欧洲管道
(EN pipe standards)
ANSI | BS | DIN | EN | GB | ISO | JIS | NF | DIC
编号
中文名称
英文名称
CR 12952-17-2002
锅炉水管道和辅助设备 第17部分:独立于制造商的检查机构参与指南
Water boilers and auxiliary installations - Part 17: Guideline for the involvement of an inspection body independent of the manufacturer
CR 13932-2000
旋转动力泵 管道系统的进口和出口管件建议书
Rotodynamic pumps - Recommendations for fitting of inlet and outlet on piping
EN 10208-1-1997
易燃流体管道用钢管 交货技术条件 第1部分:符合A类要求的管材
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A
EN 10208-2-1996+AC-1996
易燃流体管道用钢管 交货技术条件 第2部分:符合B类要求的管材
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
EN 1053-1995
塑料管道系统 无压力情况下使用的热塑管道系统 水密封性的试验方法
Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness
EN 1054-1995
塑料管道系统 粪便和污水排放用热塑管道系统 连接件气密性试验方法
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints
EN 1055-1996
塑料管道系统 建筑物内粪便和污水排放用热塑管道系统 抗周期性升温的试验方法
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
EN 1093-6-1998
机械安全 空气中有害物质排放的评估 第6部分:通过未经管道流出的质量来评价分离离效率
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet
EN 1093-7-1998
机械安全 空气中有害物质排放的评估 第7部分:通过经管道流出的质量来评价分离离效率
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet
EN 1115-1-1997
压力下地下排水和排污装置用塑料管道系统 基于非饱和聚酯树脂的玻璃增强热固性塑料(GRP) 第1部分:概述
Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 1: General
EN 1115-3-1996
压力下地下排水和排污装置用塑料管道系统 基于非饱和聚酯树脂的玻璃增强热固性塑料(GRP) 第3部分:配件
Plastics piping systems for underground drainage and sewerage under pressure - Glassreinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings
EN 1115-5-1996
压力下地下排水和排污装置用塑料管道系统 基于非饱和聚酯树脂的玻璃增强热固性塑料(GRP) 第5部分:连接
Plastics piping systems for underground drainage and sewerage under pressure - Glassreinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints
EN 1119-1996
塑料管道系统 玻璃增强热固塑料管和配件用接头 挠性和还原接合接头密封性和耐损伤性试验方法
Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints
EN 1120-1996
塑料管道系统 玻璃增强热固塑料管和配件 偏斜条件下内部一个截面耐化学品侵袭的测定
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition
EN 1123-1-1999
废水系统用带套管的纵向焊接热浸镀锌钢管管道及配件 第1部分:要求、测试和质量控制
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
EN 1123-1/prA1-2002
废水系统用带套管的纵向焊接热浸镀锌钢管管道及配件 第1部分:要求、测试和质量控制 修改A1
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; Amendment A1
EN 1123-2-1999
废水系统用带套管和插口的纵向焊接热浸镀锌钢管管道及配件 第2部分:尺寸
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions
EN 1124-1-1999
废水系统用带套管和插口的纵向焊接不锈钢管管道及配件 第1部分:要求、测试、质量控制
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
EN 1124-1/prA1-2002
废水系统用带套管和插口的纵向焊接不锈钢管管道及配件 第1部分:要求、测试、质量控制 修改A1
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; Amendment A1
EN 1124-2-1999
废水系统用带套管和插口的纵向焊接不锈钢管管道和配件 第2部分:系统S 尺寸
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S - Dimensions
EN 1124-3-1999
废水系统用带套管和插口的纵向焊接不锈钢管管道及配件 第3部分:系统X 尺寸
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions
EN 12056-2-2000
建筑物内的重力排水系统 第2部分:卫生间管道工程的布局和计算
Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation
EN 12061-1999
塑料管道系统 热塑性管件 耐冲击试验方法
Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
EN 12095-1997
塑料管道系统 雨水管道系统用托架 托架强度的试验方法
Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength
EN 12099-1997
塑料管道系统 聚乙烯管材和组件 挥发含量的测定
Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content
EN 12100-1997
塑料管道系统 聚乙稀(PE)阀门 支架间抗弯曲性的试验方法
Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
EN 12106-1997
塑料管道系统 聚乙稀(PE)管 压出后抗内压性的试验方法
Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off
EN 12107-1997
塑料管道系统 压注热塑管件、阀门和辅助设备 管道组件压注用热塑 材料的长期液压强度的测定
Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
EN 12117-1997
塑料管道系统 热塑管件、阀门和配件 气流速率/压降之间关系的测定
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships
EN 12118-1997
塑料管道系统 用库仑计测定热塑性塑料中水分
Plastics piping systems - Determination of moisture content in thermoplastics by coulometry
EN 12119-1997
塑料管道系统 聚乙烯(PE)阀门 抗热循环测试方法
Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling
EN 12200-1-2000
地面上外部使用的塑料雨水管道系统 未增塑聚乙烯(聚氯乙烯)(PVC-U) 第1部分:管道、配件和系统用规范
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
EN 12201-1-2003
供水系统用塑料管道系统 聚乙烯(PE) 第1部分:总则
Plastics piping systems for water supply - Polyethylene (PE) - Part 1: General
EN 12201-2-2003
供水系统用塑料管道系统 聚乙烯(PE) 第2部分:管道
Plastics piping systems for water supply - Polyethylene (PE) - Part 2: Pipes
EN 12201-3-2003
供水系统用塑料管道系统 聚乙烯(PE) 第3部分:配件
Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings
EN 12201-4-2001
供水系统用塑料管道系统 聚乙烯(PE) 第4部分:阀门
Plastics piping systems for water supply - Polyethylene (PE) - Part 4: Valves
EN 12201-5-2003
供水系统用塑料管道系统 聚乙烯(PE) 第5部分:系统目的的适配性
Plastics piping systems for water supply - Polyethylene (PE) - Part 5: Fitness for purpose of the system
EN 12220-1998
建筑物通风 管道系统 一般通风用圆法兰盘的测定
Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation
EN 12236-2002
建筑物通风 管道悬架和支架 强度需求
Ventilation for buildings - Ductwork hangers and supports - Requirements for strength
EN 12237-2003
建筑物通风 管道系统 圆片金属管的强度和泄漏
Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts
EN 1225-1996
塑料管道系统 玻璃增强热固性塑料管 潮湿条件下蠕变因子的测定和长期特定环刚度的计算
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness
EN 12256-1998
塑料管道系统 .热塑性塑料配件 装配式配件机械强度或挠度的试验方法
Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
EN 1226-1996
塑料管道系统 玻璃增强热固性塑料管 验证初期环状物挠曲阻力的试验方法
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection
EN 1227-1997
塑料管道系统 玻璃增强热固性塑料管 潮湿条件下长期最终相关环状物挠曲的测定
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate relative ring deflection under wet conditions
EN 1228-1996
塑料管道系统 玻璃增强热固性塑料管 初始特定环刚度的测定
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness
EN 1229-1996
塑料管道系统 玻璃增强热固性塑料管 验证短期内部压力下墙的密封性试验方法
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure
EN 12293-1999
塑料管道系统 热水和冷水用热塑性塑料管道和接头 安装组件耐热循环性的试验方法
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
EN 12294-1999
塑料管道系统 热水和冷水系统 真空下气密性的试验方法
Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
EN 12295-1999
塑料管道系统 热水和冷水用热塑性塑料管道和接头 接合处耐压力循环试验方法
Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling
EN 12308-1998
液化天然装置和设备 液化天然气管道中所用的法兰接头垫圈设计适配性试验
Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping
EN 12474-2001
水下管道的阴极保护
Cathodic protection of submarine pipelines
EN 12514-2-2000
燃油炉供油系统用的装置 第2部分:安全要求和试验 零部件、阀门、管道、滤油器、油气分离器、油量指示
Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters
EN 12585-1998
玻璃设备、管道和配件 DN15至1000管道和配件 兼容性和互换性
Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1000 - Compatibility and interchangeability
EN 12735-1-2001
铜和铜合金 空调和制冷用无缝圆铜管 第1部分:管道系统用管子
Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
EN 1277-1996
塑料管道系统 地下无压用热塑管道系统 弹性密封环型接头密封性试验方法
Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
EN 12842-2000
PVC-U或PE管道系统用可球墨铸铁配件 要求和试验方法
Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
EN 1295-1-1997
不同荷载条件下地下管道结构设计 第1部分:一般要求
Structural design of buried pipelines under various conditions of loading - Part 1: General requirements
EN 12954-2001
掩埋或浸没金属结构的阴极保护 一般原理和管道应用
Cathodic protection of buried or immersed metallic structures - General principles and application for pipelines
EN 13052-1-2001
材料对人类生活用水的影响 有机物 管道系统中水的颜色和浊度的测定 第一部分:试验方法
Influence of materials on water intended for human consumption - Organic materials; Determination of colour and turbidity of water in piping systems - Part 1: Test method
EN 13090-2000
建筑物中气体管道螺纹接头再密封方法
Means for resealing threaded joints of gas pipework in buildings
EN 13136-2001
制冷系统和加热泵 压力释放设备及相关管道 计算方法
Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation
EN 13180-2001
建筑物通风 管道系统 柔性管的尺寸和机械要求
Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts
EN 13220-1998
与医用气体管道系统的终端设备相连的流量计
Flow-metering devices for connection to terminal units of medical gas pipeline systems
EN 13244-1-2002
地上和地下给排水和污水压力系统用塑料管道 聚已烯(PE) 第1部分:总则
Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General
EN 13244-2-2002
地上和地下给排水和污水压力系统用塑料管道 聚已烯(PE) 第2部分:管道
Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 2: Pipes
EN 13244-3-2002
地上和地下给排水和污水压力系统用塑料管道 聚已烯(PE) 第3部分:配件
Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 3: Fittings
EN 13244-4-2002
地上和地下给排水和污水压力系统用塑料管道 聚已烯(PE) 第4部分:阀门
Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves
EN 13244-5-2002
地上和地下给排水和污水压力系统用塑料管道 聚已烯(PE) 第5部分:系统适用度
Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 5: Fitness for purpose of the system
EN 1329-1-1999
建筑物结构内污物和废水排放(低和高温)用塑料管道系统 硬塑聚氯乙烯(PVC-U) 第1部分:管材、管件和系统规
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
EN 13312-1-2001
生物技术 管道和仪器性能标准 第1部分:一般的性能标准
Biotechnology - Performance criteria for piping and instrumentation - Part 1: General performance criteria
EN 13312-2-2001
生物技术 管道和仪器性能标准 第2部分 联接器
Biotechnology - Performance criteria for piping and instrumentation - Part 2: Couplings
EN 13312-3-2001
生物技术 管道和仪器性能标准 第3部分:取样和接种装置
Biotechnology - Performance criteria for piping and instrumentation - Part 3: Sampling and inoculation devices
EN 13312-4-2001
生物技术 管道和仪器性能标准 第4部分:管子和导管
Biotechnology - Performance criteria for piping and instrumentation - Part 4: Tubes and pipes
EN 13312-5-2001
生物技术 管道和仪器性能标准 第5部分:阀
Biotechnology - Performance criteria for piping and instrumentation - Part 5: Valves
EN 13312-6-2001
生物技术 管道和仪器性能标准 第6部分:设备探头
Biotechnology - Performance criteria for piping and instrumentation - Part 6: Equipment probes
EN 1333-1996
管道工程元件 定义和PN的选择
Pipework components - Definition and selection of PN
EN 13403-2003
建筑物通风 非金属管道 由绝热道管板制成的管道系统
Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards
EN 13467-2001
建筑设备和工业装置用保温制品 预成型管道保温层的尺寸、垂直度和直线度的测定
Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation
EN 13469-2001
建筑设备和工业装置用保温制品 预成型管道保温层水蒸气传导性的测定
Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation
EN 13470-2001
建筑设备和工业装置用保温制品 预成型管道保温层表观密度的测定
Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation
EN 13472-2001
建筑设备和工业装置用保温制品 通过部分沉浸法测定预成型管道保温层的短期吸水性
Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation
EN 13480-1-2002
工业用金属管道 第1部分:总则
Metallic industrial piping - Part 1: General
EN 13480-2-2002
工业用金属管道 第2部分:材料
Metallic industrial piping - Part 2: Materials
EN 13480-3-2002
工业用金属管道 第3部分:设计和计算
Metallic industrial piping - Part 3: Design and calculation
EN 13480-4-2002
工业用金属管道 第4部分:制造和安装
Metallic industrial piping - Part 4: Fabrication and installation
EN 13480-5-2002
工业用金属管道 第5部分:检查和测试
Metallic industrial piping - Part 5: Inspection and testing
EN 13544-2-2002
呼吸治疗设备 第2部分:管道和连接器
Respiratory therapy equipment - Part 2: Tubing and connectors
EN 13566-1-2002
用于修复非压力排水和污水网的塑料管道系统 第1部分:总则
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General
EN 13566-3-2002
用于修复非压力排水和污水网的塑料管道系统 第3部分:带密装配管的衬套
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes
EN 13566-4-2002
用于修复非压力排水和污水网的塑料管道系统 第4部分:带现场固化管的衬套
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes
EN 13598-1-2003
非压力底下排水和污水塑料管道系统 非增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE) 第1部分:包括
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers
EN 1366-1-1999
服务设施的耐火试验 第1部分:管道
Fire resistance tests for service installations - Part 1: Ducts
EN 1366-5-2003
服务设施的耐火试验 第5部分:作业管道和烟囱
Fire resistance tests for service installations - Part 5: Service ducts and shafts
EN 13689-2002
用于修复的塑料管道系统的分类和设计指南
Guidance on the classification and design of plastics piping systems used for renovation
EN 1393-1996+AC-1997
塑料管道系统 玻璃增强热固性塑料(GRP)管 初始径向拉伸特性的测定
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties
EN 1394-1996+AC-1997
塑料管道系统 玻璃增强热固性塑料(GRP)管 外观初始圆周抗拉强度的测定
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
EN 13942-2003
石油和天然气工业 管道运输系统 管道阀门
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999, modified)
EN 1401-1-1998
非压力地下雨水管和污水管用塑料管道系统未增塑聚氯乙烯(PVC-U) 管道 第1部分:配件和系统规范
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
EN 1411-1996
塑料管道和导管系统 热塑管 用阶梯法测定抗外冲击能力
Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method
EN 14163-2001
石油和天然气工业 管道运输系统 管道的焊接
Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified)
EN 1420-1-1999
有机材料对民用水的影响 管道系统中水气味的测定 第1部分:试验方法
Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Part 1: Test method
EN 1437-2002
塑料管道系统 地下排水和污水用管道系统 耐温度循环和外部负荷综合作用的试验方法
Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading
EN 1444-2000
纤维水泥管道 现场工作实践和铺设指南
Fibre-cement pipelines - Guide for laying and on-site work practices
EN 1446-1996
塑料管道及导管系统 热塑管 环挠形测定
Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
EN 1447-1996
塑料管道系统 玻璃增强热固性塑料管 (GRP) 长期耐内压能力的测定
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
EN 1448-1996
塑料管道系统 玻璃增强热固塑料(GRP)组件 带弹性密封件的刚性锁紧插承接合的设计查验试验方法
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals
EN 1449-1996
塑料管道系统 玻璃纤维增强热固性塑料(GRP)组件 查检水泥套管插承接合设计的试验方法
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of cemented socket-and-spigot joints
EN 1450-1996+A1-1998
塑料管道系统 玻璃增强热固塑料(GRP)组件 螺栓法兰连接的设计查验试验方法
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange joints
EN 1451-1-1998
建筑物结构内污物和废水排出(低和高