winDNC帮助说明(英文

winDNC帮助说明(英文 WinDNC Description Options DESCRIPTION The WinDNC application allows communication between a PC and the following FAGOR CNC families: , 8010/8020/8025/8030/800 , 8050/8055 through the RS-232, TCP/IP or Modem, as well as working with a Card A in local mode. The main window has 4 clearly defined areas : 1. Communication status: The top horizontal bar of the application shows an indicator LED for each device that is connected. That LED will turn on when communication has been established with the corresponding device. 2. Option bar: The vertical bar shows the options that may be selected at the time. The options displayed change depending on the selected type of device and the task the operator is carrying out. By default, it displays the main options of the application. 3. Work area: It is the area showing the windows that let the user carry out the different tasks. 4. Status bar: The horizontal bar at the bottom of the application shows information about the device selected by the user as active. This information consists in: 1. Device name. 2. Work directory assigned to the device. 3. Information that depends on the means of communication assigned to the device 1. RS-232 : Baudrate configured for the port assigned to the device. 2. TCP/IP : Address assigned to the device. 4. CNC model the device corresponds to. 5. Root directory containing the folders that may be accessed from the CNC (*). If the port associated with the selected device has been properly initialized, that information will appear against a white background. Otherwise, the information will appear against a red background. (*) Only for 8050/8055 family CNC's OPTIONS The main options of the WinDNC application are: 1.Options : General setup of the application. 2.Setup : Setup of the devices. 3.Files : Operations with files (send, receive, edit, delete, etc.). 4.Infinite : Execution of infinite program. , the following are specific to the 8050/8055 family 5.Monitoring : Monitoring of PLC variables and resources. 6.Variables : Reading and writing CNC variables. 7.Remote keyboard : Remote keyboard of the CNC. 8.Telediagnosis : Telediagnosis of the CNC. OPTION 1 : OPTIONS This option shows the window for setting the general parameters of the application: , Language : To select the oplrating language of the application. , Send files: To select how to send files to the CNC o File load : If the file already exists at the CNC, it is rejected. o File Load + Delete: If the file sent already exists at the CNC, it overwrites it. OPTION 2 : SETUP The setup window lets the user define the devices to use. At first, it only shows the local device that correspondis to the user's own PC and lets work with local files without being connected to any CNC. Only the minimum options will be available. , Modify: To modify the attributes of the selected device.(1) , New :To create a new device. To create a new device, select the option New which will create the device and will show the Attributes window of the device. Once the new device has been defined, it will show the new options. , Select : Defines the device selected as active for the user.(2) , Connect : Connects the port associated with the device that could be used to carry out background tasks initialized at the CNC, to the one that is connected.(1) , Call : Opens a window to connect through the modem associated with the device.(3) , Wait call: Launches a window to wait for the CNC to establish connection through the modem associated with the device.(3) , Duplicate : Creates a new device taking as a reference the data of the currently selected device. , Remove : Removes the device from the list.(1) To create a connection between the PC and the CNC associated with the device, select Connect (or Call / Wait Call if the device is not assigned to a modem). Once the connection has been created, it will show the options. , Disconnect : Disconnects the port associated with the device. It will only be disconnected if there is no communication through it.(4) , hang up : Ends the connection via modem.(4) (1) It only appears if the device is not connected. (2) It only appears if the selected device is not the active one. (3) It only appears if the device is associated with a modem. (4) It only appears if the device is connected. Press ESCAPE to exit the window. OPTION 3 : FILES This option shows the windlw for exchanging files between the work directory defined for the active port and the CNC connected to it as well as editing and deleting files. The options of the window are : , Work directory: It opens the window for changing the work directory defined for the communications through the port. See Directory selector . , CNC unit: Shows a list of options for selecting the CNC unit to be used (Memory, Card A, Hard disk). Press Escape to return the main options of the files window. (1) , View: Shows the list of options for selecting the type of file to be used. o 8010/8020/8025/8030/800 families : Programs, Tool tables, Parameter tables. o 8050/8055 families: Programs, Tables, Screens, Symbols, Keyboard. Press Escape to return to the main options of the files window. , Refresh: Updates the information on the active list. , Change mode : Changes the window display mode. The available modes are: o Vertical tiles: It is the default mode and it shows the file listings at the PC and at the CNC in two side-by-side windows. o Horizontal tiles: It shows the file listings at the PC and at the CNC at the screen in two horizontal windows one on top of the other. o PC : It only shows the PC files. o CNC : It only shows the CNC files. , Display/Hide Comment: Displaying PC files requires opening each file and reading its comment. If the Nr. of files of a given type is too large, this process could take some time. Therefore, the following options allow enabling/disabling the display of comments. , Adjust Columns : Adjusts the size of the columns of the file listings so all the columns are visible. The rest of the operations are carried out with the following buttons: Selects all the files of the active list. Cancels the selection of all files on the active list Sends the files selected from the PC file listing to the CNC. The button appears disabled when , no files are selected at the PC file listing, , or the user is currently working with the CNC list. Sends the files selected from the CNC file listing to the PC. The button appears disabled when , no files are selected at the CNC file listing, , or the user is currently working with the PC listing. Opens the window for editing the file selected from the active list. The button appears enabled only if a file has been selected and the file is , a program, , a parameter table of an 8050/8055 CNC, , or a remote-keyboard file. See Editor y Keyboard editor . Opens the window for editing a new file. The new file will be created in the PC directory. The button appears enabled only if the files shown are: , programs, , parameter tables of an 8050/8055 CNC, , or remote-keyboard files. See Editor and Keyboard editor . Prints the files selected on the CNC file listing. The button appears disabled if there are no files selected on that list. Only editable files may be printed. Eliminates the files selected on the active file list. The button appears disabled when , there are no files selected on the active file list, , or the selected files cannot be deleted (Screens/symbols on the CNC list) [F2] It allows renaming the local file currently selected, only if a single file is selected. (1) This option only appears if the CNC we are connected to allows selecting the work unit. Press ESCAPE to exit the window. OPTION 4 : INFINITE This option shows the window for executing infinite programs. The screen is divided into two areas: , Area for selecting the execution parameters , where it is possible to o select the program to be executed from the list of programs located at the PC, o and enter the execution parameters (starting block, nr of times to execute the program and how to execute it). , Display area for the status of the execution in progress , which shows o Name of the program being executed, o First block being executed. o Execution mode used. o Execution status, that shows the number of executions carried out and the status of the current process which may be be , Running: The program is in execution, , CNC Cancelled: The CNC cancelled the execution. , User Cancelled: The user cancelled the execution. , Error XXXX: Error that came up during execution. , Completed: The execution of the infinite program completed successfully. The options displayed will depend on the status of the window. When not running the infinite program, it will display: , Work directory: Opens a window for changing the work directory for the communication through the Directory selector . port. See , Refresh : It refreshes the list of programs that can be executed. , Execute infinite: It takes the data from the selection area and uses them to execute the infinite program. And when executing, it will display: , Stop Infinite: It interrupts the execution of the infinite program. The execution will stop automatically if interrupted from the CNC. Press ESCAPE to exit this window. OPTION 5 : MONITORING This option gives access to the window where one can monitor CNC variables as well as PLC resources. The options appearing when not monitoring are: , Start : If the list of variables to be monitored is not empty, it will start monitoring them. , Add Variables : Shows the window for selecting the variables to be monitored. , Modify PLC/CNC : Shows the window for modifying the value of the PLC resources and CNC variables. , Clear List: It empties the list of variables to be monitored. , Load List: It opens the window for selecting a file which contains the list of the variables to be monitored. See File selector . , Save List: It opens the window for selecting the file where the list of variables being monitored is to be saved. See File selector . , whereas the only option appearing while monitoring is: , Stop : It stops monitoring. Monitoring will stop automatically when it has not been possible to read any of the variables to be monitored. Press ESCAPE to exit this window. OPTION 6 : VARIABLES This option gives access to the window where CNC variables can be read or written. These variables appear on a list which shows the following data: , Variable : Name of the variable. , Info : A little explanatory text. , Last Operation : The result of the last read/write operation (Note: this information disappears when changing the group of variables). Those variables that may be modified will have a "pencil" icon. To read the variable of the variable, press Enter when the cursor is on the variable. To modify its value, place the cursor on the variable and start editing; press Enter to accept the new value or Escape to leave it as it was. The group of variables on display is shown at the program header. To change the group of variables to be displayed, click on the name of the current group of variables and a drop list will appear with the available groups. The options shown by the window are: , Find Variable : It shows a window for entering the name of the variables to search for. If found, the group of variables it belongs to will be selected automatically. Press ESCAPE to exit this window. OPTION 7 : REMOTE KEYBOARD It allows accessing the window for remote keyboard simulation. The keystrokes are sent out when pressing their corresponding keys at the keyboard (alphanumeric and F1 through F7) and the buttons on the screen. The options for this window are: , Work Directory : Opens the window to change the work directory defined for communicating through the port. See Directory selector . , Clear Screen : Clears the screen that shows the keystroke sequence sent out. , Save Sequence : To select the file that will store the keystroke sequence appearing on the screen. , Exit : To exit the window. OPTION 8 : TELEDIAGNOSIS It opens a window so the operator can control the CNC through a remote keyboard; the window also shows a reflection of the CNC window. The keys are sent out when pressing their corresponding ones on the keyboard (alpha-numeric and F1-F7) and the screen buttons. The options of this window are: , Keyboard Enabled/Disabled : To change the status (enabled / disabled) of the CNC keyboard being monitored. , Screen Enabled/Disabled : To change the status (enabled / disabled) of the screen being monitored. , Save Image : To select the file that will store the captured CNC screen. , Send sequence: To select a key file to be sent to the CNC. , Exit : To exit the window. Window for device attributes For modifying the attributes of a device. On one hand, it will display the attributes common to all types of devices. , Name : Name or alias identifying the device. , Model : CNC model associated with the device. , Type : Type of device, choose between , Serial line (RS-232) , Modem (1) , Network node (TCP/IP) (1) , Card A (1)(2) , Work folder : Work folder associated with the device which will store the files exchanged while communicating with the CNC. , CNC operator's work folder : Root folder that limits the access for the CNC operator. And, on the other hand, those particular attributes of a serial line device. , Connect on startup : It connects the device when starting up the application. , Port : RS-232 port associated with the device. , Speed : Baudrate (BD) for the port assigned to the device. or network node , Connect on startup : It connects the device when starting up the application. , IP address : IP address assigned to the CNC. (1) Only 8050/8055 family models. (2) Only available for Windows 2000 and Windows XP. Press ESCAPE to exit this window. File selector This window may serve to select a file to be later used by the window through which the File Selector was accessed. This window shows the list of the current files (whose location will depend on the selected work directory and type of file) with the following information: , Name : File name. , Size : File size (bytes). , Date : Date of last change. The displayed options depend on whether a file is being selected or saved: , Refresh : To refresh the data in the window. , New file : To select a new file. , Delete : To delete the selected file. Press ESCAPE to exit this window. Directory Selector The operator may use this window to carry out the following actions: , Select : Selects the folder on which the cursor is positioned. Its usage depends on the window used to get to the directory selecting window. , New : Shows a dialog box to select both the name of the new folder and subfolders to be created (programs, files, tables, graphics files, keyboard files). Press Enter to create a new folder under the one on which the cursor is currently positioned. , Rename : To change the name of a folder on which the cursor is currently positioned. , Remove : Eliminates the folder on which the cursor is positioned as well as all its contents. Press ESCAPE to exit this window. Editor The operator may use this editor to edit CNC programs and tables. Its main options are: , Go to line : To go to the specific line of the document being edited. , Find/Replace : Shows the dialog box for searching and replacing text. , Print : Prints the document being edited. , Empty Contents : Empties the document being edited. , Save : Saves the changes made to the active document. If the document being edited is new and File selector Where it does not have a name yet, the the operator may give a name to the file. The operator can also use markers to move around in the document. The keystroke combinations for the markers are : Ctrl+[0-9] : Turn marker 0-9 ON/OFF. Alt+[0-9] : Go to marker 0-9. Ctrl+F2 : Turn marker ON/OFF. Shift+F2 : Go to next marker. Ctrl+Shift+F2 : Turn all markers OFF. Ctrl+Z : Undo last operation. Ctrl+Y : Redo last operation. Ctrl+X : Cut selected text. Ctrl+C : Copy selected text. Ctrl+V : Paste previously cut/copied text. While the operator works with the editor, the status bar at the bottom of the application shows the line number and the column where the cursor is. Press ESCAPE to exit this window. Keyboard Editor It is an editor very similar to the Remote Keyboard window. It allows editing a keyboard simulation file which can later be sent to the CNC through the Files window. Its main options are : , Empty Contents : Empties the document being edited. , Save : Saves the changes made to the active document. It will display a dialog box to enter the name and comments of the file. If it is a new document that has no name yet, it displays the File selector window so the operator can give it a name. , Exit : To exit the editor. It is edited using the alphanumeric keyboard, function keys F1 through F7 and the buttons on the screen. NOTE : The size of the sequence to be edited is limited. Therefore, when reaching this limit, the keystrokes will be ignored.