江苏省盱眙县人民医院_14064

江苏省盱眙县人民医院_14064 江苏省盱眙县人民医院 (编号:gk-201309) 心电工作站-运动平板 江苏省盱眙县人民医院 江苏省盱眙招投标管理中心制 二?一三年八月六日 edges should be cleaned, after making sure that no defect shall be marked with a marker pen to write down welding near the weld, including the slogan of welding, welders, etc. (16) welding Qian Preheat and the welding Hou heat treatment pipe welding Qian Preheat and the welding Hou heat treatment process conditions welding Qian Preheat and the welding Hou heat treatment temperature table project material welding Qian preheat temperature (?) welding Hou heat treatment and the insulation time (?/H) wall thick (mm) temperature (?) wall thick (mm) temperature (?) 20 ? 26 100~200 >36 600~650/1-1.5 15CrMo ? 10 150~200 >10 670~700/1.2-2 Preheat and the heat treatment process in the, Inner and outer wall temperature shall be kept uniform, in order to avoid internal stresses. Preheating before welding and post weld heat treatment, shall measure and record the temperature, temperature measurement locations and number of points are reasonable. Prone to weld delayed crack of steel, post weld heat treatment after welding should be carried out promptly, when not conducting timely post weld heat treatment, should be uniformly heated to 200~300? immediately after welding and insulation and slow cooling, ... 26mm more than 20 steel pipe welding preheating before welding should be carried out, 36mm the above heat treatment after welding should be done. Before welding and heat treatment used oxyacetylene flame heating, heat treatment after welding using special heat treatment after welding equipment. Hardness after heat treatment of welds needed testing. 6.5.4 sides of the dissimilar steel welding when were non-austenitic steel or austenitic steel, alloy content according to lower one side of the base metal or selecting welding material in between. When one of the sides of material when austenitic steels, should select the 盱眙县招投标管理中心根据《中华人民共和国政府招投标法》、《中华人民共和国政府采购法》的规定，对盱眙县人民医院心电工作站(运动平板)进行公开招标，欢迎有相应供货、服务能力的企业，就下列全新货物和相关服务提交密封投标。 一、招标设备内容: 心电工作站-运动平板 1套 二、投标、开标时间、地点。 1、开标时间:2013年8月30日下午15:30时。 2、投标、开标地点:盱眙县招投标管理中心 三、投标保证金 1、中标方保证金转作履约保证金;若不中标保证金在开标后全额无息退还。 2、保证金转为履约金后，如退还，须持招标方的验收清单或验收证明，签署意见加盖单位公章到中心药械科审核后退还。 3、发生下列情况，投标保证金将被没收: 3.1、投标方在投标有效期内撤回投标或中标后未履行合同。 3.2、中标方未按中标通知书指定的时间、地点与招标方签定合同。 四、投标文件的组成 1、商务资格: 1.1、企业法人营业执照。 1.2、税务登记证、组织机构代码证。 1.3、医疗器械注册证(包括副件:医疗器械产品注册登记表、加盖投标单位公章)。 1.4、医疗器械经营(生产)企业许可证。 1.5、代理或经销证明(加盖投标单位公章)。 1.6、投标人的身份证明。 1.7、售后服务承诺(提供生产方或总代理承诺书、加盖投标单位公章)。 1.8、其它能证明企业规模、技术水平、经济实力、社会信誉的证书等。 注:以上为副本原件开标时现场审核，投标文件內复印件加盖投标单位公章。 1.9、法人代表证明或签字授权委托书(原件加盖投标单位公章)。 2.0、投标方必须为一般纳税人，开具增值税普通发票。 2、投标报价(原件，加盖投标单位公章): 2.1、本次投标设备以一次报价为准(人民币)，任何有选择的报价不予接受。 2.2、报价包括采购设备及辅助工程(材料)、运输、装卸、安装、调试、培训、规费、税金、商检报告、计量检定、检测验收等所有费用。 edges should be cleaned, after making sure that no defect shall be marked with a marker pen to write down welding near the weld, including the slogan of welding, welders, etc. (16) welding Qian Preheat and the welding Hou heat treatment pipe welding Qian Preheat and the welding Hou heat treatment process conditions welding Qian Preheat and the welding Hou heat treatment temperature table project material welding Qian preheat temperature (?) welding Hou heat treatment and the insulation time (?/H) wall thick (mm) temperature (?) wall thick (mm) temperature (?) 20 ? 26 100~200 >36 600~650/1-1.5 15CrMo ? 10 150~200 >10 670~700/1.2-2 Preheat and the heat treatment process in the, Inner and outer wall temperature shall be kept uniform, in order to avoid internal stresses. Preheating before welding and post weld heat treatment, shall measure and record the temperature, temperature measurement locations and number of points are reasonable. Prone to weld delayed crack of steel, post weld heat treatment after welding should be carried out promptly, when not conducting timely post weld heat treatment, should be uniformly heated to 200~300? immediately after welding and insulation and slow cooling, ... 26mm more than 20 steel pipe welding preheating before welding should be carried out, 36mm the above heat treatment after welding should be done. Before welding and heat treatment used oxyacetylene flame heating, heat treatment after welding using special heat treatment after welding equipment. Hardness after heat treatment of welds needed testing. 6.5.4 sides of the dissimilar steel welding when were non-austenitic steel or austenitic steel, alloy content according to lower one side of the base metal or selecting welding material in between. When one of the sides of material when austenitic steels, should select the 3、投标内容说明: 3.1、投标方应详细阅读本招标文件中所有内容，投标文件必须对本招标文件的内容做出完全响应，否则投标将被评委会有权视为废标。 3.2、投标方对所投设备的相关技术有文字说明材料。 3.3、招标文件中技术参数不清的或遗漏未报条款中技术参数，评委现场已作0分处理的，最后总分仍是最高是中标单位的，其技术参数仍按招标文件中技术参数要求满足，不能满足招标文件中技术参数作废标处理。对投标文件中概念不清的评委会也可视为废标处理。 3.4、遗漏未报设备配置其中标后仍以招标文件中的配置技术参数要求执行，否则视为废标。 3.5、招标文件中，对招标机型配置与技术参数未作具体说明要求的，中标机型配置与技术参数不得低于递交宣传彩页与资料的说明承诺。 4投标文件的技术参数一定要与实际设备的技术参数一致，如投标文件中的技术参数只是为了满足招标文件的要求，即使中标，一旦被发现(评委当场发现、举报、验收设备查出)也将作废标处理，同时上述欺诈应标的投标商将上盱眙县招投标药械网站作黑名单公布。 、售后服务承诺:保修时间及故障维修时间的反应。 5 6、投标方近期的财务报表及本次所招标产品的工作业绩。 7、投标文件正本一份，副本四份，若正本与副本不符，以正本为准。一律打印装订文本，不得涂改，密封后加盖单位骑缝章。 五、评标、定标原则 1、在评标过程中，各评委独立打分，投标商得分,评委分值总和/评委人数。 2、评标采用综合评定法，考虑下列因素:价格、商务资质与品牌性能、售后服务及其它优惠条件进行分值计算。 3、评分办法(100分、详见附件): 4、在评标过程中，评标人员有权要求投标商对投标文件进行澄清说明，不澄清者，评标委员会有权作废标处理。 5、在同一区域，投标商所投同一品牌、同一型号、同样配置的设备在没有国家临时性调价基础上必需保证在履行合同前后六月内我院中标价不高于其它价格，若经了解核实高出价格部分由投标商补回差价。 6、依据投标方的得分高低确定唯一中标人，不设第二中标人。 7、评标结束后，当日公布评标结果，并接受投标单位监督。 六、中标通知、供货合同的签定 1、盱眙县招标投标管理中心和盱眙县人民医院联合签发中标通知书。 2、中标方凭中标通知书与招标方签定合同，并报招标投标管理中心备案。 edges should be cleaned, after making sure that no defect shall be marked with a marker pen to write down welding near the weld, including the slogan of welding, welders, etc. (16) welding Qian Preheat and the welding Hou heat treatment pipe welding Qian Preheat and the welding Hou heat treatment process conditions welding Qian Preheat and the welding Hou heat treatment temperature table project material welding Qian preheat temperature (?) welding Hou heat treatment and the insulation time (?/H) wall thick (mm) temperature (?) wall thick (mm) temperature (?) 20 ? 26 100~200 >36 600~650/1-1.5 15CrMo ? 10 150~200 >10 670~700/1.2-2 Preheat and the heat treatment process in the, Inner and outer wall temperature shall be kept uniform, in order to avoid internal stresses. Preheating before welding and post weld heat treatment, shall measure and record the temperature, temperature measurement locations and number of points are reasonable. Prone to weld delayed crack of steel, post weld heat treatment after welding should be carried out promptly, when not conducting timely post weld heat treatment, should be uniformly heated to 200~300? immediately after welding and insulation and slow cooling, ... 26mm more than 20 steel pipe welding preheating before welding should be carried out, 36mm the above heat treatment after welding should be done. Before welding and heat treatment used oxyacetylene flame heating, heat treatment after welding using special heat treatment after welding equipment. Hardness after heat treatment of welds needed testing. 6.5.4 sides of the dissimilar steel welding when were non-austenitic steel or austenitic steel, alloy content according to lower one side of the base metal or selecting welding material in between. When one of the sides of material when austenitic steels, should select the 七、供货时间 1、合同签定后30日内由中标方送货到盱眙县人民医院指定地点，并由中标方负责安装、调试、培训完毕，逾期视作违约处理，逾期一天处以总价0.1%的罚款。 八、验收、方法 1、投标方在交货时，所交产品必须和投标书中所提供的产品一致，在相关技术人员在场的情况下开箱清点货物，并安装、调试。产品须有合格证、装箱单、产品安装使用说明书、质保单等相关资料和保养、维修所需特殊工具。 2、招标方将邀请有关技术人员，按照招标文件对所供产品的配置要求、技术性能及投标单位提出的其它技术参数进行验收。 3、设备安装后，医院按国际和国家标准及厂方标准进行质量验收。中标方应向招标方提供详细的验收标准、验收手册。招标方有权委托中国有资格的单位对上述仪器进行校核、商检、计量检定等，相关费用由中标方负责。 九、付款方式 仪器设备到位安装、调试、检测、验收合格付70% ，三个月付20% ，余款如设备无质量问一年后付清。 十、本招标文件有如下附件 1、附件一、心电工作站-运动平板主要配置和技术参数 2、附件二、评分办法 联系地址:盱眙县招投标管理中心 0517,88223719 盱 眙 县 人 民 医 院 0517,88231807 edges should be cleaned, after making sure that no defect shall be marked with a marker pen to write down welding near the weld, including the slogan of welding, welders, etc. (16) welding Qian Preheat and the welding Hou heat treatment pipe welding Qian Preheat and the welding Hou heat treatment process conditions welding Qian Preheat and the welding Hou heat treatment temperature table project material welding Qian preheat temperature (?) welding Hou heat treatment and the insulation time (?/H) wall thick (mm) temperature (?) wall thick (mm) temperature (?) 20 ? 26 100~200 >36 600~650/1-1.5 15CrMo ? 10 150~200 >10 670~700/1.2-2 Preheat and the heat treatment process in the, Inner and outer wall temperature shall be kept uniform, in order to avoid internal stresses. Preheating before welding and post weld heat treatment, shall measure and record the temperature, temperature measurement locations and number of points are reasonable. Prone to weld delayed crack of steel, post weld heat treatment after welding should be carried out promptly, when not conducting timely post weld heat treatment, should be uniformly heated to 200~300? immediately after welding and insulation and slow cooling, ... 26mm more than 20 steel pipe welding preheating before welding should be carried out, 36mm the above heat treatment after welding should be done. Before welding and heat treatment used oxyacetylene flame heating, heat treatment after welding using special heat treatment after welding equipment. Hardness after heat treatment of welds needed testing. 6.5.4 sides of the dissimilar steel welding when were non-austenitic steel or austenitic steel, alloy content according to lower one side of the base metal or selecting welding material in between. When one of the sides of material when austenitic steels, should select the 心电工作站(运动平板)主要配置和技术参数 一、主要配置 1、心电发射盒 1个 2、心电接收盒 1个 3、运动心电导联线 1套 4、专用跑台 1台 5、品牌电脑(显示器?19″、硬盘:?250G、内存:?1G) 1套 6、激光打印机 1台 7、系统处理软件 1套 8、操作台 1个 9、产品说明书、保修卡、合格证等 1套 10、其它安装调试用电极片、磨砂备皮片、数据连接线、电池等 1套 二、主要技术参数 1、专用跑台选用静音电机，动力强劲、噪音低。 2、专用跑台最大承重量:?160Kg、坡度范围:?0-25?、速度:?0-13.5Km/h。 3、自动、保持或手动方式调节运动平板。 4、发射和接收范围:明视距离?100m。 5、12 道标准导联心电波形采样和显示。 6、无线心电发射盒/接收盒确保心电图质量、理想病人隔离、自由移动和抗干扰。 7、ST段自动分析功能，心律失常分析功能，回顾功能。 8、具有十二导联心电图、心率变异性分析、QT离散度、频谱心电图、向量心电图、时间向量心电图等功能。 9、实时的分析、编辑、打印、保存，有多种报告格式。 10、支持多种运动平板和踏车。 11、可以接入医院的数据管理系统。 edges should be cleaned, after making sure that no defect shall be marked with a marker pen to write down welding near the weld, including the slogan of welding, welders, etc. (16) welding Qian Preheat and the welding Hou heat treatment pipe welding Qian Preheat and the welding Hou heat treatment process conditions welding Qian Preheat and the welding Hou heat treatment temperature table project material welding Qian preheat temperature (?) welding Hou heat treatment and the insulation time (?/H) wall thick (mm) temperature (?) wall thick (mm) temperature (?) 20 ? 26 100~200 >36 600~650/1-1.5 15CrMo ? 10 150~200 >10 670~700/1.2-2 Preheat and the heat treatment process in the, Inner and outer wall temperature shall be kept uniform, in order to avoid internal stresses. Preheating before welding and post weld heat treatment, shall measure and record the temperature, temperature measurement locations and number of points are reasonable. Prone to weld delayed crack of steel, post weld heat treatment after welding should be carried out promptly, when not conducting timely post weld heat treatment, should be uniformly heated to 200~300? immediately after welding and insulation and slow cooling, ... 26mm more than 20 steel pipe welding preheating before welding should be carried out, 36mm the above heat treatment after welding should be done. Before welding and heat treatment used oxyacetylene flame heating, heat treatment after welding using special heat treatment after welding equipment. Hardness after heat treatment of welds needed testing. 6.5.4 sides of the dissimilar steel welding when were non-austenitic steel or austenitic steel, alloy content according to lower one side of the base metal or selecting welding material in between. When one of the sides of material when austenitic steels, should select the 附件二、评分办法(100分) 一、价格分(70分): 以各投标方投标报价(总价)的算术平均值为基准价，等于基准价得70分，每高出基准价的1500元扣0.1分，每低于基准价的1500元加0.1分，以此类推，顺延两位小数点。 二、商务资质、品牌性能分(24分;在完全满足招标文件的情况下，评委对每一品牌的最低分不得少于18分，即各专家评委对不同品牌的打分分值相差应小于6分): 1、专用跑台选用静音电机，动力强劲、噪音低。评委根据参数高低打分，最高不超过2分。 2、专用跑台最大承重量:?160Kg、坡度范围:?0-25?、速度:?0-13.5Km/h。评委根据参数高低打分，最高不超过2分。 3、自动、保持或手动方式调节运动平板。评委根据参数高低打分，最高不超过2分。 4、发射和接收范围:明视距离?100m。评委根据参数高低打分，最高不超过2分。 5、12 道标准导联心电波形采样和显示。评委根据参数高低打分，最高不超过1.5分。 6、无线心电发射盒/接收盒确保心电图质量、理想病人隔离、自由移动和抗干扰。评委根据参数高低打分，最高不超过2分。 7、ST段自动分析功能，心律失常分析功能，回顾功能。评委根据参数高低打分，最高不超过2分。 8、具有十二导联心电图、心率变异性分析、QT离散度、频谱心电图、向量心电图、时间向量心电图等功能。评委根据参数高低打分，最高不超过2分。 9、实时的分析、编辑、打印、保存，有多种报告格式。评委根据参数高低打分，最高不超过1.5分。 10、支持多种运动平板和踏车。评委根据参数高低打分，最高不超过1分。 11、可以接入医院的数据管理系统。评委根据参数高低打分，最高不超过1分。 12、评委会对完全响应的投标文件进行打分和比较，根据投标方资质、品牌、规模、信誉、质量、技术参数、市场占有率等确定分值，最高分和最低分为3一5分。 三、售后服务分(4分): 1、所投设备及附件免费保修期不得低于1年;整机免费(含维修费、配件费、差旅费等所有费用)保修12个月得1.5分，保修24个月得2.5分，保修36个月得3分，最高不超过3分。(提供生产方或总代理承诺书) 2、如设备发生故障，投标方接到设备故障报修后，2小时内响应，12小时内到位维修得0.25分;最高不超过0.5分。 3、提供软件的终身免费升级，超出保修期免收维修费，仅收维修配件费;每年巡回保edges should be cleaned, after making sure that no defect shall be marked with a marker pen to write down welding near the weld, including the slogan of welding, welders, etc. (16) welding Qian Preheat and the welding Hou heat treatment pipe welding Qian Preheat and the welding Hou heat treatment process conditions welding Qian Preheat and the welding Hou heat treatment temperature table project material welding Qian preheat temperature (?) welding Hou heat treatment and the insulation time (?/H) wall thick (mm) temperature (?) wall thick (mm) temperature (?) 20 ? 26 100~200 >36 600~650/1-1.5 15CrMo ? 10 150~200 >10 670~700/1.2-2 Preheat and the heat treatment process in the, Inner and outer wall temperature shall be kept uniform, in order to avoid internal stresses. Preheating before welding and post weld heat treatment, shall measure and record the temperature, temperature measurement locations and number of points are reasonable. Prone to weld delayed crack of steel, post weld heat treatment after welding should be carried out promptly, when not conducting timely post weld heat treatment, should be uniformly heated to 200~300? immediately after welding and insulation and slow cooling, ... 26mm more than 20 steel pipe welding preheating before welding should be carried out, 36mm the above heat treatment after welding should be done. Before welding and heat treatment used oxyacetylene flame heating, heat treatment after welding using special heat treatment after welding equipment. Hardness after heat treatment of welds needed testing. 6.5.4 sides of the dissimilar steel welding when were non-austenitic steel or austenitic steel, alloy content according to lower one side of the base metal or selecting welding material in between. When one of the sides of material when austenitic steels, should select the 养仪器2次以上，回访仪器使用情况及解决一些实际应用中的问题。在设备的使用寿命期内，保证使用方更换到原厂正宗的零部件，确保设备的正常使用，最高不超过0.5分。 四、附加分(2分) 1、报出配件及易耗品成交价格，视同样配件及易耗品成交价高低，依次打分，最多得0.5分。 2、投标方随机配置相关配件、耗材，视配件及耗材多少，依次打分，最多得0.5分。 3、提供近两年以来三级以上医院同型号设备的用户名单，根据名单多少，依次打分，最高不超过0.5分，无用户者可做废标处理，若造假者即使中标一经查实作废标并追加赔偿中标价2倍以上的经济损失(需提供医院名称及加盖公章的所投型号设备中标合同复印件)。 4、提供其它相关优惠条件，依次打分，最多得0.5分。 依据投标方的得分高低确定唯一中标人，不设第二中标人。 投标方所投设备型号必须满足招标方要求的配置和技术参数，并且所交设备的配置与技术参数不得低于提交的彩页、文本等说明的要求。否则评标委员会有权视为废标。 edges should be cleaned, after making sure that no defect shall be marked with a marker pen to write down welding near the weld, including the slogan of welding, welders, etc. (16) welding Qian Preheat and the welding Hou heat treatment pipe welding Qian Preheat and the welding Hou heat treatment process conditions welding Qian Preheat and the welding Hou heat treatment temperature table project material welding Qian preheat temperature (?) welding Hou heat treatment and the insulation time (?/H) wall thick (mm) temperature (?) wall thick (mm) temperature (?) 20 ? 26 100~200 >36 600~650/1-1.5 15CrMo ? 10 150~200 >10 670~700/1.2-2 Preheat and the heat treatment process in the, Inner and outer wall temperature shall be kept uniform, in order to avoid internal stresses. Preheating before welding and post weld heat treatment, shall measure and record the temperature, temperature measurement locations and number of points are reasonable. Prone to weld delayed crack of steel, post weld heat treatment after welding should be carried out promptly, when not conducting timely post weld heat treatment, should be uniformly heated to 200~300? immediately after welding and insulation and slow cooling, ... 26mm more than 20 steel pipe welding preheating before welding should be carried out, 36mm the above heat treatment after welding should be done. Before welding and heat treatment used oxyacetylene flame heating, heat treatment after welding using special heat treatment after welding equipment. Hardness after heat treatment of welds needed testing. 6.5.4 sides of the dissimilar steel welding when were non-austenitic steel or austenitic steel, alloy content according to lower one side of the base metal or selecting welding material in between. When one of the sides of material when austenitic steels, should select the