E+E品牌的EE160-FT3B53 0-10V资料

40 Specially designed for HVAC, the EE160 sensor by E+E Elektronik is a cost- effective, highly accurate and reliable solution for measuring relative air humidity and temperature. The enclosure minimizes installation costs and provides outstanding protection against contamination and condensation, thus ensuring flawless operation. The EE160 employs the new humidity/temperature E+E sensor element HCT01 with excellent long term stability and resistance against pollutants. In combination with a long calibration experience, the EE160 provides a measurement accuracy of ±2.5%RH and is available for wall or duct-mounted with current, voltage or Modbus RTU output. A configurator makes it possible to freely select the scaling of the temperature output and configure the Modbus parameters. The configurator software, which is free of charge, allows additionally for an on-site adjustment of the humidity and temperature. EE160 EE160 HVAC Humidity and Temperature Transmitter v1.2 Easily Adapted for the US Market » Knockout for ½” conduit fitting External mounting holes » Mounting with closed cover » Electronics protected against construction site pollution » Easy and fast mounting Bayonet Screws » Open/closed with a ¼ rotation Cast Electronics » Mechanical protection » Condensation-resistant Electronics on the Underside of the PCB » Optimum protection against mechanical damage during installation E+E Humidity sensor HCT01 » Long-term stability » Protected RH sensor surface » Protected solder pads » Tested according to automotive standard AEC-Q200 EE160 41 Measured values Relative Humidity Sensor E+E Sensor HCT01-00D Analog output 0...100% RH 0-10 V -1 mA < IL < 1 mA oder 4-20 mA (two-wire) RL < 500 Ohm Digital output* RS485 Working range 10...95% RH Accuracy at 20°C ±2.5% RH Temperature dependency typ. ±0.03% RH/°C Temperature Sensor Pt1000 (tolerance class B, DIN EN 60751) Analog output1) 0-10 V 4-20 mA Digital output* Modbus RTU T-Accuracy at 20°C ±0.3°C passive T-output see ordering code General Power supply for 0 - 10 V / RS485 15 - 35V DC or 24V AC ±20% for 4 - 20 mA 10V + RL x 20 mA < UV < 35V DC Current consumption Analog with DC power supply typ. 5mA with AC power supply typ. 13mAeff Digital* with AC power supply typ. 2mA Connection Screw terminals, max. 1.5 mm2 Housing / protection class Polycarbonate (UL listed) / IP65 Cable gland M16 x 1.5 Sensor protection membrane filter Electromagnetic compatibility EN61326-1 EN61326-2-3 Temperature ranges Operating temperature: -15...60°C ( 5...140°F) Storage temperature: -25...60°C ( -13...140°F) EE160 Technical data KABELVERSCHRAUBUNG M16x1.5 CONDUIT KNOCKOUT Type BType A Dimensions (mm) * Available from Q4/2012 1) Output scaling see Ordering Guide 42 8 7 6 5 EE160-HT3xxx EE160-HT6xxx EE160-HTx3xx* Connection diagram EE160-HT6xAPAB/Tx001M Model: humidity + temperature transmitter Analog output: 4-20mA Passive T-Sensor: Pt 100 DIN A Housing: polycarbonate Type: wall mounting Filter: membrane filter Output scaling: temperature Scaling: -30...40° Unit: metric EE160-HTx3xPBB/1AE1N Model: humidity + temperature transmitter Digital output: RS485 Housing: polycarbonat Type: duct mounting Filter: membrane filter Protocol: Modbus Baudrate: 9600 Parity: even Stopbits: 1 Unit: non-metric Order example Ordering Guide EE160 ModEl ANAloG1) dIGITAl1)* PASSIVE T-SENSoR2) HoUSING TYPE fIlTER humidity + temperature (HT) 0-10V (3) RS485 (3) Pt 100 DIN A (A) polycarbonate (P) wall mount (A) membrane filter (B) 4-20mA (6) none (x) Pt 1000 DIN A (C) duct mount (B) none (x) NTC 10k (E) none (x) EE160- oUTPUT SCAlING SCAlING UNIT temperature (Tx) -30...40° (001) metric (M) -40...60° (002) non-metric (N) -10...50° (003) 0...50° (004) other (xxx) PRoToCol BAUdRATE PARITY SToPBITS UNIT modbus (1) 9600 (A) odd (o) 1 stopbit (1) metric (M) 19200 (B) even (E) 2 stopbit (2) non-metric (N) 38400 (C) no parity (N) Configuration Interface parameter - analog output Analog output digital output Interface parameter - digital output* 1) a combination of analog and digital version is not possible 2) analogue version only * Available from Q4/2012 * only for EE160 analog version Accessories - EE160 Cabel for configuration adapter (HA011059)* - Configuration adapter (HA011050)