如何通过路由器进入猫
一般的路由器跟猫的ip默认的都是192.168.1.1,我们就以此为例说明如何设置,使得我们能方便的跨过路由进入猫。
路由正确安装完应该能正常上网了,我们从正确安装好路由之后开始讲。以xp系统为例 步骤1设置本地连接ip
点击你的“网上邻居”设置你的本地链接的ip,如下图
说明一下
这个数字2其实可以设置成2-254之间的任何一个数字
步骤2
在地址栏里输入路由的ip \\192.168.1.1 回车就进入到路由登陆界面了。(解释一下:因为电脑跟路由是直接连着的,你本地连接ip跟路由设置成一个网段后。输入路由的ip,进入的就是路由器了)
be appropriate, legible. 6.4.3-core line, set the set into the direction should be determined according to the Terminal installed, when a Terminal row of vertical installation, on the line number (Word) should be arranged horizontally, from left to right
摁玩回车就打开路由的登陆界面了如图
路由默认用户名admin 密码也是admin,点击确定进入路由。 步骤三设置路由
1找到参数设置,里面有个LAN口设置,IP地址设置成192.168.2.1如下图
再设置wan口,正常的wan口设置如下图
be appropriate, legible. 6.4.3-core line, set the set into the direction should be determined according to the Terminal installed, when a Terminal row of vertical installation, on the line number (Word) should be arranged horizontally, from left to right
WAN口连接类型是PPPoE,点这个箭头,选静态ip,如下图填写,然后保存
be appropriate, legible. 6.4.3-core line, set the set into the direction should be determined according to the Terminal installed, when a Terminal row of vertical installation, on the line number (Word) should be arranged horizontally, from left to right
解释一下:
这里的ip地址是设置的往上一层网络的ip地址,当然我们可以设置成192.168.1.x。因为猫的ip一般默认的是192.168.1.1。我们要把路由的wan口设置成与猫处于同一个网段,只有这样才能通过路由访问到猫。
这里的网关填192.168.1.1,即猫的ip
然后点保存。
这样就设置完毕了。
在你电脑地址栏里输入,192.168.2.1就能进入路由器,输入192.168.1.1就能进入猫,看看线路的上下行速率,线路衰减什么的就行了。但是这时候电脑是不能访问internet的。要想正常上网你在你的路由里还需要把wan口设置成PPPoE,然后点保存,就能正常上网了。下次再想入猫的时候,只要在路由里把wan口改成静态ip再点保存就行了。
be appropriate, legible. 6.4.3-core line, set the set into the direction should be determined according to the Terminal installed, when a Terminal row of vertical installation, on the line number (Word) should be arranged horizontally, from left to right