中英文对照 石油化工行业制造
清单
1) Please find attached the list of international codes and standards to be applied for the design and manufacturing of the whole supply (doc n. 0002-00-00-000-B-G-1-43-002)
随函附上全部供应材料设计和制造中应用的国际
和标准一览表(文件号
0002-00-00-000-B-G-1-43-002)。
Please kindly confirm compliance; moreover, please confirm that it is already included in your quotation or update accordingly.
请确认符合情况,此外,请确认其已相应包含在贵方报价或更新文件中。
2) ASTM / ASME standard Materials with proper certifications (refer to attached material certificate EN 10204 3.1 samples) shall be provided for the whole supply materials; equivalent Chinese standard material are not accepted by our Client (except the ones listed in the attached doc n. 0002-00-00-000-B-G-1-43-002 section 3). 应为全部材料提供ASTM/ ASME标准材料和适当的认证(参考随附的材料证书EN 10204 3.1),我们的客
户不接受同等的中国标准材料(随附文件号0002-00-00-000-B-G-1-43-002第3节列出的材料除外)。
Please kindly confirm compliance; moreover, please confirm that it is already included in your quotation or update accordingly.
请确认符合情况,此外,请确认其已相应包含在贵方报价或更新文件中。
(See attached file: 0002-00-00-000-B-G-1-43-002_D.doc) (See attached file: material test certificates samples. rar)
(参考随附文件:0002-00-00-000-B-G-1-43-002_D.doc)(参考随附文件:材料测试证书样本.rar)
LIST OF APPLICABLE INTERNATIONAL / NATIONAL CODES AND STANDARDS
适用的国际/国家规范和标准一览表
INDEX(检索)
Page(页码)
1. International Standards (Foreign Standards internationally acknowledged) 3 1. 国际标准(国际公认的国外标准) 3
2. National Standards of other countries referenced to International Standards and acknowledge by
Cuban Authorities 41
2.其他国家参照国际标准并由古巴当局认可的国家标准 41
3. National Standards of other countries not referenced to International Standards and not
acknowledge by Cuban Authorities (Chinese standard) 48
3.其他国家未参照国际标准且未被古巴当局认可的国家标准(中国标准) 48
1. International Standards (Foreign Standards internationally acknowledged)
1. 国际标准(国际公认的国外标准)
AASHTO - American Association of State Highway and Transportation Officials AASHTO—美国国家公路与运输协会
GDPS-4-M Guide for Design of Pavement Structures
路面结构设计指南
AASHTO Bridge Design Specifications
桥梁设计规范
M145 Classification System for Soil
土壤分类系统
M226 Viscosity Graded Asphalt Cement
粘度级沥青胶合剂
T166 Bulk Specific Gravity of Compacted Bituminous Mixtures
压实沥青混合料毛体积比重
ACI - American Concrete Institute
ACI-美国混凝土学会
117 Standard Specifications for Tolerances for Concrete Construction and
Materials
混凝土施工与材料公差的标准规格 207.1R Mass Concrete
大体积混凝土
211.1 Standard Practice for Selecting Proportions for Normal, Heavyweights, and
Mass Concrete
常规、重型和大体积混凝土选择比例标准规程 223 Standard Practice for the Use of Shrinkage-Compensating Concrete
收缩补偿混凝土使用标准规程
301 Specifications for Structural Concrete for Buildings
建筑用结构混凝土规格
302.1R Guide for Concrete floor and slab constructions
混凝土地面和平板结构指南
Guide for the use of Pre-placed Aggregate Concrete for Structural and Mass
304.1R Concrete Applications
结构和大体积混凝土应用预填骨料混凝土使用指南 304.2R Placing concrete by pumping methods
用泵送
浇筑混凝土
Heavyweight Concrete: Measuring, Mixing, Transporting, and Placing 304.3R 重混凝土:计量、搅拌、运输及配售
Placing Concrete with Belt Conveyors 304.4R 配售混凝土带式输送机
Batching, Mixing, and Job Control of Lightweight Concrete 304.5R 轻质混凝土配料、混合及作业控制
Guide for the Use of Volumetric–Measuring and Continuous–Mixing
304.6R Concrete Equipment
容积计量和连续搅拌混凝土设备使用指南 304R Guide for Measuring, mixing, transporting, and placing concrete
计量、搅拌、运输及配售混凝土指南 305R Hot weather concreting
夏季浇筑混凝土
306R Cold weather concreting
冬季浇筑混凝土
308 Standard practice for curing concrete
养护混凝土标准规程
309R Guide for Consolidation of Concrete 318 Building Code Requirements for Reinforced Concrete
钢筋混凝土建筑规范要求
Formwork for Concrete 347 混凝土用模板
350 Standard Engineering Practice for Environmental Structures
环境结构标准工程规程
439.3R Mechanical Connections of Reinforcing Bars
配筋机械连接
506.2 Specification for Shotcrete
喷浆混凝土规范
SP-66 ACI Detailing Manual
美国混凝土学会详细手册
AI - Asphalt Institute
AI-美国沥青协会
MS-2 Design Method for Asphalt Concrete and other Hot-Mix Types
沥青混凝土及其他热拌类型设计方法 MS-4 Asphalt Handbook
沥青手册
SS-1 Model Construction Specifications for Asphalt Concrete and Other Plant-Mix
Types
沥青混凝土及其他厂拌类型模型建构规范 SS-2 Specifications for Pavings and Industrial Asphalt
铺面材料和工业沥青规范
AISC - American Institute of Steel Construction
AISC-美国钢结构学会
303 Code of Standard Practice for Steel Buildings and Bridges
钢结构建筑和桥梁标准规程规范
348 Specification for Structural Joints using High strength bolts
使用高强度螺栓的结构缝规范
360 Specification for Structural Steel Buildings
钢结构建筑规范
AISI - American Iron and Steel Institute
AISI-美国钢铁学会
4140 Alloy Steel Plates
合金钢板
ANSI - American International Standards Institute
ANSI-美国国家标准学会
ANSI/FCI 70-2 Control Valves Seat Leakage
控制阀门座泄露
ANSI/ISA MC-96.1 Temperature Measurement Thermocouples
温度测量热电偶
ANSI/TIA-568-C.1 General Requirements
通用要求
ANSI/TIA-568-C.3 Optical Fibre Cabling Component Standard
光纤布线组件标准
ANSI-J-STD-607-A Grounding and Bonding Requirements for Telecommunications in
Commercial Buildings
商用建筑物的电信接地和连接安全性要求 ANSI/NSC Z16.5 Occupational Safety and Health Incident Surveillance - Now Copyrighted by
NSC
职业安全及健康事件监控——现版权归美国安全委员会所有 ANSI Z400.1/Z129.1-2010 Hazardous Workplace Chemicals – Hazard Evaluation and Safety Data Sheet
and Precautionary Labeling Preparation
工作场所危险化学品–危害评估和安全数据表和预防标签准备标准
API - American Petroleum Institute
API-美国石油学会
API 2C VI Ed. Specification for Offshore Pedestal Mounted Cranes API 2C第6版 近岸支座式起重机规范
API 5L IV Ed. Specification for Line Pipe
API 5L第4版 线管规范
API 6D XX Ed. Specification for Pipeline Valves (Gate, Plug, Ball and Check Valves) API 6D第20版 管道阀门(闸阀、插头、球阀和止回阀)规范 API 510 Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and
Alteration
(Note: only for the existing pressure vessel that will be reused)
压力容器检验规范:运行中检查、评级、修复和改造
(注:仅适用于将重新利用的现有压力容器) API 520 Part 1 - VIII Ed. Sizing, Selection, and Installation of Pressure-relieving Devices in Refineries
API 520第1部分-第8版 Part I - Sizing and Selection - EIGHTH EDITION
炼油厂泄压装置的尺寸确定、选择和安装
第1部分—设置和选择—第八版
API RP 520 Part 2 - V Ed. Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries
API RP 520第2部分-第5版 Part II—Installation - Fifth Edition
炼油厂泄压装置的尺寸确定、选择和安装
第2部分—安装—第五版
API 521 V Ed. Press. Relieve and Depr. System
API 521第5版 泄压和减压系统
API 526 VI Ed. Flanged Steel Pressure Relief Valves
API 526第6版 钢制法兰连接泄压阀
API 527 III Ed. Commercial Seat Tightness of Safety Valves with Metal to Metal Seats API 527第3版 带金属与金属连接阀座的安全阀的商业阀座气密性 API 530 VI Ed. Calculation of Heater-tube Thickness in Petroleum Refineries API 530第6版 炼油厂中加热器管厚度的计算
API 537 II Ed. Flares
API 537第2版 照明弹
API 560 IV Ed. Fired Heaters for General Refinery Services API 560第4版 炼油厂通用燃料加热器
API 594 VII Ed. Check Valves: Wafer, Wafer-Lug and Double Flanged Type API 594第7版 止回阀:盘式、盘式—凸耳及双法兰式 API 598 IX Ed. Valve Inspection and Testing
API 598第9版 阀门检验和测试
API 599 VI Ed. Plug Valve
API 599第6版 旋塞阀
API 600 XII Ed. Steel Gate Valves Flanged and Butt Welding Ends API 600第12版 连接钢制闸阀法兰和对焊端部
API 602 IX Ed. Compact Steel Gate Valve
API 602第9版 紧凑型钢制闸阀
API 603 VII Ed. Corrosion-resistant, Bolted Bonnet Gate Valves – Flanged and Butt-welding
API 603第7版 Ends
耐腐蚀螺栓连接阀盖闸阀,法兰端和焊接端 API 607 VI Ed. Fire Test for Soft-Seated Quarter Turn Valves API 607第6版 软座式直角回转阀的防火试验
API 608 IV Ed. Metal Ball Valves - Flanged and Butt-Welding Ends API 608第4版 金属球阀—法兰端和焊接端
API 609 VII Ed. Butterfly Valves: Double Flanged, Lug and Wafer Type API 609第7版 双法兰连接、凸耳及饼式蝶阀
API 610 X Ed. Centrifugal Pumps for General Refinery Services API 610第10版 炼油厂通用离心泵
API 611 IV Ed. General Purpose Steam Turbine for Refinery Services API 611第4版 炼油操作用一般用途蒸汽透平机
API 612 VI Ed. Special Purpose Steam Turbine for Refinery Services API 612第6版 炼油操作用特殊用途蒸汽透平机
API 613 V Ed. Special Purpose Gear Units
API 613第5版 特殊用途齿轮装置
API 614 V Ed. Lubrication, Shaft-sealing and Oil-control Systems and Auxiliaries API 614第5版 润滑、轴密封和控制油系统及辅助设备 API 617 VII Ed. Axial and Centrifugal Compressors and Expander-compressors API 617第7版 轴流和离心压缩机及膨胀机-压缩机
API 618 V Ed. Reciprocating Compressors for Petroleum, Chemical and Gas Industry
API 618第5版 Services
石油、化学和气体工业用往复式压缩机 API 619 IV Ed. Rotary-type Positive Displacement Compressors for General Refinery
API 619第4版 Services
炼油厂通用旋转式容积式压缩机
API 620 XI Ed. Design and Construction of Large, Welded, Low-Pressure Storage Tanks API 620第11版 大型低压焊接储油罐的设计与施工
API 650 XI Ed. Steel Welded Tanks for Oil Storage
API 650第11版 钢制焊接油罐
API 653 Tank Inspection, Repair, Alteration, and Reconstruction
(Note: only for the existing tanks that will be reused)
油罐检测、修理、改造和重建
(注:仅适用于将重新利用的现有油罐) API 660 VIII Ed Shell and Tube Heat Exchangers for General Refinery Services API 660第8版. 炼油厂通用管壳式换热器
API 661 VI Ed. Air Cooled Heat Exchangers for General Refinery Services API 661第6版 炼油厂通用空冷式热换器
API 662 Plate Heat Exchangers for General Refinery Service
炼油厂通用板式换热器
API 662 Part 1 - I Ed. Plate and Frame Heat Exchangers
API 662第1部分-第1版 板式及框架式换热器
API 662 Part 2 – I Ed. Brazed Aluminium Plate-fin Heat Exchangers API 662第2部分-第1版 钎焊铝板翅式换热器
API 670 IV Ed. Machinery Protection System
API 670第4版 机械保护系统
API 671 IV Ed. Special-Purpose Couplings
API 671第4版 专用联轴器
API 672 IV Ed. Packaged, Integrally Geared Centrifugal Air Compressors API 672第4版 组装型整体齿轮增速离心式空气压缩机 API 673 II Ed. Centrifugal Fan
API 673第2版 离心通风机
API 674 II Ed. Positive Displacement Pumps – Reciprocating API 674第2版 容积式往复泵
API 675 II Ed. Positive Displacement Pumps – Controlled Volume API 675第2版 容积式可控制排量泵
API 676 III Ed. Positive Displacement Pumps – Rotary API 676第3版 容积式转子泵
API 677 III Ed. General-Purpose Gear Units for Petroleum, Chemical and Gas Industry
API 677第3版 Services
石油、石化和天然气工业用一般用途齿轮装置 API 681 I Ed. Liquid Ring Vacuum Pumps and Compressors API 681第1版 液环真空泵和压缩机
API 682 III Ed. Pumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps API 682第3版 泵—离心泵转子泵用轴密封系统
API 685 II Ed. Sealless Centrifugal Pumps for Petroleum, Petrochemical, and Gas Industry
API 685第2版 Process Service
石油、石化和天然气工业用无密封式离心泵
API 686 II Ed. Recommended Practices for Machinery Installation and Installation Design
API 686第2版 机械设备安装和安装设计建议惯例
API 1104 XX Ed. Welding of Pipelines and Related Facilities
API 1104第20版 管道及附件焊接
Computational Pipeline Monitoring API 1130 计算管道监测
Evaluation Methodology for Software Based Leak Detection Systems API 1155 基于管道泄露检测系统软件的评估方法论
API 2000 VI Ed. Venting Atmospheric and Low-pressure Storage Tanks
API 2000第6版 排气大气和低压储油罐
API 2218 II Ed. Fireproofing Practices in Petroleum and Petrochemical Processing Plant
API 2218第2版 石油和石化加工厂的防火措施
API 2510 VIII Ed. Design and Construction of LPG Installations
API 2510第8版 液化石油气设施的设计与施工
API 2510 A II Ed. Fire-Protection Considerations for the Design and Operation of Liquefied
API 2510 A第2版 Petroleum Gas (LPG) Storage Facilities
设计和操作液化石油气(LPG)储存设备的防火事项
API 2534 I Ed. Measurement of Liquid Hydrocarbons by Turbine Meter Systems
API 2534第1版 涡轮流量计系统测量液态烃
API RP 2A WSD – XXI Ed. Recommended Practice for Planning, Designing and Constructing Fixed
API RP 2A WSD第21版 Offshore Platforms - Working Stress Design
海上固定平台规划、设计和建造的推荐作法—工作应力设计法
API RP 2D VI Ed. Operation and Maintenance of Offshore Cranes
API RP 2D第6版 海上平台起重机使用与维护
Heat Treatment and Testing of Large Cross Section and Critical Section
API RP 6HT Components
大断面和关键部件的热处理和测试
API RP-505 I Ed. Recommended Practice for Classification of Locations for Electrical
API RP-505第1版 Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and
Zone 2
以1级、0区、1区和2区分类的石油装置用电气设备位置分类的推荐实
施规程
API RP-535 II Ed. Burners
API RP-535第2版 燃烧器
API RP-551 I Ed. Process Measurement Instrumentation
API RP-551第1版 过程测量仪表
API RP-552 I Ed. Transmission System
API RP-552第1版 传输系统
API RP-553 I Ed. Refinery Control Valves
API RP-553第1版 炼油厂控制阀
API RP-554 Part 1 – II Ed. Process Control Systems Part 1—Process Control Systems Functions and
API RP-554第1部分-第2版 Functional Specification Development - SECOND EDITION
过程控制系统:第1部分—功能和功能规格发展的过程控制系统—第二
版
API RP-554 Part 2 – I Ed. Process Control Systems— Process Control System Design - First Edition API RP-554第2部分-第1版 过程控制系统—过程控制系统设计—第一版
API RP-554 Part 3 – I Ed. Process Control Systems— Project Execution and Process Control System
API RP-554第3部分-第1版 Ownership - First Edition
过程控制系统—项目执行和过程控制系统所有权—第一版 API RP-555 II Ed. Process Analysers (in press)
API RP-555第2版 过程分析仪(印刷中)
API RP-556 II Ed. Instrumentation & Control System for Fired Heaters and Steam Generation API RP-556第2版 发射热水器和蒸汽发生器的仪表和控制系统
API RP-557 I Ed. Guide to Advanced Control Systems
API RP-577第1版 高级控制系统指南
API RP-571 I Ed. Damage Mechanisms Affecting Fixed Equipment in the Refining Industry API RP-571第1版 影响炼油工业中固定设备的损伤机理
API RP-621 III Ed. Reconditioning of Metallic Gate, Globe, and Check Valves API RP-621第3版 金属闸阀、截止阀和止回阀的重新调整
API RP 752 III Ed. Management of Hazards Associated with Location of Process Plant API RP 752第3版 Permanent Buildings
与加工厂永久性建筑位置相关的危险管理
API RP-934-A II Ed. Low Alloy steel Heavy Wall in high Temperature and Pressure for Hydrogen
API RP-934-A第2版 Service
应用于高温高压氢工况的低合金钢的厚壁
API TR-934-B II Ed. Low Alloy steel Vanadium modified for Heavy Wall Pressure Vessels API RP-934-B第2版 为厚壁压力容器修改的低合金钢钒
API RP-934-C II Ed. Low Alloy steel Heavy Wall Pressure Vessels for High Pressure service
API RP-934-C第2版 Operating at or below 441?C
应用于高温高压工况操作温度不高于441?C的低合金钢厚壁压力容器 API TR-938-C I Ed. Use of Duplex Stainless Steel in the Oil Refinery Industry API TR-938-C第1版 石油提炼工业中双相不锈钢的使用
API RP-939-C I Ed. Guidelines for Avoiding Sulfidation (Sulfidic) Corrosion Failures in Oil
API RP-939-C第1版 Refineries
石油炼厂避免硫化腐蚀失效指南
API RP-941 VII Ed. Steel for Hydrogen Service at Elevated Temperature and Pressures in
API RP-941第7版 Petroleum Refinery and Petrochemical Plants
炼油厂和石油化工厂高温高压下氢气设备用钢 API RP-945 III Ed. Avoiding Environmental Cracking in Amine Units API RP-945第3版 避免环境因胺元素而分裂
API RP-1102 VII Ed. Steel Pipelines Crossing Railroads and Highways API RP-1102第7版 钢制管道穿越铁路和公路
Recommended Practice for Pressure Testing of Liquid Petroleum Pipelines API RP 1110 液体石油管道压力试验推荐作法
API RP-1111 IV Ed. Design, Construction, Operation, and Maintenance of Offshore Hydrocarbon API RP-1111第4版 Pipelines (Limit State Design)
碳氢化合物海底管道设计、建设、运行和维修(极限状态设计) API RP-2001 VIII Ed. Fire Proofing Practices in Petroleum and Petrochemical Processing Plants API RP-2001第8版 石油和石化加工厂防火作法
API RP-2028 III Ed. Flame Arresters in Piping Systems
API RP-2028第3版 管道系统阻火器
API RP-2030 III Ed. Application of Fixed Water Spray Systems for Fire Protection in the
API RP-2030第3版 Petroleum Industry
石油工业消防用固定喷水系统的应用
API RP-2210 III Ed. Flame Arresters for Vents of Tanks Storing Petroleum Products API RP-2210第3版 储存石油产品储罐通风口用阻火器
ASCE - American Society of Civil Engineering
ASCE-美国土木工程师协会
ASCE 7 Minimum Design Loads for Buildings & other Structures
建筑和其它结构的最小设计载荷
ASCE 15 – 98 Buried Concrete Pipes
地下混凝土管
--- Design Blast Resistant Buildings in petrochemical Plants
石化厂设计防爆建筑
ASHRAE - American Society of Heating, Refrigerating and Air-Conditioning Engineers ASHRAE-美国采暖、制冷与空调工程师学会
--- ASHRAE Handbook
ASHRAE手册
ASME - American Society of Mechanical Engineers
ASME-美国机械工程师协会
ASME B1.1 Unified inch screw threads
统一英制螺纹
ASME B1.13M Metric Screw Threads
米制螺纹
ASME B1.20.1 Pipe threads, General purpose
通用管螺纹
ASME B16.1 Cast Iron Pipe, Flanges and Flanged Fittings
铸铁管、法兰和法兰配件 ASME B16.3 Malleable Iron Threaded Fittings
可锻铸铁螺纹管件
ASME B16.5 Pipe Flanges and Flanged Fittings
管法兰和法兰管件
ASME B16.10 Face-to-Face and End-to-End Dimensions of Valves
阀门的面对面及端对端尺寸 ASME B16.11 Forged Steel Fittings, Socket-Welding and Threaded
锻钢件、承插焊和螺纹
ASME B16.14 Ferrous Pipe Plugs, Bushings and Locknuts with Pipe Threads
钢铁制管螺塞、衬套和防松螺母 ASME B16.20 Metallic Flat Gaskets for Pipe Flanges
管法兰用金属平垫片
ASME B16.21 Non metallic Flat Gaskets for Pipe Flanges
管法兰用非金属平垫片
ASME B16.25 Butt Welding Ends
对焊端部
ASME B16.34 Valves – Flanged, Threaded and Welding End
法兰,螺纹和焊接端连接的阀门 ASME B16.36 Steel Orifice Flanges
钢孔板法兰
ASME B16.42 Ductile Iron Pipe, Flanges and Flanged Fittings
球墨铸铁管、法兰和法兰管件 ASME B16.47 Large diameter steel flanges
大直径管钢制法兰
ASME B16.48 Steel Line Blanks
空白钢衬
Factory-made, Wrought Steel, Buttwelding Induction Bends for
ASME B16.49 Transportation and Distribution Systems
传输和分配系统用工厂预制锻钢对焊感应管弯头 ASME B16.5 Pipe Flanges and Flanged Fittings NPS ? trough 24
管法兰和法兰配件美国标准直管螺纹?槽24 ASME B16.9 Factory-Made Wrought Steel Buttwelding Fittings
工厂制造的锻轧制对焊管配件
ASME B18.2.1 Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex
Flange, Lobed Head, and Lag Screws (Inch Series)
四角螺栓、六角螺栓、六角重型螺栓、歪头螺栓及六角螺钉、六角重型
螺钉、六角法兰螺钉、裂头螺钉、方头螺钉(英制系列) ASME B18.2.2 Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex
Flange, and Coupling Nuts (Inch Series)
通用螺母:机械螺丝用螺母、六角螺母、四角螺母、六角法兰螺母、联
接螺母(英制系列)
ASME B18.2.3.7M Metric Heavy Hex Structural Bolts
米制重六角形结构螺栓
ASME B18.2.4.6M Metric Heavy Hex Nuts
米制重型六角螺母
ASME B.30.2 Overhead and Gantry Cranes
桥式及门式起重机
ASME B.30.3 Hammerhead Tower Cranes
锤头塔式起重机
ASME B.30.4 Portal, Tower and Pillar Cranes
门式、塔式和柱式起重机
ASME B.30.5 Mobile and Locomotive Cranes
汽车起重机和机车起重机
ASME B.30.6 Derricks
桅杆起重机
ASME B.30.8 Floating Cranes and Floating Derricks
浮式起重机和浮式桅杆起重机
ASME B.30.14 Side Boom Tractors
侧臂式拖拉机
ASME B.30.16 Overhead Hoists
高架悬挂提升机
ASME B.30.22 Articulating Boom Cranes
活节悬臂起重机
ASME B31.1 Power Piping
动力管道
ASME B31.3 Process Piping
工艺管道
APPENDIX P to B31.3 Alternative Rules for Evaluation Stress Range 附录P至B31.3 评价应力范围的替代原则
APPENDIX S to B31.3 Piping System Analysis Example 附录S至B31.3 管道系统分析实例
ASME B31.4 Piping Transportation System for Liquid Hydrocarbons and other Liquids
液态烃和其他液体管线输送系统 ASME B31.8 Gas Transportation and Distribution Piping System
气体输送和分配管道系统
ASME B36.10 Welded and seamless wrought Steel Pipe
焊接和无缝轧制钢管
ASME B36.10M Welded and Seamless Wrought Steel Pipe
焊接和无缝轧制钢管
ASME B36.19M Stainless Steel Pipe
不锈钢管
ASME B73.1 Specification for Horizontal End Suction Centrifugal Pumps for Chemical
Process (Not applicable for API service)
化学流程用卧式轴向吸入离心泵技术规范(不适用于API服务)
ASME PTC 10 Performance Test Code on Compressors and Exhausters
压缩机和排气动力试验规程
ASME PTC 19.3 Part 3 – Temperature Measurement Instruments and Apparatus
第3部分—温度测量仪器及器具 ASME PTC 2 Definitions and Values Performance Test Codes
定义和数值性能试验规程
ASME PTC 22 Performance Test Code on Gas Turbines
燃气轮机性能试验规程
ASME PTC 4 Performance Test code for Fired Steam Generators
燃煤蒸汽发生器性能试验规程
ASME PTC 6 Performance Test Code on Steam Turbines
汽轮机性能试验规程
ASME Section I Rules for Construction of Power Boilers ASME第1节 动力锅炉施工规则
ASME Section II Materials
ASME第2节 材料
ASME Section IX Welding and Brazing Qualifications ASME第9节 焊接和钎焊条件
ASME Section V Non Destructive Examinations ASME第5节 无损检查
ASME Section VIII Div.1 Rules for Construction of Pressure Vessels ASME第8节第1小节 压力容器施工规则
ASME Section VIII Div.2 Rules for Construction of Pressure Vessels (alternative) ASME第8节第2小节 压力容器施工规则(替代) ASME STS 1 Steel Stacks
钢制竖管
thTEMA 9 Edition Standards of the Tubular Exchanger Manufacturers Association
TEMA第9版 管式换热器制造商协会标准 ASNT - American Society for Nondestructive Testing (NDT) ASNT-美国无损检测(NDT)学会
Qualification and Certification of Nondestructive Testing Personnel ASNT CP189 无损检测人员技术资格鉴定 ASSE – American Society of Safety Engineers
ASSE-美国安全工程师学会
A10.4 Safety Requirements
安全要求
ASTM - American Society for Testing and Materials
ASTM-美国试验材料学会
Vol 01.01 Steel-Piping, Tubing, Fittings 01.01卷 钢管、管材、管件
Vol 01.02 Ferrous Castings; Ferroalloys 01.02卷 有色金属铸件;铁合金
Vol 01.03 Steel-Plate, Sheet, Strip, Wire; Stainless Steel Bar 01.03卷 钢板、薄板、长片、线材;不锈钢条棒 Vol 01.04 Steel-Structural, Reinforcing, Pressure Vessel, Railway 01.04卷 钢结构、钢筋、压力容器、铁路 Vol 01.05 Steel-Bars, Forgings, Bearing, Chain, Tool 01.05卷 钢筋、锻件、轴承、链条、工具 Vol 01.06 Coated Steel Products
01.06卷 镀层钢板产品
Vol 02.01 Copper and Copper Alloys 02.01卷 铜和铜合金
Vol 02.02 Aluminum and Magnesium Alloys
02.02卷 铝和镁合金
Vol 02.04 Nonferrous Metals--Nickel, Cobalt, Lead, Tin, Zinc, Cadmium, Precious,
02.04卷 Reactive, Refractory Metals and Alloys; Materials for Thermostats, Electrical
Heating and Resistance Contacts, and Connectors
有色金属—镍、钴、铅、锌、镉、精致活性难溶金属和合金;温控器、
电热和电阻触点材料、连接器
Vol 02.05 Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products 02.05卷 金属和无机涂料;金属粉末和金属粉末产品
Vol.03.01 Metals - Mechanical Testing; Elevated and Low-Temperature Tests;
03.01卷 Metallography
金属—机械测试;高温和低温试验;金相
Vol 04.01 Cement; Lime; Gypsum
04.01卷 水泥;石灰;石膏
Vol 04.02 Concrete and Aggregates
04.02卷 混凝土和骨料
Vol 04.03 Road and Paving Materials
04.03卷 道路及铺路材料
Vol 04.04 Roofing and Waterproofing
04.04卷 屋面和防水
Vol 04.05 Chemical-Resistant Nonmetallic Materials; Vitrified Clay Pipe; Concrete
04.05卷 Pipe; Fiber-Reinforced Cement Products; Mortars and Grouts; Masonry;
Precast Concrete
耐化学腐蚀的非金属材料;陶管;混凝土管;纤维增强水泥制品;灰浆
和灌浆;砌筑;预制混凝土
Vol 04.06 Thermal Insulation; Environmental Acoustics
04.06卷 隔热;环境声学
Vol 04.07 Building Seals and Sealants; Fire Standards; Dimension Stone 04.07卷 建筑密封和密封剂;消防标准;块石
Vol 04.08 Soil and Rock (I): D 420 - D 5611
04.08卷 土壤和岩石(I): D 420 - D 5611
Vol 04.09 Soil and Rock (II): D 5714 - latest
04.09卷 土壤和岩石(II): D 5714—最新
Vol 04.10 Wood
04.10卷 木材
Vol 04.11 Building Constructions (I): E 72 - E 1670
04.11卷 建筑结构(I): E 72 - E 1670
Vol 04.12 Building Constructions (II): E 1671 - latest; Property Management Systems;
04.12卷 Technology and Underground Utilities
建筑结构(II): E 1671—最新;资产管理系统;技术和地下公用设施 Vol 04.13 Geosynthetics
04.13卷 土工合成
Section 5 of ASTM ―Petroleum Products, Lubricants and fossil fuels‖
ASTM第5节 GENERAL REMARK:
All the section 5 of ASTM will be used as reference only. Process Job Design
Specifications and Licensors requirements will prevail in case of conflict (e.g.
specifications of products, etc).
―石油产品、润滑剂和化石燃料‖
一般说明:
ASTM第5节所有内容仅作为参考。如有冲突(如产品规格等),以工艺
工作设计规范和协议要求为准。
Vol 05.01 Petroleum Products and Lubricants (I) D56 - D3710
05.01卷 石油产品和润滑剂(I) D56 - D3710
Vol 05.02 Petroleum Products and Lubricants (II)
05.02卷 石油产品和润滑剂(II)
Vol 05.03 Petroleum Products and Lubricants (III)
05.03卷 石油产品和润滑剂(III)
Vol 05.04 Petroleum Products, Lubricants and Fossil Fuels: Petroleum Products and
05.04卷 Lubricants (IV)
石油产品、润滑剂和化石燃料:石油产品和润滑剂(IV) Vol 05.05 Petroleum Products, Lubricants, and Fossil Fuels: Combustion
05.05卷 Characteristics; Manufactured Carbon and Graphite Products; Catalysts
石油产品、润滑剂和化石燃料:燃烧特性;人造碳和石墨产品;催化剂 Vol 05.06 Petroleum Products, Lubricants, and Fossil - Gaseous Fuels; Coal and Coke 05.06卷 石油产品、润滑剂和化石燃料:煤和焦炭
Vol 06.01 Paint -- Tests for Chemical, Physical, and Optical Properties; Appearance 06.01卷 油漆—化学、物理和光学性能测试;外观
Vol 06.02 Paint -- Products and Applications; Protective Coatings; Pipeline Coatings 06.02卷 油漆—产品及应用;防护涂料;管道涂料
Vol 06.03 Paint -- Pigments, Drying Oils, Polymers, Resins, Naval Stores, Cellulosic
06.03卷 Esters, and Ink Vehicles
油漆—颜料、干燥油、聚合物、树脂、松脂、纤维素酯、油墨连接料 Vol 06.04 Paint -- Solvents; Aromatic Hydrocarbons
06.04卷 油漆—溶剂;芳香烃
Vol 08-01 Plastics (I): D256 - D3159
08-01卷 塑料(I): D256 - D3159
Vol 08-02 Plastics (II): D3222 - D5083
08-02卷 塑料(II): D3222 - D5083
Vol 08-03 Plastics (III): D5117 - latest; Reinforced Plastic Piping Systems and Chemical
08-03卷 Equipment; Plastic Building Products
塑料(III): D5117—最新;纤维增强塑料管道系统和化工设备;塑料建材
产品
Vol 08-04 Plastic Piping Systems
08-04卷 塑料管道系统
Vol 09.01 Rubber, Natural and Synthetic -- General Test Methods; Carbon Black 09.01卷 天然橡胶和合成橡胶—通用试验方法;炭黑 Vol.09.02 Rubber Products, Industrial - Specifications and Related Test Methods;
09.02卷 Gaskets; Tires
工业橡胶制品—规范和相关测试方法;垫片;轮胎 Vol 11.01 Water (I)
11.01卷 水(I)
Vol 11.02 Water (II)
11.02卷 水(II)
Vol 15.01 Refractories, Activated Carbon; Advanced Ceramics 15.01卷 耐火材料、活性炭;高级陶瓷
Vol 15.06 Adhesives
15.06卷 粘合剂
AWS -American Welding Society
AWS-美国焊接学会
A2.4 Standard Symbols for Welding, Brazing, and Nondestructive Examination
焊接、钎焊及无损检测的标准符号 D1.1 Structural welding Code
结构焊接规范
D1.5 Bridge welding Code
桥接焊规范
D1.6 Structural welding Code – Stainless Steel
结构焊接规范—不锈钢
AWWA - American Water Works Association
AWWA-美国自来水厂协会
C-200 Steel Water Pipe - 6 in. (150 mm) and Larger
钢制水管—6英寸(150mm)及更大
C-213 Standard for Fusion-Bonded Epoxy Coating for the Interior and Exterior of
Steel Water Pipelines.
钢制输水管道内部及外部熔接环氧涂层标准
CEMA standards
CEMA标准
ANSI-CEMA 102-2006 Conveyor Terms & Definitions
输送机术语和定义
ANSI-CEMA 402-2003 Belt Conveyors
带式输送机
CFR - Code of Federal Regulation
CFR-联邦法规汇编
1910.119 Process Safety Management of Highly Hazardous Chemicals
高度危险化学物质过程
EAU - Committee for Waterfront Structures, Harbours and Waterways
EAU-海岸建筑物、港口和航道委员会
EAU 2004 Recommendations of the Committee for Waterfront Structures Harbours and
thWaterways, 8 Edition, Issued by the Committee for Waterfront Structures
Harbours and Waterways and the German Society for Soil Mechanics and
Foundation Engineering
海岸建筑物、港口和航道委员会建议,第8版,由海岸建筑物、港口和
航道委员会及德国土壤力学与基础工程学会发行
EEMUA - Engineering Equipment and Material Users Association
EEMUA-英国工程设备和材料用户协会
EEMUA 140 Noise procedure specification
噪音过程说明
EEMUA 141 Guide to the use of EEMUA 140
EEMUA 140使用指南
EEMUA 144 90-10 Copper Nickel Alloy Piping for Offshore Applications : Tubes -
Seamless & Welded
90-10海上应用的铜镍合金管路:管—无缝焊接
EEMUA 145 90/10 Copper Nickel Alloy Piping for Offshore Applications - Specification:
Flanges Composite and Solid
90-10海上应用的铜镍合金管路:规范—法兰混合材料和固体 EEMUA 146 90/10 Copper Nickel Alloy Piping for Offshore Applications - Specification:
Fittings
90-10海上应用的铜镍合金管路:规范—管件
Publication No. 189 Guide to Fieldbus Application for the Process Industry, 1997 出版号189 加工工业现场总线应用指南,1997
FieldBus Foundation
现场总线基础
AG-140 Wiring and Installation 31.25kbit/s, Voltage Mode, Wire Medium
31.25kbit/s布线和安装,电压模式,电线媒介 AG-163 31.25kbit/s Intrinsically Safe Systems
31.25kbit/s本质安全系统
AG-165 Fieldbus Installation & Planning Guide
现场总线安装及规划指南
FD-043 Foundation Field bus Technical Overview
基金会现场总线技术概述
IAEA - International Atomic Energy Agency
IAEA-国际原子能机构
IAEA Safety Series N?115 (1996 International Basic Safety standards for Protection against Ionizing Radiation
Edition) and for the Safety of Radiation Sources. IAEA安全系列N?115(1996版) 国际电离辐射防护和辐射源安全基本安全标准 IAEA Safety Standard series N? Regulation for the safe Transport of Radioactive Material. Ts-R-1 (2005 Edition) 放射性物质安全运输规则
IAEA安全系列N? Ts-R-1(2005
版)
ICRP - International Commission of Radiological Protection
ICRP-国际辐射防护委员会
ICRP Publication N?103, 2007 Recommendations of the International Commission on Radiological
ICRP出版物N?103, 2007 Protection.
国际辐射防护委员会建议
IEC (International Electro Technical Commission)
IEC(国际电工技术委员会)
IEC 60034 Rotating electrical machines
旋转电机
IEC 60038 Standard voltages
标准电压
IEC 60050 International electrotechnical vocabulary
国际电工词汇
IEC 60051 Direct acting indicating analogue electrical measuring instruments and their
accessories
直接作用模拟指示电测量仪表及其附件 IEC 60060 Guide on high-voltage testing techniques
高压试验技术指南
IEC 60071 Insulation co-ordination
绝缘配合
IEC 60072 Dimensions and output series for rotating electrical machines
旋转电机尺寸和输出系列
IEC 60073 Basic and safety principles for man-machine
interface, marking and identification
人-机接口,标记和鉴别用的基本原理和安全原则 IEC 60076 Power transformers
电力变压器
IEC 60079-0 to 19 Electrical apparatus for explosive gas atmospheres IEC 60079-0至19 爆炸性气体环境用电气设备
IEC 60085 Electrical insulation – Thermal evaluation and designation
电绝缘—耐热性评定和命名
IEC 60146 Semiconductors converters-General requirements and line commutated
converters
半导体变流器.总要求和线路整流转换器 IEC 60183 Guide to selection of HV cables
高压电缆的选择指南
IEC 60214 Tap changers
抽头切换开关
IEC 60225 Octave, Half-Octave and third octave band filters intended for the analysis of
sounds and vibrations
声和振动分析用倍频程、1/2倍频程和1/3倍频程滤波器 IEC 60227 Polyvinyl chloride cables of rated voltages up to including 450/750V
额定电压450/750V及以下聚氯乙稀绝缘电缆 IEC 60228 Conductor of insulated cables
绝缘电缆的导体
IEC 60255 Electrical relays
电气继电器
Classification of Degrees of Protection Provided by Enclosure IEC 60529 外壳防护等级分类
IEC 60265 High voltage switches for rated voltages above 1kV and less than 52kV
额定电压1KV以上至52KV以下高压开关 IEC 60269 Cartridge fuses for voltages up to and including 1000V a.c. and 1500V d.c.
1000V交流电压/ 1500V直流电压及以下熔丝管 IEC 60270 High-Voltage Test Techniques - Partial Discharge Measurements
高压测试技术—局部放电测量
IEC 60282 Fuses for voltages exceeding 1000V a.c.
交流电压1000V以上熔断器
IEC 60287 Electric cables - Calculation of the current rating and calculation of losses
电缆—电流额定计算及损失计算
IEC 60289 Reactors
电抗器
IEC 60298 Specification for a.c. metal enclosed switchgear and controlgear for rated
voltages over 1 kV and up to and including 52 kV
额定电压1KV以上及52KV(含)交流金属外壳开关设备和控制设备 IEC 60304 Standard colours for insulation for
low-frequency cables and wires
低频电缆和电线用绝缘的标准颜色
IEC 60331 Fire Resisting Characteristics of Electric Cables
电缆耐火特性
IEC 60332 Flame Retardant Characteristics of Electric Cables
电缆阻燃特性
IEC 60332-1 Tests on Electrical Cables under Fire Conditions
火灾环境下的电缆试验
IEC 60332-2 Test on electric and optical fiber cables under fire conditions
火灾环境下的电缆和光缆试验
IEC 60332-3 Tests on Electrical Cables under Fire Conditions
火灾环境下的电缆试验
IEC 60364 Electrical installation of buildings (up to 1 kV)
建筑物的电气设施(1kV以下)
IEC 60376 Specification of technical grade sulfur hexafluoride (SF6) for use in electrical
equipment
电气设备用工业级六氟化硫(SF6)规范
IEC 60408 Low-voltage air-break switches, air-break disconnectors, air-break
switch-disconnectors and fuse-combination units
低压空气断路开关,空气断路切断器,空气断路开关切断器及熔断器组
合电器
IEC 60417 Labels
标签
IEC 60427 High-voltage alternating current circuit breakers
高压交流断路器
IEC 60439 Low voltage switchgear and controlgear assemblies
低压成套开关设备和控制设备
Basic and safety principles for man-machine interface, marking and
identification – Identification of equipment terminals and of terminations of
certain designated conductors, including general rules for an alphanumeric IEC 60445 system.
人机界面,标志和识别用基本守则和安全守则—电器端子和用相应符号标
志的接线端子的识别方法(包括字母数字标志识别通则)
IEC 60446 Basic and safety principles for man-machine
interface, marking and identification
人机界面,标志和识别用基本守则和安全守则
IEC 60470 HV a.c. contactors and contactor based motor starters
高压交流接触器及接触器为基础的电动机起动器
IEC 60478 Stabilized power supplies, d.c
直流输出的稳定电源
IEC 60479 Guide to effects of current on human beings and livestock
通过人体和牲畜的电流效应指南
IEC 60502 Power cables with extruded insulation and their accessories for rated voltage
from 1 kV (U=1.2 kV) up to 30 kV (U=36 kV) mm
额定电压1kV(Um=1.2kV)到30kV(Um=36kV)挤包绝缘电力电缆及附件 IEC 60529 Classification of Degrees of Protection Provided by Enclosure
外壳防护等级分类
IEC 60617 Graphical symbols for diagrams
电气简图用图形符号
IEC 60622 Secondary cells and batteries containing alkaline or other non-acid
electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells
含碱性或其它非酸性电解液的蓄电池和蓄电池组—棱形可充电的密封式
镍镉单体电池
IEC 60623 Vented nickel-cadmium prismatic rechargeable single cells
通风式可再充电的棱形镍镉单体电池
IEC 60695-4 Fire Hazard Testing – Part 4: Terminology Concerning Fire Test
着火危险试验 第4部分:着火试验术语
IEC 60754-2 Test on gases involved during combustion of electric cables- Part 2:
Determination of degree of acidity of gases evolved during the combustion of
materials taken from electric cables by measuring pH and conductivity
电缆燃烧时释出气体的试验 第2部分:用测量pH值和电导率来测定取
自电缆的材料燃烧时释出气体的酸度
IEC 60754-2-Am1 Amendment 1 - Test on gases involved during combustion of electric cables- IEC 60754-2-修正件1 Part 2: Determination of degree of acidity of gases evolved during the
combustion of materials taken from electric cables by measuring pH and
conductivity
修正件1—电缆燃烧时释出气体的试验 第2部分:用测量pH值和电导
率来测定取自电缆的材料燃烧时释出气体的酸度
IEC 60793 Optical fibres
光学纤维
IEC 60794 Optical fibre cables
光纤电缆
IEC 60801 Electromagnetic Compatibility for Industrial Process Measurement and
Control Equipment
工业过程测量和控制设备的电磁兼容性
IEC 60811 Common test methods for insulating and sheathing materials of electric cables
电缆的绝缘和护套材料一般性测试方法
IEC 60815 Selection and dimensioning of high-voltage insulators intended for use in
polluted conditions
污染环境中所用高压绝缘子的选择和尺寸测定
IEC 60840 Power cables with extruded insulation and their accessories for rated voltages
above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) – Test methods and
requirements
额定电压30 kV (Um = 36 kV)到150 kV (Um = 170 kV)挤包绝缘电力电缆
及附件—试验方法与要求
IEC 60870 Telecontrol equipment and systems
远动设备及系统
Electrical test methods for electric cables. IEC 60885 电缆的电气试验方法
Loading guide for dry-type power transformers IEC 60905 干式电力变压器负载指南
IEC 60909 Short circuit current calculations in three phase AC Systems
三相交流系统中的短路电流计算
IEC 6092.3 Cables (construction, testing and installation)
电缆(施工、测试及安装)
IEC 60942 Standard for Sound Level Calibrators
声校准器标准
IEC 60947 Specification for low voltage switchgear and controlgear
低压开关柜和控制柜规范
IEC 61000 Electromagnetic Compatibility for Industrial Process Measurement and
Control Equipment
工业过程测量和控制设备电磁兼容性
IEC 61024 Protection of structures against lightning
建筑物的雷电保护
IEC 61034-1 Measurement of smoke density of cables burning under defined conditions –
part 1: test apparatus
在规定条件下燃烧的电缆烟雾密度测量.第1部分:试验仪器 IEC 61034-1 Measurement of smoke density of cables burning under defined conditions –
part 2: test procedure and requirements
在规定条件下燃烧的电缆烟雾密度测量.第2部分:试验步骤和要求 IEC 61070 Compliance test procedures for steady-state availability
稳态可用性性能审核试验程序
IEC 61123 Reliability testing
可靠性试验
IEC 61131 Programmable Logic Controllers – Parts 2 and 3
可编程逻辑控制器—第2部分与第3部分
IEC 61136-1 Semiconductor Power Convertors - Adjustable Speed Electric Drive Systems
- General Requirements Part 1: Rating Specifications, Particularly for D.C.
Motor Drives
半导体电力变流器.可调速电气传动系统.一般要求.第1部分:特别是对直
流电动机传动的定额规范
IEC 61140 Protection against electric shocks- common aspects for installation and
equipment
电击防护设备.装置和设备的通用方位
IEC 61158-2 Fieldbus Standard for use in Industrial Control System (ISA S50.20)
Part 2 – Physical Layer Specification and Service Definition
工业控制系统用现场总线(ISA S50.20)第2部分:物理层规范和服务定义 IEC 61158-3 Fieldbus Standard for use in Industrial Control System
Part 3 – Data Link Service Definition
工业控制系统用现场总线.第3部分:数据链路服务定义 IEC 61158-4 Fieldbus Standard for use in Industrial Control System
Part 4 – Data Link Protocol Specification
工业控制系统用现场总线.第4部分:数据链路协议规范 IEC 61158-5 Fieldbus Standard for use in Industrial Control System
Part 5 – Application Layer Service Definition
工业控制系统用现场总线.第5部分:应用层服务定义
IEC 61158-6 Fieldbus Standard for use in Industrial Control System
Part 6 – Application Layer Protocol Specification
工业控制系统用现场总线.第6部分:应用层服务规范 IEC 61241 Electrical apparatus for use in the presence of combustible dust
用于可燃性粉尘场所的电器设备
IEC 61312 Protection against Lightning Electromagnetic Impulse
雷电电磁脉冲的防护
IEC 61508 Functional Safety of E/E/PE Safety-related Systems.
电气/电子/可编程电子安全系统的功能安全
IEC 61511 Functional safety – Safety instrumented systems for the process industry
sector
功能安全.加工工业部门用安全仪表化系统
Safety of power transformers, power supplies, reactors and similar products. IEC 61558 电力变压器、电源装置及类似设备的安全
IEC 61639 Direct connection between Power Transformers and Gas Insulated Metal
Enclosed Switchgear for rated voltage of 72.5 kV and above
额定电压72.5 kV及以上气体绝缘金属封闭开关设备与电力变压器之间
的直接连接
IEC 61643-1 Surge Protective Devices Connected to Low Voltage Power Distribution
System
Part 1 – Performance Requirements and Testing Methods
连接到低压配电系统的浪涌保护装置.第1部分:性能要求和试验方法 IEC 61643-21 Surge Protective Devices Connected to Low Voltage Power Distribution
System
Part 21 – Surge Protective Devices Connected to Telecommunication and
Signalling Networks – Performance Requirements and Testing Method
连接到低压配电系统的浪涌保护装置.第21部分: 接到电信和信号传输网
络的电涌保护装置.性能要求和测试方法
IEC 61672 Sound Level Meters – Part 1 & 2
声级计.第1部分与第2部分
IEC 61850 Communication Networks and Systems in Substations
变电站通信网络和系统
IEC 62040 Uninterruptible Power Systems (UPS)
不间断电源系统(UPS)
IEC 62271 High Voltage switchgear and controlgear
高压开关设备和控制设备
IEC 62305 Code of practice for protection of structures against lightning
建筑物的雷电防护实施规程
IEC 651 Recommendations for sound level meters
声级计建议
IEC 942 Recommendations for sound calibrators
声校准器建议
IEEE - Institute of Electrical and Electronics Engineers
IEEE-电气与电子工程师协会
IEEE 1100 Recommended Practice for Powering & Grounding Electronic Equipment –
IEEE Emerald Book
电子设备供电和接地推荐操作规程—IEEE翡翠色书 IEEE 1451.1 Standard for a Smart Transducer Interface for Sensors and Actuators –
Network Capable Application Processor Information Model
传感器和驱动器传感界面标准.网络能力应用处理器信息模型 IEEE 802.3 Standard for Information Technology – Telecommunications and Information
Exchange between Systems – Local and Metropolitan Area Networks Specific
Requirements
Part 3 – Carrier Sense Multiple Access with Collision Detection (CSMA/CD)
Access Method and Physical Layer Specifications
信息技术标准.系统间电信和信息交换.局域网和城域网的特定要求
第3部分:带碰撞检测的载波侦听多址访问(CSMA/CD)的访问方法和物
理层规范
IEEE 802.4 Token bus
令牌总线
IEEE STD 518 Guide for Installation of Electrical Equipment to Minimize Electrical Noise
Inputs to Controllers from External Sources.
减小来自外部源的电噪声输入到控制器的电气设备的安装指南 IGE - INSTITUTION OF GAS ENGINEERS
IGE-煤气工程师学会
Steel Pipeline for High Pressure Gas Transmission IGE TD 1 高压输气钢制管道
IMO - SOLAS – INTERNATIONAL MARITIME ORGANISATION
IMO - SOLAS –国际海事组织
SOLAS 74/78/81/83 International Conventions for the safety of life at sea
国际海上安全公约
International Council of Building Officials
国际建筑官员委员会
UBC Uniform Building Code
统一建筑规范
International Code Council
国际规范协会
IBC International Building Code 2006
国际建筑规范2006
IFC International Fire Code 2006
国际防火规范2006
International Telecommunication Union
国际电信联盟
ITU-T G.652 Characteristics of Single-Mode Optical Fiber and Cables
单模光纤和光缆的特性
ITU-T G.653 Characteristics of Single-Mode Optical Fiber Cables with Displaced
Dispersion
色散位移单模光纤和光缆的特性
ITU-T G.654 Characteristics of Single-Mode Optical Fiber Cables with Displaced Section
截止波长位移单模光纤和光缆的特性
ITU-T G.655 Characteristics of Single-Mode Optical Fiber Cables with Non-Null
Displaced Dispersion
非零色散单模光缆特性
ITU-T G.656 Characteristics of Non-Null Dispersion Single-Fiber Single-Cable for Optical
Wide Band Transport
宽带光传输的非零色散光纤电缆的特性
ITU-T G.661 Definition and Test Methods for the Relevant Generic Parameters of Optical
Amplifying Devices and Subsystems
光纤放大器及其子系统有关一般参数的定义和测试方法 ITU-T G.662 Generic Characteristics of Optical Amplifying Devices and Subsystems
光纤放大器及其子系统的一般特性
ITU-T G.664 Optical Safety Procedures and Requirements for Optical Transport Systems
光传送系统的光安全程序和要求
ITU-T G.671 Transmission Characteristics of Optical Components and Subsystems
光组件和子系统的传输特性
ITU-T L.3 Armouring of Cables
电缆的铠装
ITU-T L.10 Optical Fiber Cables for Duct, Tunnel, Aerial and Buried Application
管道、隧道、架空和直埋用的光缆
ITU-T L.12 Optical Fiber Joints
光纤接头
ITU-T L.13 Sheath Joints and Organizers of Optical Fiber Cables in the Outside Plant
场外光纤电缆护套接头和组织体
ITU-T L.14 Measurement Method to Determine the Tensile Performance of Optical Fiber
Cables Under Load
负载过轻时确定光纤电缆拉伸性能的测量方法 ITU-T L.25 Optical Fiber Cable Network Maintenance
光纤电缆网络维护
ITU-T L.31 Optical Fiber Attenuators
光纤衰耗器
ITU-T L.36 Single Mode Optical Fiber Connectors
单模光纤连接器
ISA – International Society of Automation
ISA-国际自动化协会
ISA 50.02 Fieldbus Standard for Use in Industrial Control Systems
Part 2 – Physical Layer Specification and Service Definition
Part 3 – Data Link Service Definition
Part 4 – Data Link Protocol Specification
Part 5 – Application Layer Service Definition
Part 6 – Application Layer Protocol Specification
工业控制系统用现场总线标准
第2部分:物理层规范和服务定义
第3部分:数据链路服务定义
第4部分:数据链路服务规范
第5部分:应用层服务定义
第6部分:应用层协议规范
ISA 71 Environmental Conditions for Process Measurement and Control Systems
过程检测和控制系统的环境条件
ISA S5.1 Instrumentation Symbols and Identification
仪表符号和说明
ISA TR50.02 Fieldbus Standard for Use in Industrial Control Systems
Part 3 & 4 – Technical for Fieldbus Data Link Layer-Tutorial, Part 9 – User
Layer Technical Report
工业控制系统用现场总线标准
第3部分&第4部分:现场总线数据链路层技术.指南
第9部分:用户层技术报告
S-5.1 Instrument Symbols and Identification
仪表符号和说明
S-5.2 Binary Logic Diagrams for Process Operation
用于过程操作的二进制逻辑图
S-5.3 Graphic Symbols for Distributed Control/Shared Display Instrumentation,
Logic and Computer Systems.
用于分布式控制的图形符号/共享显示仪表、逻辑和计算机系统 S-5.4 Instrument Loop Drawing
仪表回路图
S-5.5 Graphic Symbols for DCS Display
用于分布式控制系统显示的图形符号
S-75.01 Valve Cv Calculation. Flow Equation for Control Valves Sizing.
阀门流量计算.尺寸控制阀用流量方程式
SP-18.1 Annunciator Sequences and Specifications;
指示器序列和规范
ISO - International Organization for Standardization
ISO-国际标准组织
10816 Evaluation of machine vibration by measurements on non-rotating parts
对非旋转部件进行测量以评定机械振动
11064 Ergonomic Design of Control Centers
控制中心的人类工效学设计
1940/1 Mechanical vibration – Balance quality requirements of rigid rotors
机械振动——刚性转子平衡品质的要求
Radiation Protection- Sealed radioactive sources- General Requirements and
2919 classification
辐射防护 密封射线源一般要求和分类
Design & Procurement of Gas Turbine System 3977 燃气轮机系统设计与采购
Radiation protection- Apparatus for industrial gamma radiography. Part 1 3999-1 Specifications for performance, design and tests
射线防护--工业伽马射线装置.第1部分:性能,设计和试验规范 5149 Mechanical Refrigerating Systems Used for Cooling and Heating - Safety
Requirements
制冷和加热用机械制冷系统 安全要求
Technical specifications for centrifugal pumps - Class II (Not applicable for
5199 API service)
离心泵技术规范-II类(不适用于API服务)
Industries Valves – Pressure testing of Valves 5208 工业用阀门 金属阀门的压力试验
5210 Multiturn Valve Actuator Assembly
多圈旋转阀门驱动器附件
5211 Part-turn Valve Actuator Assembly
部分回转阀门驱动器附件
5351 Steel Ball Valves for Petroleum, Petrochemical and Allied Industries
石油、石化及相关工业用钢制球阀
6385 Ergonomic principles in the design of work systems
设计工作系统的人类工效学原理
Radionuclide gauges- Gauges designed for permanent installation 7205 放射性核检验仪.为固定装置设计的检验仪
Physical Characteristic for Card 7810 卡的物理特性
Physical Characteristic for Card 7816 卡的物理特性
Coating Powders – Part 6: Determination of Gel Time of Thermosetting
8130 Coating Powders at a given Temperature
涂覆用粉.第6部分:在给定温度下热固涂覆用粉热凝时间测定 8501 Preparation of steel substrates before application of paints and related
products – Visual assessment of surface cleanliness
涂装油漆和有关产品前钢材预处理.表面清洁度的视觉评价 8995 Lighting of indoor work places
室内工作场所的照明
9908 Technical specifications for centrifugal pump - Class III (Not applicable for
API service)
离心泵技术规范-III类(不适用于API服务)
Radiation protection - Sealed radioactive sources- leakage test methods 9978 辐射防护.密封放射源.泄漏检验方法
Specifications for Non-Metallic Blast-Cleaning Abrasives 11126 非金属喷砂清理磨料规范
TS 11602 Part 1 Fire protection — Portable and wheeled fire extinguishers — Part 1: Selection TS 11602第1部分 and installation
防火.便携式与推车式灭火器.第1部分:选择和安装
TS \11602 Part 2 Fire protection — Portable and wheeled fire extinguishers — Part 2: TS 11602第2部分 Inspection and maintenance
防火.便携式与推车式灭火器.第2部分:检查和维修
12944-1 Paints and varnishes – Corrosion protection of steel structures by protective
paint systems – Part 1: General Introduction
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第1部分:一般性介绍
12944-2 Paints and varnishes – Corrosion protection of steel structures by protective
paint systems – Part 2: Classifications of environments
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第2部分: 环境分类
12944-3 Paints and varnishes – Corrosion protection of steel structures by protective
paint systems – Part 3: Design and constructive requirements
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第3部分:设计要求和建设
要求
12944-4 Paints and varnishes – Corrosion protection of steel structures by protective
paint systems – Part 4: Surface types and preparation
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第4部分:表面类型和表面
准备
12944-5 Paints and varnishes – Corrosion protection of steel structures by protective
paint systems – Part 5: Protective paint systems
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第5部分:防护漆系统
12944-7 Paints and varnishes – Corrosion protection of steel structures by protective
paint systems – Part 7: Execution and supervision of painting work
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第7部分:涂漆工艺的实施
和管理
14001:2004 Environmental Management System
环境管理体系
Cathodic protection of pipelines transportation system - On-land pipelines
15589 (part 1).
管道传输系统阴极保护-第1部分:陆上管道
8473 Information Technology – Protocol for providing the Connectionless – Mode
Network Service
信息技术.提供无连接方式网络服务的协议.连接式网络服务
8503-1 to 4 Preparation of steel substrates before application of paints and related
8503-1至4 products – Surface roughness characteristics of blast -cleaned surfaces
涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性
8802 Information Technology – Telecommunications and Information – Exchange
between Systems – Local and Metropolitan Area Networks – Specific
Requirements
信息技术.系统间远程通信和信息交换.局域网和城域网.特定要求
Quality Systems Model for quality assurance in design, development, 9001 production, installation and service
质量体系--设计、开发、生产、安装和服务的质量保证模式
Non-Destructive Testing – Qualification and Certification of Personnel 9712 无损检测.人员的资格鉴定与认证
5167 Measurement of Fluid Flow by Orifice Plates, Nozzles and Venturi Tubes
inserted in circular cross section conduits running full.
流量测量节流装置用孔板、喷嘴和文丘里管测量充满圆管的流体流量 ISO/IEC 17050 Part 1 Conformity assessment Supplier?s declaration of conformity Part 1: General
ISO/IEC 17050第1部分 requirements
合格评定.供应商的合格声明.第1部分:一般要求 ISO/IEC 17050 Part 2 Conformity assessment Supplier's declaration of conformity Part 2:
ISO/IEC 17050第2部分 Supporting documentation
合格评定.供应商的合格声明.第2部分:辅助文档 TC67/SC2 Pipeline transportation systems for the petroleum and natural gas industries
石油、天然气工业的管道输送系统
MSS - Manufacturer’s Standardization Society
MSS-制造商标准化协会
MSS SP58 Pipe Hangers and Supports - Materials, Design and Manufacture
管道支吊架 - 材料、设计和制造
MSS SP69 Pipe Hangers and Support - Selection and Application
管道支吊架 – 选择和应用
MSS SP89 Pipe Hangers and Supports - Fabrication and Installation Practice
管道支吊架 – 制造和安装规程
Standard Finishes for Contact Faces of Pipe Flanges and Connecting End
MSS SP 6 Flanges of Valves and Fittings
管法兰以及阀门和管件端法兰的接触面标准精度
SP 25 Standard Marking System for Valves, Fittings, Flanges & Unions
阀门、管件、法兰和管接头的标准标记系统
SP 44 Steel Piping Flanges
钢制管道法兰
SP 45 By-Pass and Drain Connection Standard
旁通和排放连接标准
SP 53 Quality Standard for Steel Casting and Forgings for Valves, Fittings and Other
Piping Components – Magnetic Particle Examination Method
阀门、法兰、管件和其他管道部件用铸钢件和锻钢件质量标准-磁粉检验
方法
SP 55 Quality Standard for Steel Casting and for Valves, Flanges, Fittings and Other
Piping Components – Visual Method for Evaluation of Surface Irregularities
阀门、法兰、管件和其他管道部件用铸钢件质量质量标准-表面缺陷评定
的目视检验方法
SP 70 Cast Iron Gate Valves Flanged and Threaded Ends
法兰端和螺纹端灰铸铁闸阀
SP 75 Specification for High Test Wrought Butt Welding Fittings
优质钢制对焊管件规范
SP 80 Bronza Gate, Globe, Angle, and Check Valves
青铜闸阀、截止阀、角阀和止回阀
SP 97 Integrally Reinforced Forged Branch Outlet Fittings
整体加强锻制分支引出端管件
SP 128 Ductile Iron Gate Valves
球磨铸铁闸阀
NACE - National Association of Corrosion Engineers
NACE-美国腐蚀工程师协会
MR 0175 / ISO 15156 Petroleum and Natural Gas Industries - Materials for Use in H2S-containing
Environments in Oil and Gas Production
石油天然气工业.油气生产中含硫化氢环境中使用的材料
MR 0103-2010 Material Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining
Environments.
腐蚀性炼油环境中耐硫化物应力开裂的材料
RP 0169 Corrosion on underground or submerged metallic piping systems
埋地或水下金属管线系统的腐蚀
RP 0170 Protection of Austenitic Stainless Steels and Other Austenitic Alloys from
Polythionic Acid Stress Corrosion Cracking During Shutdown of Refinery
Equipment
炼油厂设备停工期间奥氏体不锈钢和其他奥氏体合金连多硫酸应力腐蚀
开裂的预防
Mitigation of alternating current and lightning effects on metallic structures
RP 0177 and corrosion control systems
减轻交流电和雷电对金属构筑物和腐蚀控制系统的影响
Discontinuity (Holiday) Testing of New Protective Coatings on Conductive
RP 0188 Substrates
导电底材上新涂层的不连续区域(漏涂)的测试
RP 0285 Corrosion control of underground storage tank systems by cathodic protection
利用阴极保护对地下储油罐系统的腐蚀控制
RP 0286 Electrical isolation of cathodically protected pipelines
阴极保护管道的电绝缘
RP 0287 Field Measurement of Surface Profile of brasive Blast–Cleaned Steel Surfaces
sing a Replica Tape
用复制贴膜带测定钢铁喷砂处理后表面轮廓线的现场测定
RP 0391 Materials for the Handling and Storage of Commercial Concentrated (90 to
100%) Sulfuric Acid at Ambient Temperatures
室温下处理、贮存浓硫酸(90%,100%)的材料
RP 0403 Avoiding Caustic Stress Corrosion Cracking of Carbon Steel Refinery
Equipment and Piping
避免碳钢炼油厂设备和管道的烧碱应力腐蚀开裂
RP 0775 Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in
Oilfield Operations
油田生产中腐蚀挂片的准备、安装、分析与解释
Holiday Detection of Fusion-bonded Epoxy External Pipeline Coatings of 250
to 760 microm (10 to 30 mil) SP 0490 250至760 microm(10 to 30 mil)溶结环氧粉末管道熔结环氧粉末外涂层漏
涂点检查
SP 0590 Prevention, Detection and Correction of Deaerator Cracking
排气器开裂的预防、检测与校正
TM0177 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking in
Hydrogen Sulfide (H2S) Environments
硫化氢(H2S)环境下金属抗硫化物应力开裂实验室测试
TM0284 Standard Test Method - Evaluation of Pipeline and Pressure Vessel Steels for
Resistance to Hydrogen-Induced Cracking
管道、压力容器抗氢致开裂钢性能评价的标准试验方法
NEMA
SM-12 Direct Connected Steam Turbine Synchronous Generator Units-Air Cooled
直接连接的汽轮机同步发电机组-气冷式
SM-21 Multistage Steam Turbines for Mechanical Drive Service
用于机械传动设施的多级汽轮机
SM-22 Single Stage Steam Turbines for Mechanical Drive Service
用于机械传动设施的单级汽轮机
SM-23 National Electrical Manufacturers Association
全国电气制造商协会
NFPA - National Fire Protection Association
NFPA-国家防火协会
--- NFPA‘s recalled in the IBC 2009 Code
IBC 2009规范中恢复的NFPA标准
NFPA 101 Life Safety Code
生命安全规范
NFPA 220 Standard on Types of Building Construction
房屋建筑类型标准
NFPA 307 Standard for the Construction and Fire Protection of Marine Terminals, Piers,
and Wharves
码头、桥台和驳船的建造和防火标准
NFPA 10 Standard for Portable Fire Extinguishers
便携式灭火器标准
NFPA 11 Standard for Low-, Medium-, and High-Expansion Foam
低、中、高膨胀泡沫系统标准
NFPA 12 Standard on Carbon Dioxide Extinguishing System
二氧化碳灭火系统标准
NFPA 13 Standard for the Installation of Sprinkler Systems
撒水系统安装标准
NFPA 14 Standard for the Installation of Standpipes and Hose Systems
立管和软管系统安装标准
NFPA 15 Standard for Water Spray Fixed Systems for Fire Protection
防火用喷水固定系统标准
NFPA 20 Standard for the Installation of Stationary Pumps for Fire Protection
消防固定水管的安装标准
NFPA 2001 Standard on Clean Agent Fire Extinguishing System
洁净气体灭火系统标准
NFPA 22 Standard for Water Tanks for Private Fire Protection
专用防火储水罐标准
NFPA 30 Flammable and Combustible Liquids Code
可燃性和易燃性液体规则
NFPA 321 Basic Classification of Flammable and Combustible Liquids
易燃和可燃液体的基本分类
NFPA 58 Liquefied Petroleum Gas Code
液化石油气规范
NFPA 59A Standard for the Production, Storage and Handling of Liquefied Natural Gas
液化天然气生产、储存和装运标准
NFPA 72 National Fire Alarm Code
国家火灾报警规范
NFPA 85 Boiler and Combustion System Hazards Code
锅炉与易燃系统危险性规范
NFPA 86 Standard for Ovens and Furnaces
灶箱和炉标准
NFPA 90A Standard for the Installation of Air-Conditioning and ventilation Systems
空调和通风系统安装标准
NFPA 497 Recommended Practice for the Classification of Flammable Liquids, Gases,
or Vapours and of Hazardous (Classified) Locations for Electrical
Installations in Chemical Process Areas
易燃液体、气体或蒸汽分类和化工生产区中电气装置危险品(经分类)设置
分类推荐实施规程
NFPA 750 Standard on Water Mist Fire Protection Systems
水雾灭火系统标准
NIOSH
NIOSH, Publication N? 90-120 A practical guide to effective hearing conservation programs in the
NIOSH,出版号90-120 workplace.
工作场所中有效的听力保护
实用指南 NIOSH, Publication N? 98-126 Criteria for a Recommended Standard: Occupational Noise Exposure NIOSH,出版号98-126 推荐性标准条件:职业性噪声接触
OCIMF - Oil Companies International Marine Forum
OCIMF-石油公司国际海事论坛
--- Guidelines and Recommendations for the Safe Mooring of Large Ships at
Piers and Sea Islands
大型船舶在码头和海群岛安全系泊的准则和建议 --- Prediction of Wind and Current Loads on VLCCs
巨型游船上风荷载和电流荷载的预测
--- Mooring Equipment Guidelines
系泊设备准则
OIML - International Organization of Legal Metrology
OIML-国际法定计量组织
D 2 Legal units of measurement
法定计量单位
D19 Pattern evaluation and pattern approval
型式评价和型式批准
OSHA - Occupational Safety & Health Administration
OSHA-职业安全和健康署
Part 1904 Recording and Reporting Occupational Injuries and Illness 第1904部分 记录和报告职业伤害和疾病
OSHA, 29CFR 1910.95 General Industry Standard, Occupational Noise Exposure.
通用行业标准,职业性噪声接触
Others
其他
IFC IFC Environmental, Health, and Safety Guidelines for Thermal Power Plants
of 2008
2008年火电厂IFC环境、健康和安全指南 IFC IFC Environmental, Health, and Safety Guidelines for Petroleum Refining of
2007
2007年石油炼制IFC环境、健康和安全指南 IFC IFC Environmental, Health, and Safety General Guidelines of 2007
2007年IFC环境、健康和安全一般原则 ABMA Boiler Water Limits and Achievable Steam Purity for water tube boilers
水管锅炉锅炉用水限额和可实现的蒸汽纯度 ALPEMA Standards of the Brazed Aluminium Plate Fine Exchanger
钎焊铝板细管壳式热换器标准
AMCA Standard 210 Laboratory methods of testing fans for rating AMCA 210标准 风扇额定值的实验测试方法
EJMA Standard of the Expansion Joint Manufacturers Association
膨胀节制造商协会标准
ETSI 300 392_1 RES TETRA V+D General Network Design
RES TETRA V+D一般网络设计
ETSI 300 392_2 RES TETRA V+D Air Interface Specification
RES TETRA V+D空中接口规范
ICAO International Civil Aviation Organization
国际民用航空组织
OHSAS 18001:2007 Occupational Health and Safety Assessment Series
职业健康和安全评估系列
SA 8000 : 2008 Social Accountability
社会责任
PIANC - Permanent International Association of Navigation Congresses PIANC-国际航运会议常设协会
WG24 Criteria for Movements of Moored Ships
系泊船舶的运动标准
WG33 Guidelines for the Design of Fender Systems
防撞系统设计指南
SMACNA – Sheet Metal and Air Conditioning Contractor’s National Association SMACNA – 美国金属散热与空调承包商协会
--- HVAC Duct Construction Standards – Metal and Flexible
HVAC管道建设标准—金属与柔性
SSPC - The Society for Protective Coatings
SSPC – 防护涂料协会
SSPC – VIS 1 Guide and Reference Photographs for Steel Surfaces Prepared by Dry
Abrasive Blast Cleaning
钢结构表面干磨料喷射清理处理指导和参考照片 SSPC – VIS 3 Guide and Reference Photographs for Steel Surfaces Prepared by Power – and
Hand – Tool Cleaning
钢结构表面电动工具和手工具清理处理指导和参考照片 SSPC–PA2 Measurement of Dry Paint Thickness with Magnetic Gages
用磁性测厚仪测量涂层干膜厚度
SSPC–SP 1 Solvent Cleaning
溶剂清理
SSPC–SP 10 Near–White Blast Cleaning (NACE 2)
近白喷砂清理(NACE 2)
SSPC–SP 2 Hand Tool Cleaning
手工具清理
SSPC–SP 3 Power Tool Cleaning
电动工具清理
SSPC–SP 5 White Metal Blast Cleaning (NACE 1)
白金属喷砂清理(NACE 1)
SSPC–SP 6 Commercial Blast Cleaning (NACE 3)
工业级喷砂清理(NACE 3)
SSPC–SP 7 Brush–Off Blast Cleaning (NACE 4)
扫射喷砂清理(NACE 4)
SSPC–SP 8 Pickling
酸洗
Steam Condenser
蒸汽冷凝器
HEI Heat Exchanger Institute
热换器学会
TIA – Telecommunication Industry Association
TIA-通讯工业协会
TIA/EIA-455-B Standard Test Procedure for Fibre Optic Fibres, Cables, Transducers, Sensors,
Connecting and Terminating Devices, and other Fibre Optic Components.
光纤、光缆、变换器、传感器、连接和终端装置及其他光纤元件的标准
试验程序
TIA-568-C.0 Commercial Building Telecommunications Cabling Standard
商业建筑通信电缆布线标准
TIA-568-C.2 100-Ohm Balanced Twisted-Pair Cabling Standard
100欧姆平衡双绞线电缆布线标准
TIA-569 Commercial Building Standard for Telecommunications Pathways and
Spaces
商业建筑电信通道及空间标准
TIA-598-C Optical Fibre Cable Colour Coding - (January 2005)
光缆颜色编码 -(2005年1月)
TIA-606-A Administration Standard for the Telecommunications Infrastructure of
Commercial Building
业及建筑物电信基础结构的管理标准
TIA-942 Telecommunications Infrastructure Standard for Data Centres
数据中心电信基础设施标准
UL - Underwriters Laboratories
UL-保险商实验室
UL 1709 Rapid Rise Fire Test of Protection Material for Structural Steel
结构钢用防火材料急剧增长的防火测试 USNRC - United States Nuclear Regulatory Commission
USNRC-美国核管理委员会
USNRC Regulatory Guide 6.5 General Safety Standard for Installation using non-medical sealed Gamma – (Revision 1, July 2008) Ray sources.
USNRC管理导则6.5(第1修订使用非医疗密封伽马射线源设施的通用安全标准 版,2008年7月)
USNRC Regulatory Guide 7.3 Procedures for picking up and receiving package of radioactive material. (May 1975) 挑选并接收放射性物质包的程序
USNRC管理导则7.3(1975年5
月)
2. National Standards of other countries referenced to International Standards and acknowledge
by Cuban Authorities
2.其他国家参照国际标准并由古巴当局认可的国家标准
BS - British Standard
BS – 英国 标准
1377 Methods of test for soils for civil engineering purposes
木工程用土壤试验方法
1868 Specification for Steel Check Valves (Flanged and Butt-welding ends) for
Petroleum, Petrochemical and Allied Industries
石油、石油化学及有关工业用钢止回阀(有法兰及对焊端)规范
1873 Steel Globe and Globe Stop and Check Valves (Flanged and Butt-welding
ends) for Petroleum, Petrochemical and Allied Industries
石油、石油化学及有关工业用钢球形阀、球形截止阀与单向阀(有法兰及
对接焊端)规范
3799 Specification for Steel Pipe Fittings, Screwed and Socket Welding for
Petroleum Industry
石油工业用钢管件、螺旋管接头和套管焊接规范
Specification for Metric Dimensions of toroidal Sealing Rings (?O‘-rings) and 4518 their Housings
环形密封圈(―O―形环)及其安装座的米制尺寸规格
5352 Steel Wedge Gate, Globe and Check Valves 50mm and smaller for Petroleum,
Petrochemical and Allied Industries
石油、石油化学及有关工业用小于等于50mm的钢制楔式闸阀、截止阀
和止回阀
6349-2 Code of practice for marine structures – Part 2 Design of quay walls, jetties
and dolphins
海上建筑实用规程.第2部分:码头、栈桥和系靠船墩设计
6349-4 Code of practice for marine structures – Part 4 Design of Fendering and
Mooring Systems
海上建筑实用规程.第4部分:护舷系统和系泊系统的设计
8010-3 Pipelines subsea design construction and installation
海底管道设计施工和安装
CAN/CSA - Canadian Standard Association
CAN/CSA – 加拿大标准协会
Z245.20 External Fusion Bond Epoxy Coated Steel Pipe.
钢管熔结环氧粉末外涂层
DIN - Deutsches Institut für Normung
DIN – 德国标准化学会
15019-2 Cranes Stability for Non Rail Mounted Mobile Cranes –Test Loading and
Calculation
起重机.无轨道移动式起重机的稳定性.试验载荷与计算 30670 Polyethylene Sheathing of Steel Tubes and of Steel Shapes and fittings.
钢管及型钢和管件聚乙烯护套
Thermoset Plastic Coatings for Buried Steel Pipes 30671 埋地钢管热固性塑料涂层
30672 Coatings of Corrosion Protection Tapes and Heat Shrinkable Material for
Pipelines.
管道防腐胶带和热缩材料涂层
4024 Part 1 Machines foundations
4024 第1部分 机械基础
43760 Temperature Conversions Table for Pt 100 Ohm @ 0?C Resistance Elements.
100欧姆铂与0?C电阻元件的温度换算表
Testing of Plastics and Elastomer Films, Paper, Board and Other Sheet
53122 Materials – Determination of Water Vapour Transmission
塑料和弹性薄膜、纸、纸板和其它板材试验.水蒸气渗透性的测定
Methods of Test for Materials for Electrical Purposes – Measuring of the
53482 Electrical Resistance of Non-metallic Materials
电气用材料试验方法.非金属材料的电阻测量
DNV - Det Norske Veritas – Rules for Submarine Pipeline Systems
DNV – 挪威船级社 – 海底管线系统规章
OS-F101 Submarine Pipeline Systems
海底管线系统
DNV-RP-B401 Cathodic Protection Design
阴极保护设计
DNV-RP-F103 Cathodic Protection of Submarine Pipelines by Galvanic Anodes
海底管线电镀阳极阴极保护
DNV-RP-F109 On-Bottom Stability Design of Submarine Pipelines
海底管道在海床上的稳定性设计
DNV-RP-F105 Free Spanning Pipelines
自由悬跨管线
DNV-RP-F111 Interference Between Trawl Gear and Pipelines
拖网渔具和管线间的干扰
DNV-RP-F110 Global Buckling of Submarine Pipelines Structural
Design due to High Temperature/High Pressure
由高温/高压引起的海底管线结构总体屈曲 EAEC or Euratom - European Atomic Energy Community
EAEC或Euratom – 欧洲原子能共同体
--- European Commission Services considerations with regard to natural
radiation sources in BSS Directive, 16-January-2009.
欧洲委员会服务关于2009年1月16日BSS指令中天然辐射源的考虑 Council Directive 96/29/Euratom Basic Safety Standards for the protection of the health of workers and the
of 13 May 1996 general public against the dangers arising from ionising radiation 1996年5月13日理事会指令为保护工人和广大市民免受电离辐射产生的危险的基本安全标准 96/29/Euratom
EN - European Normative
EN – 欧洲规范
EN 10020 Definition and classification of grades of steel
钢的等级定义和划分
EN 10021 General technical delivery requirements for steel and iron products
钢铁制品的一般交货技术条件
EN 10025 Hot rolled products of structural steel
热轧结构钢产品
EN 10079 Definitions of steel products
钢制品定义
EN 10080 Steel for the reinforcement of concrete
混凝土增强用钢
EN 10113-1 Hot rolled products in weldable fine grain structural steels
热轧可焊接细晶粒结构钢制品
EN 10137-3 Plate and wide flats made of high yield strength structural steels
高屈服强度结构钢制薄板和宽扁钢
EN 10138 Prestressing steel
预应力钢材
EN 10204 Metallic Products – Type of Inspection Documents
金属产品-检验文件类型
Non-destructive Testing of Steel Forgings EN 10228 钢锻件无损检验
Steel Tubes and Fittings for on and Offshore Pipelines – External Two Layer
EN 10288 Extruded Polyethylene Based Coatings
岸上和近海管线用钢管及配件.外部双层挤压聚乙烯基涂层
Steel tubes and fittings for onshore and offshore pipelines - External liquid EN 10289 applied epoxy and epoxy-modified coatings
Steel tubes and fittings for onshore and offshore pipelines. External liquid
applied polyurethane and polyurethane-modified coatings EN 10290 岸上和近海管道用钢管和配件.外用液体涂刷的环氧涂料及环氧改性的涂
料
Cathodic protection - External organic coatings for the corrosion protection of
buried or immersed steel pipelines used in conjunction with cathodic
EN 12068 protection - Tapes and shrinkable materials
阴极保护.与阴极保护有关的埋于地下的或浸于水的钢管防腐的外部有机
涂层.磁带和可缩材料
EN 13480-1 Metallic industrial piping – General
金属工业管道.总则
EN 13480-2 Metallic industrial piping – Materials
金属工业管道.材料
EN 13480-3 Metallic industrial piping – Design and calculation
金属工业管道.设计和计算
EN 13480-4 Metallic industrial piping – Fabrication and Installation
金属工业管道.生产和安装
EN 13480-5 Metallic industrial piping – Inspection and Testing
金属工业管道.检验和测试
EN 1990 Eurocode : Basis of structural design
欧洲规范:结构设计基础
EN 1991 Eurocode 1 – Actions on structures
欧洲规范1:对结构产生的作用
EN 1992-1-1 Eurocode 2 – General rules and rules for buildings
欧洲规范2:一般规则和建筑物用规则
EN 1992-1-2 Eurocode 2 – Structural fire design
欧洲规范2:结构防火设计
EN 1992-2 Eurocode 2 – Design of concrete structures - Concrete bridges - Design and
detailing rules
欧洲规范2:混凝土结构的设计.混凝土桥.设计和详细规则 EN 1992-3 Eurocode 2 – Liquid retaining and containing structure
欧洲规范2:液体容纳和容器结构
EN 1993-1 Eurocode 3 – General design rules and rules for building,
欧洲规范3:一般设计规则和建筑物用规则
EN 1993-2 Eurocode 3 – Steel Bridge,
欧洲规范3:钢桥
EN 1993-3 Eurocode 3 – Tower, Masts and chimneys;
欧洲规范3:塔、杆和烟囱
EN 1993-4 Eurocode 3 – Silos, Tanks and pipelines;
欧洲规范3:筒仓、油罐和管道
EN 1993-5 Eurocode 3 – Piling;
欧洲规范3:打桩工程
EN 1993-6 Eurocode 3 – Crane supporting structures;
欧洲规范3:起重机支撑结构
EN ISO 898-1 Mechanical properties of fasteners made of carbon steel-alloy
碳钢和合金钢紧固件的机械性能
EN 81-1 Safety Rules for the construction and installation of lift – Part 1: Electric Lift
电梯制造与安装安全规范.第1部分:电梯
EN 81-7 Safety Rules for the construction and installation of lift – Part 7: Rack and
Pinion Lift
电梯制造与安装安全规范.第7部分:齿轮齿条电梯 F.E.M. 1.001 Rules for the design of hoisting appliances (European Federation of Material
Handling - Fédération Européenne de la Manutention)
起重机械设计规范(欧洲物料运输联合会)
ENV 13670 Execution of concrete structure
混凝土结构施工
EN - European Normative for Personal Protective Equipment (PPE)
EN – 欧洲个人防护设备(PPE)规范
EN 136 Respiratory protective devices. Full face masks. Requirements, testing,
marking
呼吸保护装置.全面罩.要求、试验、标记
EN 141 Respiratory protective devices. Gas filters and combined filters.
Requirements, testing, marking
呼吸保护装置.气体过滤器和组合过滤器.要求、试验、标记 EN 148-1 Respiratory protective devices: threads for face pieces. Standard thread
connection
呼吸保护装置.面罩螺纹.标准螺纹连接
EN 166 Personal eye protection. Specifications
个人眼镜保护.规范
EN 340 Protective clothing. General requirements
防护服.一般要求
EN 345-1 Requirements for safety footwear fitted with toecaps designed to give
protection against impact
旨在防冲击的加鞋头的安全鞋的要求
EN 352-2 Hearing protectors. Safety requirements and testing, generally about earplugs.
护听器.安全要求和试验.耳塞
EN 352-3 Hearing protectors. Safety requirements and testing. Ear-muffs attached to an
industrial safety helmet
护听器.安全要求和试验. 工业安全头盔的耳套
EN 374 Protective gloves against chemicals and micro-organisms
化学品和微生物防护手套
EN 388 Protective gloves against mechanical risks
机械风险防护手套
EN 397 Specification for industrial safety helmets
工业安全头盔规范
EN 407 Protective gloves against thermal risks (heat and/or fire)
防热保护手套(热和/或火)
EN 531 Protective clothing for workers exposed to heat
热接触工人的防护服
EN 1149-1 Protective clothing. Electrostatic properties. Test method for measurement of
surface resistivity
防护服.静电性能. 表面电阻测量的实验方法
EN 1149-2 Protective clothing. Electrostatic properties. Test method for measurement of
the electrical resistance through a material (vertical resistance)
防护服装.静电特性.通过材料的电阻(垂直电阻)的测量的实验方法 EN 13034 Protective clothing against liquid chemicals. Performance requirements for
chemical protective clothing offering limited protective performance against
liquid chemicals (Type 6 and Type PB [6] equipment)
液体化学品防护服.提供液体化学品有限防护性能的化学防护服性能要求
(6型和PB[6]型设备)
NS - Norsok Standards
NS – 挪威石油工业技术标准
3481 Soil investigation and design of marine structures
土壤调查和海事结构设计
8000 Geotechnical testing – laboratory methods
岩石测试—实验法
G-CR-001 Common requirements for marine soil investigations
海洋土壤调查一般要求
Y-001 Subsea Pipelines
海底管道
U.S. Army Corps of Engineers
美国陆军工程兵团
--- Shore Protection Manual
海岸保护手册
1110-2-1613 Hydraulic Design of Deep Draft Navigation Projects
装载量航道工程水力设计
Tm-5-1300 Structures Resist The Effects Of Accidental Explosions
结构抵御意外爆炸的影响
VDI
VDI 2056 Criteria for assessing mechanical vibrations of machines
评估机器的机械振动标准
3. National Standards of other countries not referenced to International Standards and not
acknowledge by Cuban Authorities (Chinese standard)
3.其他国家未参照国际标准且未被古巴当局认可的国家标准(中国标准)
GB – China National Standards
GB – 中国国家标准
Reinforcement (Rebar)
钢筋(螺纹钢)
GB 1499.1 Steel for the reinforcement of concrete
Part 1: Hot rolled plain bars
钢筋混凝土用钢 第1部分:热轧光圆钢筋 GB 1499.2 Steel for the reinforcement of concrete
Part 2: Hot rolled ribbed bars
钢筋混凝土用钢 第2部分:热轧带肋钢筋 Structural steel (Material)
结构钢(材料)
GB/T 700-2006 Carbon Structural steels
碳素结构钢
GB/T 1591-2008 High strength low alloy structural steels
低合金高强度结构钢
Structural steel (Shape steel)
结构钢(型钢)
GB/T 11263-2005 The hot-rolled H and cut T section
热轧H型钢和部分T型钢 YB 3301-2005 The welded steel H-section
焊接H型钢
GB/T 706-2008 Hot rolled section steel
热轧型钢
GB/T 8162-2008 Seamless steel tubes for structural purposes
结构用无缝钢管
GB/T 5117-1995 Carbon steel covered electrodes
碳钢焊条
GB/T 5118-1995 Low alloy steel covered electrodes
低合金钢焊条
YB/T 4001.1-2007 Steel bar grating and matching parts
Part 1: Steel bar grating
钢格栅板及配套件 第1部分:钢格栅板
YB/T 4001.1-2007 Steel bar grating and matching parts
Part 1: Steel bar grating
钢格栅板及配套件 第1部分:钢格栅板 GB/T 4159-2007 Hot Rolling Checker Plate and Strip
热轧花纹钢板和钢带
GB/T 17395-2008 Dimensions, Shapes, Masses and Tolerance of Seamless steel tubes
无缝钢管尺寸、外形、重量及允许偏差 GB/T 21835-2008 Dimensions and Masses per Unit Length of Welded Steel Pipes
焊接钢管尺寸及单位长度重量
Structural steel (Fastener)
结构钢(紧固件)
GB/T 1228-2006 High strength bolts with large hexagon head for steel structures
钢结构用高强度大六角头螺栓
GB/T 1229-2006 High strength large hexagon nuts for steel structures
钢结构用高强度大六角螺母
GB/T 1230-2006 High strength plain washers for steel structures
钢结构用高强度垫圈
GB/T 1231-2006 Specifications of high strength bolts with large hexagon head, large hexagon
nuts, plain washers for steel structures
钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件 GB/T 3077-1999 Alloy structure steels
合金结构钢
GB/T 5782-2000 Hexagon head bolts
六角头螺栓
GB/T 6170-2000 Hexagon nuts, style 1
1型六角螺母
GB/T 5780-2000 Hexagon head bolts – Product grade C
六角头螺栓C级
GB/T 41-2000 Hexagon nuts – Product grade C
六角螺母 C级
Coating and Galvanizing
涂层和镀锌
GB/T 13912-2002 Metallic Coatings – Hot dip Galvanized Coatings on Fabricated Iron and Steel
Articles – Specifications and Test Methods
金属覆盖层 钢铁制件热浸镀锌层 技术要求及试验方法