宽带掉线代码大全

宽带掉线代码大全 The code of : Error 602 The port is already open Problem: the dial-up network network cannot be connected because of the device installation error or is being used Why: PPPoE is not fully and properly installed Solution: uninstall any PPPoE software and reinstall it Error 605 always set port information Problem: dial-up network network because device installation error cannot set the usage port Why: PPPoE is not fully and properly installed Solution: uninstall any PPPoE software and reinstall it Error 606 The port is not connected Problem: the dial-up network cannot connect to the required device port Reason: PPPoE does not have complete and proper installation, connection line failure, ADSL MODEM failure Solution: uninstall any PPPoE software, reinstall, check line and ADSL MODEM Error 608 The device does not exist Problem: the device for the dial-up network connection does not exist Why: PPPoE is not fully and properly installed Solution: uninstall any PPPoE software and reinstall it Error 609 The device type does not exist Problem: the type of device that is connected to the dial-up network is uncertain Why: PPPoE is not fully and properly installed Solution: uninstall any PPPoE software and reinstall it Error 611 The route is not available / 612 The route is not Problem: dial-up network connection routing is not correct Why: PPPoE does not have complete and proper installation, ISP server failure Solution: uninstall any PPPoE software, reinstall, and call your ISP Error 617 The port or device is already disconnecting Problem: the device for the dial-up network connection is disconnected Why: PPPoE does not have complete and correct installation, ISP server failure, connection line, ADSL MODEM failure Solution: uninstall any PPPoE software, reinstall, call isps, check the offline and ADSL modems Error 619 Problem: no connection can be established with an ISP server Reason: ADSL ISP server failure, ADSL telephone line failure Solution: check to see if the ADSL light is synchronized correctly. Call your ISP inquiry Error 621 Cannot open the phone book file Error 622 Cannot load the phone book file Error 623 Cannot find the phone book entry Error 624 Cannot write the phone book file Error 625 Invalid information found in the phone book Problem: Windows NT or Windows 2000 Server network RAS network component failure Why: uninstall all PPPoE software and reinstall RAS network components and RasPPPoE Error 630 Problem: ADSL MODEM has no response Reason: ADSL telephone line failure, ADSL MODEM failure (power supply is not open, etc.) Solution: check the ADSL device Error 633 Problem: the dial-up network network cannot be connected because of the device installation error or is being used Why: PPPoE is not fully and properly installed Solution: uninstall any PPPoE software and reinstall it Error 638 Problem: after a long time, you can't connect to your ISP's ADSL access server Why: ISP server failure; You mistakenly entered a phone number in the bad connection that PPPoE created Solution: run the pppoe.exe, which creates the dial-up service, to check if the ISP service is available to determine the ISP's normal; The used dial-up connection Phone Numbers are cleared or only one 0 is left. Error 645 Problem: the network card didn't respond correctly Cause: network card failure, or network card driver malfunction Solution: check the network card and reinstall the network card driver Error 650 Problem: the remote machine has no response and disconnect Reason: the ADSL ISP server failure, the network card failure, the improper shutdown caused the network protocol to make a mistake Solution: check to see if the ADSL signal is properly synchronized and call the ISP. Check the network card and delete all network components to reinstall the network. Error 651 Problem: the ADSL MODEM report has an error Reason: Windows is in secure mode, or other errors Solution: when this error occurs, the new specific error code can be reported by reappropriation Error 691 Problem: the user name and password are incorrect, unable to establish a connection Reason: user name and password error, ISP server failure Solution: use the correct user name and password, and use the correct ISP account format (name @service) to call the ISP. Error 718 Problem: the remote computer timeout does not respond when authenticating the user name and disconnects Reason: the ADSL ISP server fails Solution: call the ISP to ask Error 720 Problem: the dial-up network fails to coordinate the protocol Settings of the servers in the network Reason: the ADSL ISP server failure, the improper shutdown caused the network protocol to make a mistake Solution: call the ISP to ask, remove all network components to reinstall the network. Error 734 Problem: the PPP connection control protocol is aborted Reason: the ADSL ISP server failure, the improper shutdown caused the network protocol to make a mistake Solution: call the ISP to ask, remove all network components to reinstall the network. Error 738 Problem: the server cannot assign the IP address Reason: the ADSL ISP server fails and the ADSL user has too many IP addresses that the ISP can provide Solution: call the ISP to ask Error 769 Problem: the network card is disabled or the network card driver is not installed correctly Solution: check that the network card driver is installed correctly. If the network card drives normal, it enters the device manager and sets the disabled Ethernet card status To enable, reconnect. Error 797 Problem: the ADSL MODEM connection device is not found Reason: the ADSL MODEM power source is not open, the connection line of network card and ADSL MODEM has a problem, the software installation has the corresponding agreement not Correctly binding, when creating a dial-up connection, the wrong empty connection is established Solution: check the power supply, connection line; Check the network properties, and the PPPoE protocol is properly installed and properly bound (related protocol), Are you checking the card? Number or! Number, set it to Enable; Check for the properties of the dial-up connection and whether the connection device is used "ISDN channel-adapter Name (xx)" device, which is an empty device, and if you use it, select positive The true PPPoE device replaces it, or recreates the dial-up connection. Here's the error code for using ADSL under VISTA: 798 You can't find a certificate that can be used for an extensible authentication protocol. 799 The Internet connection sharing access (ICS) cannot be enabled because of an IP address conflict. ICS requires that the host be configured for use 192.168.0.1. Verify that no other client is configured on the network for 192.168.0.1. 800 Unable to establish a VPN connection. The VPN server may not arrive, or the security parameters for this connection are not configured correctly. 801 This connection is configured to verify the identity of the access server, but Windows cannot verify the digital certificates sent by the server. 802 Unable to identify the card provided. Please check to see if the card is inserted properly. 803 The PEAP configuration saved in the session cookie does not match the current session configuration. 804 The PEAP id stored in the session cookie does not match the current identity. 805 You cannot use this connection dialing when logging in because it is configured to use the user id card after login. 806 The connection between the computer and the VPN server has been started, but the VPN connection cannot be completed. The most common cause of this problem is your plan At least one Internet device (such as a firewall or router) between the computer and the VPN server is not configured to allow general routing (GRE) protocol package. If the problem persists, contact your network administrator or Internet service provider. 807 The network connection between the computer and the VPN server is interrupted. This is probably due to problems arising from the transmission of the VPN, usually Internet latency or just the result of a VPN server having reached capacity limits. Try reconnecting to the VPN server. If the problem Still exist, please contact the VPN administrator and analyze the quality of the network connection. 808 Unable to establish a network connection between a computer and a VPN server because the remote server rejects the connection. This is usually due to the server configuration Does not match the connection Settings. Please contact the administrator of the remote server to verify the server configuration and connection Settings. 809 Unable to establish a network connection between a computer and a VPN server because the remote server does not respond. This may be because the computer is not far away Some network devices (such as firewalls, NAT, routers, etc.) between the process server are configured to allow VPN connections. Please refer to the administrator or service The broker is contacted to determine which device may cause this problem. 810 The network connection between the computer and the VPN server has been started, but the VPN connection is not complete. This is usually due to incorrect or overuse The certificate of the period is the result of authentication between the client and the server. Please contact the administrator to ensure that the certificate for authentication is available Effect of. 811 Unable to establish a network connection between a computer and a VPN server because the remote server does not respond. This is typically due to the client and the server The result of a Shared key problem between the two. The pre-shared key is used to ensure that you are identified in the IP security Settings (IPSec) communication cycle It is. Ask the administrator for help to determine where the pre-shared key problem comes from. 812 The connection is blocked because of a policy configured on the RAS/VPN server. In particular, the server is used to verify the identity of the user name and password The authentication method may not match the authentication method configured in the connection configuration file. Contact the administrator of the RAS server and make this error Inform them. 813 In the case of the previous broadband connection, you tried to establish another broadband connection using the same device or port. Please disconnect the previous one Connect, and then reestablish the connection. 814 You can't find the basic Ethernet connection required for a broadband connection. Before attempting this connection, install and install on the computer via the network connection folder Enable the Ethernet adapter. 815 Unable to establish a broadband connection on the computer because the remote server is not responsive. This is probably due to the "service name" field of the connection The value is invalid. Please contact the Internet service provider, ask for the correct value of this field, and update it in the connection properties. 816 Remote access services no longer support the functions or Settings you are trying to enable. 817 Cannot delete a connection when it is connected. 818 The network access protection (NAP) force client cannot create system resources for remote access connections. Some network services or resources may not be available. Such as If the problem persists, disconnect the connection, retry remote access connection, or connect with the administrator of the remote access server. 819 The network access protection agent (NAPAgent) service is disabled or not installed in this machine. Some network services or resources may not be available. If the problem persists, disconnect the connection, retry remote access connection, or connect to the administrator of the remote access server. 820 The network access protection (NAP) force client is unable to register network access protection agent (NAPAgent) service. Some network services or resources Can not be available. If the problem persists, disconnect the connection, retry remote access connection, or connect to the administrator of the remote access server. 821 The network access protection (NAP) force client cannot handle requests because remote access connections do not exist. Please retry the remote access connection. if The problem persists, make sure you can connect to the Internet, and then contact the administrator of the remote access server. 822 The network access protection (NAP) force client has no response. Some network services or resources may not be available. If the problem persists, disconnect Then, retry remote access connections, or the administrator of a remote access server. 823 The received encryption binding TLV is invalid. 824 No encrypted binding TLV is received. 825 Point-to-point tunnel protocol (P) is incompatible with IPv6. Change the type of the virtual private network to the second layer tunnel protocol (L2TP) 826 The cache credential EAPTLS validation fails. Discard the cache credentials. 827 Since the IKE and AuthIP IPSec key module service and/or basic filter engine service are not running, the L2TP/IPSec connection is not available To complete. These services are required to establish the L2TP/IPSec connection. Make sure these services are enabled before dialing