000BB specified system flag can not be found. The 188 0x000000BC operating system cannot execute%1. The 189 0x000000BD operating system cannot execute%1. The 190 0x000000BE operating system cannot execute%1. 191 0x000000BF cannot execute%1 in Win32 mode. The 192 0x000000C0 operating system cannot execute%1. 193, 0x000000C1%1 is not the right Win32 application. The 194 0x000000C2 operating system cannot execute%1. The 195 0x000000C3 operating system cannot execute%1. The 196 0x000000C4 operating system is unable to execute this application. The 197 0x000000C5 operating system is unable to execute this application at the moment. The 198 0x000000C6 operating system cannot execute%1. The 199 0x000000C7 operating system is unable to execute this application. The section of the 200 0x000000C8 program code must not be greater than or equal to 64KB. The 201 0x000000C9 operating system cannot execute%1. The 202 0x000000CA operating system cannot execute%1. The 203 0x000000CB system cannot find the input environment option. \r 205 0x000000CD in the instruction subdirectory, there is no stroke, there is a signal handler. 206 0x000000CE file name or extension is too long. 207 0x000000CF ring 2 stack used. 207 0x000000CF ring 2 stack used. 208 0x000000D0 input generic file name * * or incorrect, or specify too many generic file name elements. The signal sent by 209 0x000000D1 is not correct. 210 0x000000D2 cannot set the signal handler. The 212 0x000000D4 section is locked and cannot be reconfigured. 214 0x000000D6 has too many dynamic linking modules attached to this program or dynamic link module. 215, 0x000000D7, Can, t, nest,, calls, to, LoadModule. 230, 0x000000E6, The, pipe, state, is, invalid. 231 0x000000E7 all pipe instances are busy. 232, 0x000000E8, The, pipe, is, being, closed. 233 0x000000e9没有进程在管道的另一端。 234 0x000000ea有更多可用的资料。 240 0x000000f0作业阶段被取消。 254 0x000000fe指定的延伸属性名称无效。 255 0x000000ff延伸的属性不一致。 259 0x00000103没有可用的资料。 266 0x0000010a无法使用复制API。 267 0x0000010b目录名称错误。 275 0x00000113延伸属性不适用于缓冲区。 276 0x00000114在外挂的档案系统上的延伸属性档案已经毁损。 277 0x00000115延伸属性表格文件满。 278 0x00000116指定的延伸属性代码无效。 278 0x00000116指定的延伸属性代码无效。 282 0x0000011a外挂的这个档案系统不支持延伸属性。 288 0x00000120意图释放不属于叫用者的mutex0000。 298 0x0000012a信号传送次数过多。 299 0x0000012b只完成读WriteProcessMemory的部份要求。 317 0x0000013d系统找不到位于讯息文件% 2中编号为0x0000 % 1 的讯息。 487 0x000001e7尝试存取无效的地址。 534 0x00000216运算结果超过32位。 535 0x00000217信道的另一端有一个行程在接送资料。 536 0x00000218等候行程来开启信道的另一端。 994 0x000003e2存取延伸的属性被拒。 995 0x000003e3由于执行绪结束或应用程序要求，而异常终止I/O作业。 996 0x000003e4重叠的I/O事件不是设定成通知状态。 997 0x000003e5正在处理重叠的I/O作业。 998 0x000003e6对内存位置的无效存取。 999 0x000003e7执行页内作业发生错误。 1001 0x000003e9递归太深，堆栈满溢。 1002 0x000003ea窗口无法用来传送讯息。 1003 0x000003eb无法完成这项功能。 1004 0x000003ec旗号无效。 1005 0x000003ed储存媒体未含任何可辨识的档案系统请确定以加载所需的系统驱动程序，而且该储存媒体并未毁损。 1006 0x000003ee储存该档案的外部媒体发出警告，表示该已开启档案已经无效。 1007 0x000003ef所要求的作业无法在全屏幕模式下执行。 1008 0x000003f0试图引用不ex0000ist令牌。 1009 0x000003f1组态系统登录数据库毁损。 1010 0x000003f2组态系统登录机码无效。 1011 0x000003f3无法开启组态系统登录机码。 1012 0x000003f4无法读取组态系统登录机码。 1013 0x000003f5无法写入组态系统登录机码。 1014 0x000003f6系统登录数据库中的一个档案必须使用或其它备份还原。 Successfully restored. 1015 0x000003F7 system login corruption. One file is damaged, or the file's system image destroys the contents of the memory, and the file cannot be recovered. An unrecoverable error occurred in the I/O operation that started the logon of the 1016 0x000003F8 system. System logon cannot be read in, written out, or updated. One of these files contains the contents of the system login in memory. The 1017 0x000003F9 system attempts to log in to the file loading system or restore the file to the system login, but the format of the specified file is not in the format of the system login file. 1018, 0x000003FA attempts to log in on the system marked "delete" and performs an illegal operation. 1018, 0x000003FA attempts to log in on the system marked "delete" and performs an illegal operation. The 1019 0x000003FB system cannot configure the space needed for the system login record. 1020 0x000003FC cannot establish symbolic links on system login codes that already have child codes or values. 1021 0x000003FD cannot establish permanent sub machine code under temporary machine code. 1022 the notification of the 0x000003FE change request is completed, but the message is not returned through the caller's buffer. Callers now need to file their own files to find out where they changed. 1051 0x0000041B control has been sent to other services in a service confrontation. The control required by 1052 0x0000041C is invalid for this service An unrecoverable error occurred in the I/O operation that started the logon of the 1016 0x000003F8 system. System logon cannot be read in, written out, or updated. One of these files contains the contents of the system login in memory. The 1017 0x000003F9 system attempts to log in to the file loading system or restore the file to the system login, but the format of the specified file is not in the format of the system login file. 1018, 0x000003FA attempts to log in on the system marked "delete" and performs an illegal operation. 1018, 0x000003FA attempts to log in on the system marked "delete" and performs an illegal operation. The 1019 0x000003FB system cannot configure the space needed for the system login record. 1020 0x000003FC cannot establish symbolic links on system login codes that already have child codes or values. 1021 0x000003FD cannot establish permanent sub machine code under temporary machine code. 1022 the notification of the 0x000003FE change request is completed, but the message is not returned through the caller's buffer. Callers now need to file their own files to find out where they changed. 1051 0x0000041B control has been sent to other services in a service confrontation. The control required by 1052 0x0000041C is invalid for this service The control required by 1052 0x0000041C is invalid for this service The "0x0000041D The service not respond to the start or control did request in timely a fashion. 1054 0x0000041E" cannot establish the thread of service. The 1055 0x0000041F service database is locked. 1056 0x00000420 this service is already in execution. The 1057 0x00000421 account name is wrong or does not exist. 1058 0x00000422 specified service pause function cannot be activated. 1059 0x00000423 specifies the loop service dependency. The 1060 0x00000424 specified service is not installed services. 1061 0x00000425 the service item cannot receive control messages at this point. The 1062 0x00000426 service has not been activated yet. 1063 0x00000427 cannot be connected to the service control program. An unexpected condition occurs when 1064 0x00000428 handles control requirements. 1065 0x00000429 specified database does not exist. The 1066 0x0000042A service returns an error code belonging to the service. 1067, 0x0000042B, The, process, terminated, unex0000pectedly. 1068 0x0000042C dependent service or group cannot be activated. 1069 0x0000042D failed to activate service because logon failed. At 1070 0x0000042E after activation, when in active service. 1071 0x0000042F specifies that the service database lock is invalid. 1072 0x00000430 specifies that the service has been marked for deletion. 1073 0x00000431 specified service already exists. The 1074 0x00000432 system is currently executing a successful configuration execution. 1075 0x00000433 dependent service does not exist or has been marked for deletion. The current activation of 1076 0x00000434 has been accepted for the last successful execution of the control settings. After the last activation of the 1077 0x00000435, there is no reactivation service. 1078 0x00000436 specifies the name already used for the service name or service display name. 1100 0x0000044C has reached the end of the tape. 1101 0x0000044D to the file mark. 1102 0x0000044E encountered the beginning or division of the tape. 1100 0x0000044C has reached the end of the tape. 1101 0x0000044D to the file mark. 1102 0x0000044E encountered the beginning or division of the tape. 1103 0x0000044F to the end of the file group. 1104 0x00000450 tape without any information. 1105 0x00000451 tape cannot make partition. When 1106 0x00000452 accesses a new volume of a volume, it is found that the current block size is incorrect. 1107 0x00000453 cannot find the tape partition information when loading the tape. 1108 0x00000454 cannot lock the storage media back band function. 1108 0x00000454 cannot lock the storage media back band function. 1109 0x00000455 cannot load the storage media. The storage media in the 1110 0x00000456 disk drive has been changed. 1111 0x00000457 has reset the I/O bus. 1112 0x00000458 disk drive without any storage media. 1113 0x00000459 target multi-byte code page, not corresponding to Unicode characters. The 1114 0x0000045A dynamic link library (DLL) start routine failed. The 1115 0x0000045B system is shutting down. 1116 0x0000045C cannot stop the system shutdown because no shutdown is in progress. 1117 0x0000045D cannot execute the request because of an error in the I/O device. The start of the 1118 0x0000045E sequence device failed to cancel the loading sequence driver. 1119 0x0000045F cannot open the device. This device shares the interrupt request (IRQ) with other devices. At least one other device using the same IRQ has been turned on. "0x00000460 A serial I/O operation was completed by another write to the serial port (The IOCTL_SERIAL_x0000OFF_COUNTER reached zero.)" 1121 because the 0x00000461 has passed the timeout time, the sequence I/O job is finished. (IOCTL_SERIAL_x0000OFF_COUNTER is not zero. ) 1122 0x00000462 cannot find any ID address on the disk. The 1123 0x00000463 disk sector ID field does not match the disk control card tracking address. 1124 0x00000464 floppy disk drive control card returns an error that is not recognized by floppy disk drive drivers. The 1125 0x00000465 floppy drive control card returns inconsistent results in the cache