江门到张家界旅游线路-江门到张家界自驾游攻略-江门到张家界自由行-江门到张家界自助游

江门到张家界旅游线路-江门到张家界自驾游攻略-江门到张家界自由行-江门到张家界自助游 1、火车 张家界火车站的列车不能直达广东江门，因此从江门到张家界乘坐火车出行，需要到周边最近的火车站就是广州火车站转火车或者飞机才能抵达张家界。 (1)江门—(汽车，1.5小时)—广州(火车，13-14小时)—张家界 江门汽车站至广州省站的汽车，约1.5小时抵达广州，在江门汽车总站乘坐，每20分钟一趟(6:00—21:30)。 列车时刻:广州—张家界(共2趟火车) K9064/K9065 快速 广州 14:06 张家界 03:32 13:26 81 153/158/164 K9072/K9073 空调快速 广州 20:03 张家界 09:58 13:55 143 246/254/263 张家界自助游最具有人气的五条线路 大家好，我是张家界自助游的客服，做了这么多年的客服，对于初次来张家界旅游的朋友的问也作了些总结，大多数客人准备来张家界游玩，但是不知道有哪些地方值得一玩，应当玩几天比较合适，还有大约需要多少银子等等，那么在这里，我给大家具体的介绍一下张家界倒底有哪些地方可玩的，还有根据自己的时间或爱好应当玩哪条线路会比较合适，大约会花多少银子等等，大家勿急，看了以下介绍后，相信大家一定都可以找到自己满意的答案了: 张家界旅游资源简介: 张家界旅游资源种类齐全，山、水、溶洞、漂流、人文景观、晚会俱全，主要的代表景点有: 1.精华张家界旅游景点:(都是国家4A级以上景区，是张家界旅游景区的精华) 张家界国家森林公园(门票248元+3元保险，三日有效;周票298元，一周有效。包含黄石寨、金鞭溪、袁家界、 杨家界、大观台、天子山、十里画廊等景区。是“世界地质公园”“中国第一个国家森林公园”，也是电影《阿凡达》中哈利路亚山的原型，奇幻的潘多拉世界所在地，一般游玩二到三天的时间，是来张家界旅游必玩的景区)。 天门山国家森林公园(门票258元+3元保险。天门山文化底蕴深厚，有“武陵之魂”之称，更有湘西第一神山的美誉，它兼峰、石、泉、溪、云、林于一体，集雄、奇、秀、险、幽于一身，被誉为空中原始花园。有亚州最长的天门山索道，云雾缭绕的天门仙洞，99道弯世界公路奇观(号称通天大道)、李娜别墅、鬼谷栈道、鬼谷兵盘、云梦仙顶、天门山寺、灵泉院、木石之恋等著名景点)，此景区可按排大半天的游玩时间。 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 宝峰湖(门票96元，被称为“世界湖泊经典”，主要景点由宝峰湖和鹰窝寨两大块组成。其中宝峰湖、奇峰飞瀑、鹰窝寨、一线天被称为武陵源“四绝”。是武陵源风景名胜中的精品景点,也是张家界核心景区惟一以水为主的旅游景点。曾作为2001年张家界国际森林保护节文艺表演的天然布景,在中央电视台、湖南电视台多次亮相,骤然间成为海内外游人心中胜景。它是一座罕见的高峡平湖，四面青山，一泓碧水，风光旖旎，是山水风景杰作)，此景区游玩时间为二小时。 黄龙洞(门票100元，黄龙洞是张家界武陵源风景名胜中著名的溶洞景点，因享有“世界溶洞奇观”“世界溶洞全能冠军”“中国最美旅游溶洞”等顶级荣誉而名震全球。现已探明洞底总面积10万平方米;洞体共分四层，洞中有洞、洞中有山、山中有洞、洞中有河。经中外地质专家考察认为:黄龙洞规模之大、之全、景色之美，包含了溶洞学的所有内容。黄龙洞以其庞大的立体结构洞穴空间、丰富的溶洞景观、水陆兼备的游览观光线路独步天下。)，此景区游玩时间为二小时。 猛洞河漂流(门票168元，猛洞河因“山猛似虎，水急如龙，洞穴奇多”而得名，被誉为“天下第一漂”。“张家界看山，猛洞河玩水”已是湖南湘西旅游精髓)，游玩此景区需按排一天的时间。 凤凰古城(凤凰古城城区内有近千家商铺和数千居民，游客可以自由逛古城，若要进入景点内参观，景点不单独售票，九景票价为148元/人)，凤凰古城是国家历史文化名城，曾被新西兰著名作家路易艾黎称赞为中国最美丽的小城。这里与吉首的德夯苗寨，永顺的猛洞河，贵州的梵净山相毗邻，是怀化、吉首、贵州铜仁三地之间的必经之路。作为一座国家历史文化名城，凤凰的风景将自然的、人文的特质有机融合到一处，透视后的沉重感也许正是其吸引八方游人的魅力之精髓。这座曾被新西兰作家路易艾黎称作中国最美丽的小城之一的“凤凰古城”建于清康熙时，这颗“湘西明珠”是名副其实的“小”，小到城内仅有一条像样的东西大街，可它却是一条绿色长廊。此景点离张家界车程为4.5个小时左右，一般游玩一到二天时间即可。 2. 张家界的人文类景观 土家风情园(门票120元，集中展示了湘西土家族的宗教、演艺、建筑、手工艺、服饰、饮食等文化，是历代土家族首领所居住的地方，拥有世界上最高的吊脚楼，如果你想感受到灿烂缤纷的湘西土家族非物质文化遗产的魅力，是你到张家界旅游必须游玩的第一站)，游玩时间:2小时。 老院子(门票98元。湖南省重点文物保护单位，始建于清雍正初年，其建筑风格为四井封火墙式土家建筑，融土家园林.土家吊角楼于一体，是典型的毕兹卡(土家族)居民。是整个湘西乃至全国幸存下来，保存最为完好的土家古宅，堪称土家建筑的活化石，被誉为“土家地一宅”。前国务院总理朱镕基在这里读书)，游玩时间:2小时。 3(张家界的晚会表演 天门狐仙(门票258元，该剧由山水实景演出创始人梅帅元任总策划和总导演，由享誉世界的音乐大师、上海世博会文化大使谭盾任音乐艺术总监。体现湖湘文化深厚积淀、充满浓郁民族文化特色、展现潇湘大地多彩民俗风情的艺术盛宴从此横空出世。气势磅礴的宏大场面、强烈震撼的视觉冲击、美轮美奂的舞蹈音乐让现场观众如痴如醉)，位于市区不远处，如您的行 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 程有在市区住一晚，那么晚上当去看看了。 魅力湘西(门票240元，魅力湘西原是一部土家族记传史诗，记载了土家族的起源、传承以及在几千年的历史长河中沉淀下来的民俗风情。在这里，可以和纯正的土家族人亲密接触，体验丰富多彩的土家民俗风情，了解湘西赶尸，湘西巫术，辰州符这三大千年古迷的神秘内幕，目睹湘西奇人怪客的神功绝技)，位于武陵源镇，若您的行程有在武陵源住宿，晚上可以看看这场演出，定不会失望而归的～ 以上是张家界的一些精华游玩景点，大家看了这些后相信对张家界有了个大概的了解了，那么大家可以选择一下自己喜欢游玩的景点记下来，告诉我们想要玩哪些地方，我们可以根据您选择的景点，游玩的时间来帮您设制一条合适的行程。再给您核算出行程所需要的花费。带您渡过一个愉快的张家界之旅～～ 大家好，我是张家界自助游导游陈同程，土生土长的土家阿哥，毕业于张家界旅游学校，现在在景区内经营农家旅馆。可别看我还是一个年轻小伙哦，我的成长可是一直见证着家乡的巨变——从一个藏在深闺的秘境到举世瞩目的明珠～可以说，我是和张家界一起长大的。再加上出生在一个从事旅游的家庭，在上旅游学校之前我就已经是一个很有的导游了哦～我父亲和母亲是土生土长的当地人，也是张家界开发后最早的一批导游。2002年父母用多年的积蓄修建了家庭旅馆，因为生意不错到2010年再承租了一栋旅馆。虽说只是一个小型旅馆，为了让来这儿的客人更加满意，我家一直在努力提高服务质量。现在又整修了一下，室内设备更为齐全，居住环境也更好了。我喜欢每个来我家做客的人，来了都可以把它当自己的家;喜欢我的家乡;喜欢每次送别客人时听到他们载着满满的笑容真诚地道一声:祝你们生意兴旺，我们以后还来～我们带着一颗张家界人好客的诚心、宣传家乡回报故土的决心和为祖国旅游事业蓬勃发展贡献力量的热心在这里向海内外的各位朋友发出诚挚的邀请。 素有“奇峰三千、秀水八百”之称的人间仙境张家界就是我美丽的家乡。她的美丽和神奇，绝对不是几张图片或是几个简简单单的文字就能描绘出来的。她的神秘、都需要您亲身去体会、去感悟。她是您一生中最值得去的地方之一。来吧，亲爱的朋友，美丽的张家界在等着您～来吧，亲爱的朋友，加入张家界同程自助游俱乐部，让我们陪您一起神游张家界! 我家住在美丽的张家界群峰之下，依山而建，在张家界的怀抱长大的我深深地爱着她。爸爸妈妈已经辛苦了好多年了，作为儿子的我现在就继承了这份事业，当起了小小老板，经营着这个“家”。虽然说她比不上五星级酒店的豪华，度假村的规模，但她在我们的内心深处却有一个最普通也最温馨的名字，它叫做“家”，她身上倾注了我们一家人满满的爱，我们希望她不光是自己的家，更是每个喜欢张家界的你们短栖温暖的港湾，我们希望用“家”的热情温暖每一个路人。我爱我家，希望客人常来我家～ 为了满足客人更多的需要，最大限度方便客人的旅行，我家不仅提供住宿餐饮服务，还成立了张家界同程自助游俱乐部为客人提供自助游服务，俱乐部导游就是我的家人和亲戚(共20多人)，现在已经发展成能够每日接待客人200人的大型俱乐部了哦～ “张家界风景很美但就是景点太少～”很多跟着旅行团过来的朋友都曾这么抱怨。大错而又特错!为什么呢,告诉您吧，为最大限度营利，旅行社其实是以折扣形式来加重导游 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 负担，这样团队导游就很容易产生在山上少玩点，购物时间多一点的观念，如此下来，您248元的门票便只能看20个景点左右了，许多精华都被错过了。挺亏的，对吧,别不信哦～这可是大实话～ 但是呢，如果您放弃了这种传统的旅行方式来加入我家的俱乐部的话，您可真就赚了呢～因为——在这儿，众多精华景点任您挑，您是您双脚真正的主人～ 我们这儿的导游不是背背出来的，也不是做试卷做出来的，他们是真真正正土生土长的张家界人～他们的讲解不是在背千篇一律的导游词，也不仅仅是在叙述祖祖辈辈流传下来的美丽动人的故事，他们更是在抒发淳朴的土家人对这片土地的挚爱，向游客传递一种不加伪饰的人与自然真正的和谐之美。他们才是最了解张家界的人，他们能读懂张家界的山，张家界的水，张家界的性格，张家界的灵魂～因为他们本身就是张家界的一部分～ 您想想，在自由欣赏美丽的自然风光的同时您还能感受到原汁原味的土家人文风气，岂不妙哉!那您还等什么呢,带上您的亲朋好友或恋人赶快加入我们吧～我们期盼着您，张家界在等您～您和张家界有一个约定，您和我们有一种缘分～ 在此，我们郑重承诺: 俱乐部全团不进店、不购物，充分尊重游客意愿，设身处地为每一位客人着想～ 我们的宗旨:薄利的价格、满意的服务、让客人充分感受自助旅游的最大乐趣和方便之处，让每一位朋友爱上自助游，爱上张家界～给我一份信任，还您万份精彩～～～朋友，请相信我们～ 呵呵，看到来我家的朋友越来越多，小小老板可开心了，因为到了我家，你们就都是我的朋友了～也是张家界的朋友了～我是一个活泼开朗的男孩儿，我喜欢旅游这门行业，它让我收获了天南地北的朋友～四海之内皆兄弟，我们发自内心地欢迎每一位来这儿的朋友～请接受我们最诚挚的邀请吧～亲爱的朋友～ 接待咨询 陈同程 tel:139-7442-7236 qq:2947-42-067 张家界摄影自助游旅游网www.zjjlxb.com 张家界旅行者俱乐部www.zjjlxb.com 另外，如果您过来只是以休闲放松为主，对于景点要求不是很多或者对以上景点还不是很了解的话，您可以根据自己的时间来看看以下自助游最具人气的几条线路，打开线路后里面有具体的游玩行程、费用表(可选择适合自己的等级)、还有费用包括什么不包括什么的具体说明: 人气最高线路之一: 张家界国家森林公园二日游《此线路为二日游，如果您的时间比较紧张，可以选择这条线路，此线路是游玩来张家必看的武陵源景区，里面包括森林公园、袁家界、杨家界、天子山、索溪峪等几大部分，是短时间内玩张家界精华游线路》。 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 人气最高线路之二: 张家界国家森林公园+天门山森林公园三日游《此线路为三日游，您可以花二天时间游玩森林公园，袁家界，杨家界，天子山，索溪峪等景区，还可以花一天的时间游玩非常雄伟壮观的天门山国家森林公园。是很理想的张家界三日游线路》。 人气最高线路之三: 张家界国家森林公园三日游《此线路为三日游，三天的时间都在张家界国家森林公园内游玩，景点稍单一点，如果您对天门山、凤凰等都兴趣不大的话，不妨选择这条线路吧，这条线路在三天的时间内带您慢慢的领略森林公园、袁家界、杨家界、天子山、十里画廊等这几个景区的美。整条行程比较休闲》。 人气最高线路之四: 张家界国家森林公园+凤凰古城三日游《此线路也为三日游，您可以花二天时间游玩森林公园，袁家界，杨家界，天子山，索溪峪等景区，还可以花一天的时间游玩非常美丽的凤凰小城，如果您的时间紧张，又想观看这二个景区的话，不妨选择这条线路哟，性价比非常的高》。 人气最高线路之五: 张家界国家森林公园+天门山国家森林公园+凤凰古城四日游《此线路为四日游，是张家界地区的精华游线路，四天的时间游玩张家界、天门山、凤凰全部精华景点，前二天时间游玩森林公园，袁家界，杨家界，天子山，索溪峪等景区，第三天游玩天门山国家森林公园，第四天游玩非常美丽的凤凰小城》。 以上五条线路为目前自助游玩张家界最具人气的五条线路，您也可以根据以上推荐的线路之中选择一条自己喜欢的哟，打开红色字的链结里面将有具体的行程介绍和费用说明。 (2)江门—(汽车，1.5小时)广州—(高铁，2.5小时)—长沙—(汽车，4小时)—张家界 列车时刻:广州—长沙(高铁共54趟火车) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and (1)江门至张家界导航详细自驾车路线 全程共1100.1公里，12小时34分钟 1、从起点出发，在蓬江区城区行驶3.7公里，进入S272 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 2、沿S272行驶19公里(经江沙线公路收费站(江门))，过陈山油站约200米后稍向右转 3、行驶30米，右转走匝道(经陈山收费站(鹤山))，朝广州方向，进入佛开高速 4、沿佛开高速一直向前行驶55.5公里，在沙贝立交桥从环城高速(北行)/广清高速出口离开，进入环城高速 5、沿环城高速行驶5.4公里，从三元里/黄石路/机场高速/人和/平沙/火车站出口离开，朝机场高速/京珠高速/街北高速方向，进入机场高速 6、沿机场高速行驶45.9公里(经机场北收费站(广州))，从京珠高速/韶关/珠海出口离开，朝韶关/北京/京珠高速方向，进入京珠高速/G4 7、沿京珠高速/G4行驶601.5公里(经广东京珠北粤北收费站)，从株洲北/韶山/邵阳出口离开，遇第1个岔口走韶山/娄底/邵阳/昆明方向，第2个岔口走韶山/邵阳/昆明/娄底方向，第3个岔口向左，进入上瑞高速 8、沿上瑞高速行驶10.3公里，从湘潭/长沙/长潭西线高速出口离开(经湘潭收费站)，朝长沙/益阳方向，进入长潭西高速 9、沿长潭西高速行驶26.5公里(经湘潭收费站)，从绕城高速/常德/益阳出口离开(经含浦收费站(望城))，朝岳阳/湘阴/长常高速/常德/益阳方向，进入绕城高速 10、沿绕城高速行驶12.9公里，从长沙/益阳出口离开(经金桥收费站(望城))，朝益阳方向，进入长常高速 11、沿长常高速一直向前行驶305.4公里，过老院子约150米后稍向右转进入崇文路 12、进入永定区城区行驶5.6公里，到达终点 (3)江门至张家界地图(缩略图) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and