赛门铁克250-365

赛门铁克250-365 Vendor: 250-365 Exam Code: Data Protection Administration for Windows(NBU 6.5) Exam Name: Symantec Version: 3.00 分卷: A 1: What should be entered into the SIZE_DATA_BUFFERS file to set the data buffer size to 64 KB? A.BUFFERSIZE = 64 B.BUFFERSIZE = 65536 C.64 D.65536 Correct Answers: D Explanation: 2: Given the following information about a policy with a single UNIX client: Allow Multiple Data Streams is enabled. ALL_LOCAL_DRIVES is specified. Media multiplexing is set to 6. Three tape drives are available in the storage unit, and MPX per drive is 2. Max Jobs per Client is set to 8. The client has five local file systems with no exclude list. How many backups will be active (versus queued) after the policy is successfully invoked? A.2 B.5 C.6 D.8 Correct Answers: B Explanation: 3: Which three factors determine the number of data streams that can run concurrently? (Select three.) A.available devices B.network bandwidth C.multiplexing setting D.MAX_STREAMS setting E.maximum jobs per client setting Correct Answers: ACE 4: Which two logs are used to determine the performance of a backup to a tape drive over the network? (Select two.) A.bprd B.bpcd C.bptm D.bpbkar E.bpdm Correct Answers: CD 5: What is the default length of time before NetBackup moves a backup job from an Incomplete state to a Done state? A.three minutes B.three hours C.three days D.three weeks 1 Correct Answers: B 6: An administrator needs a complete list of tapes, indicating tape status for each volume pool. What will provide this information? A.All Tape Properties report B.Tape Summary report C.bpmedialist -all D.available_media Correct Answers: D Explanation: 7: Which statement is true about the NetBackup Support Utility (NBSU)? A.NBSU provides information about the NetBackup configuration only; NBOS is required for OS and hardware information. B.NBSU runs checks on the Enterprise Media Manager (EMM) database to determine if there are inconsistencies. C.NBSU can be invoked from the console by selecting Help -> Gather support information. D.NBSU collects data on NetBackup as well as the operating system and hardware. Correct Answers: A 8: Media serverA has performed a backup of ClientB. An administrator needs to perform a restore of data to ClientB, and media serverA is currently busy doing backups. Which setting in Host Properties can be changed under the General Server tab to accommodate this? A.Alternate client restore B.Media host override C.Media host overwrite D.Alternate server restore Correct Answers: B 9: An administrator is reviewing the available_media output. If the robot type is listed as NONE, where is the tape physically located? A.in the tape library in the NetBackup domain B.in a different tape library in the NetBackup domain C.out of the tape library D.out of the robot tape drive Correct Answers: C 10: Which report shows backup IDs? A.Tape Lists B.Images on Tape C.Tape Summary D.Status of Backups Correct Answers: B 2 11: A tape with media ID ABC001 is assigned to the Scratch volume pool. A policy is configured to use the Servers volume pool. The policy runs, and media ID ABC001 is automatically assigned to the Servers volume pool from the Scratch pool. All the images on media ID ABC001 expire. In a default NetBackup 6.5 configuration, in which volume pool will media ID ABC001 appear? A.None B.Servers C.NetBackup D.Scratch Correct Answers: D Explanation: 12: Which report could provide a list of media that were used in the last five hours? A.Tape Written B.Tape Lists C.Tape Contents D.Tape Summary Correct Answers: A Explanation: 13: Which three are listed in the Detailed Status tab of backup jobs? (Select three.) A.job PID B.master server C.policy type D.storage unit E.media server Correct Answers: ADE 14: What is used to analyze which tapes are allocated for backups and which tapes are ready to write backups? (Select two.) A.Tape Lists report B.Images on Media report C.Tape Contents report D.bpexpdate command E.available_media command Correct Answers: AE 15: Data from ClientA has been backed up, and the data needs to be restored back to ClientA. Assuming that the media server has Media Server Only privilege, on which two machines can this be accomplished? (Select two.) A.master server B.ClientB C.ClientA D.media server E.NOM server Correct Answers: AC 16: A restore must be performed. The administrator is trying to view the valid images for a client, but the following error occurs: WARNING: Server does not contain any valid images. Which three may be incorrectly configured? (Select three.) A.source client for restores B.destination client for restores C.server to use for backups and restores D.media server for 3 restore E.policy types for restore Correct Answers: ACE 17: A prioritized storage unit group is configured with: Two basic disk storage units One tape storage unit that is configured with three DLT tape drives What happens if a backup is running to this storage unit group and one of the two basic disk storage units becomes full as the job is being written to it? A.The backup will continue on another media server if "media server spanning" is enabled and a storage unit is free. B.The backup will continue to a tape on the same media server. C.The backup can continue on the other disk storage unit (if available) in the group if "disk spanning" is enabled. D.The backup will fail because spanning is only allowed on tape storage units. Correct Answers: C Explanation: 18: Which two are valid considerations about duplication in NetBackup? (Select two.) A.Duplications may be performed without using Vault. B.In any multiple media server environment, the source and destination media must reside on the same media server. C.An entire tape is copied block by block from source to destination. D.Unexpired images can be duplicated from source to destination. E.Due to formatting concerns, tape drives used in the duplication must be of the same media type. Correct Answers: AD 19: Which statement describes the frozen media status? A.Frozen tapes are available for restores and must be imported. B.Frozen tapes are available for restores but are unavailable for backups until all other images on the tape have expired. C.Frozen tapes are available for restores but are unavailable for backups. D.Frozen tapes are available for restores and are only considered for backups if other media is unavailable. Correct Answers: C Explanation: 20: What are three functions of the EMM server? (Select three.) A.to provide a decentralized data store B.to provide a centralized data store C.to manage the allocation of resources D.to communicate with media servers E.to store the centralized image catalog Correct Answers: BCD 21: Which two must be verified when installing multiple media servers? (Select two.) A.License keys are available for all the new media servers. B.The master server has access to media server binaries. C.Root or Administrator access is available on the media servers. D.Media server license keys are available to the client. E.Tape drives are available and 4 configured on the new media servers. Correct Answers: AC 22: Given a NetBackup (NBU) architecture with the EMM and master servers on two separate hosts, in addition to nbemm, which NBU components are configured on the EMM server? A.nbproxy, nbrb, pbx B.nbproxy, nbjm, pbx C.nbrb, nbjm, pbx D.nbrb, nbjm, nbproxy Correct Answers: A Explanation: 23: What is updated during a NetBackup installation on Windows 2003? A.C:\WINDOWS\System32\drivers\etc\hosts and Windows Registry B.C:\WINDOWS\System32\drivers\etc\services and Windows Registry C.C:\WINDOWS\System\drivers\etc\hosts D.C:\WINDOWS\System\drivers\etc\services Correct Answers: B Explanation: 24: An administrator has just successfully installed a NetBackup 6.5 master server with a remote EMM host. In addition to bprd, bpjobd, and nbpem, which additional processes would be running on the master server? A.bpdbm, nbjm B.bpdbm, nbemm C.bpbrm, nbjm D.bpbrm, nbemm Correct Answers: A Explanation: 25: The NetBackup system administrator has been tasked with creating a policy for a Windows client. The client has millions of small files on the system and needs the ability to restore a single file. Which policy type should the administrator use? 5 A.Raw-partition B.FlashBackup-Windows C.FlashBackup D.Raw-partition-Windows Correct Answers: B Explanation: 26: Which NetBackup service must be running on a Windows client to enable backup and recovery? A.NetBackup Backup Service B.NetBackup Core Service C.NetBackup Client Service D.NetBackup Authorization Service Correct Answers: B Explanation: 27: Which three processes can run on a media server? (Select three.) A.bpbrm B.bpdm C.bprd D.bpdbm E.bptm Correct Answers: ABE 28: Given an architecture with multiple NetBackup master servers and a remote EMM host, which bp.conf entry must exist on all master servers? A.EMMCLIENT B.EMMSERVER C.EMMHOST D.EMMMASTER Correct Answers: D Explanation: 29: Which cmd script performs a silent installation for Microsoft Windows clients? A.installsilent B.silentclient C.clientinstall 6 D.windowsclient Correct Answers: B Explanation: 30: Which two NetBackup Operations Manager databases are required to recover from a nightly snapshot backup? (Select two.) A.VxATDB B.VxAM C.VxNOM D.VxPMDB E.VxNDB Correct Answers: BD 31: Which three guidelines should be followed before conducting a NetBackup media server installation? (Select three.) A.Any other vendor backup software should be uninstalled. B.At least one tape drive should be available for backup operations. C.Network connectivity should be established between NetBackup hosts. D.It should be verified that the server's hardware and OS version are supported. E.Previous versions of NetBackup in a Windows environment should be removed. Correct Answers: ACD 32: Which NetBackup 6.5 option automates selection and duplication of backup images? A.FlashSnap B.PureDisk C.Vault D.Inline Tape Copy Correct Answers: C Explanation: 33: A new NetBackup UNIX client has been configured, and only the root file system (/) is being backed up. All file systems should be backed up. What should be done to back up all file systems? A.select Cross mount points B.use ALL_LOCAL_FILES in the file list C.use /* in the file list D.use ALL_LOCAL_FILESYSTEMS in the file list Correct Answers: A Explanation: 34: Where in the NetBackup Administration console does the administrator create a disk location for backups? 7 A.Attributes B.Storage C.Device groups D.Disk Pools Correct Answers: B Explanation: 35: Where is Maximum Partially Full (MPF) configured? A.through the media server host properties B.through the storage unit properties C.through the volume group properties D.through the volume pool properties Correct Answers: D Explanation: 36: An administrator wants to use multiple disk destinations for backup. What is the recommended configuration for disk storage destinations in NetBackup using BasicDisk? A.a folder for each destination and a storage unit for each subdirectory B.a drive letter for each destination and a storage unit for drive letter C.a drive letter for each destination and a single storage unit D.a folder for each destination and a single storage unit Correct Answers: B Explanation: 37: What is the default media multiplexing level on a policy schedule? A.0 B.1 C.2 D.3 8 Correct Answers: B Explanation: 38: Where in the media server host properties does an administrator configure the number of retries for restores? A.Universal Settings -> Retry intervals B.General Server -> Restore retries C.Universal Settings -> Restore retries D.General Server -> Restore intervals Correct Answers: C Explanation: 39: Which two set up disk spanning to allow backups to span multiple BasicDisk storage units? (Select two.) A.select Host Properties -> Media Servers -> Media -> Allow backups to span disks B.select Storage Units -> Storage Unit -> Allow backup to span disks C.configure a storage unit group and add all disk storage units regardless of media server D.configure a storage unit group that consists of only disk storage units defined on a single media server E.confirm Round Robin storage unit selected at group level A.AD Correct Answers: Explanation: 40: Which two statements are true about NetBackup LiveUpdate? (Select two.) A.It is used to install VBR release updates. B.It is used in a clustered environment. C.It is used to install NOM release updates. D.It is used on NDMP servers. E.It is used to update PBX. A.BE Correct Answers: Explanation: 41: What is required in order to perform remote server administration with a Java console? A.a valid user on the Windows domain B.a valid user on the NetBackup master server C.a valid user in the bp.conf D.a valid user on the NetBackup Client Machine Correct Answers: B Explanation: 9 42: How should an administrator verify Windows tape device driver operation? A.run the scan command B.run vmoprcmd -listdrv C.run robtest on the media server D.run tpconfig on the servers connected to the tape device Correct Answers: A Explanation: 43: Which command is used to manage volume pools? A.nbemmcmd B.vmpool C.nbpool D.vmchange Correct Answers: B Explanation: 44: What is the default media server SCSI reserve setting? A.SCSI Persistent reserve B.SPC-2 SCSI reserve C.SPC-3 SCSI reserve D.SPC-4 SCSI reserve Correct Answers: B Explanation: 45: By default, how long is true image restore information kept in the NetBackup catalog? A.1 day B.3 days C.7 days D.30 days 10 Correct Answers: A Explanation: 46: In addition to a Full backup, which two are requirements for a synthetic backup? (Select two.) A.User backup B.Incremental backup C.Multiplexing D.Multistreaming E.TIR with move detection A.BE Correct Answers: Explanation: 47: What is the state of the hot-catalog backup media at the successful completion of a catalog recovery using the wizard? A.Suspended B.Full C.Imported D.Frozen Correct Answers: D Explanation: 48: Which setting affects the maximum number of destinations configurable in a storage lifecycle? A.Host Properties -> Global Attributes -> Maximum backup copies B.Host Properties -> Universal Settings -> Maximum backup copies C.Host Properties -> Global Attributes -> Maximum lifecycle copies D.Host Properties -> Universal Settings -> Maximum lifecycle copies Correct Answers: A Explanation: 49: How is the Netbackup Storage Lifecycle Command Utility executed? A.bpstlutil B.nbstlutil C.bpslputil D.nbslputil Correct Answers: B 11 Explanation: 50: Which two policy types are used for NetWare server NSS volume backup? (Select two.) A.Novell B.NetWare C.AFS D.NSS volume E.Standard A.BE Correct Answers: Explanation: 51: Which three can be automatically defined when an administrator is using the Device Configuration Wizard in the NetBackup Administration console? (Select three.) A.robots B.drives C.barcode rules D.media type E.storage units A.ABE Correct Answers: Explanation: 52: What is the maximum number of volumes for a cold (off-line) catalog backup on the Catalog Attributes tab? A.1 B.2 C.3 D.4 Correct Answers: B Explanation: 53: Which three capabilities are available in the calendar-based scheduler? (Select three.) A.run a user backup job on the third calendar day of the month B.exclude catalog backups C.exclude a backup job on a specific date D.retry the job after run day E.run a backup job on the last calendar day of the month A.CDE Correct Answers: Explanation: 54: Which delimiter should be used between email addresses to email a disaster recovery report to more than one recipient? A.period B.colon C.semi-colon 12 D.comma Correct Answers: D Explanation: 55: In which two places is media sharing enabled? (Select two.) A.in the Server Group configuration B.in the Volume Group configuration C.in the master server host properties under Media D.in the Volume Pool configuration E.in options for each individual media A.AC Correct Answers: Explanation: 56: A new NetBackup client is installed that must communicate across a firewall to its master/media server. Which NetBackup process helps reduce the number of ports that must be opened in the firewall? A.vopied B.bpcd C.vnetd D.bpinetd Correct Answers: C Explanation: 57: Where does an administrator add an include list for a Windows client in Host Properties? A.Client properties -> Windows clients -> Exclude List -> Exclude List area B.Client properties -> Windows clients -> Include List -> Include List area C.Client properties -> Windows clients -> Exclude List -> Exceptions to the Exclude List area D.Client properties -> Windows clients -> Include List -> Exceptions to the Exclude List area Correct Answers: C Explanation: 58: Tapes are frozen because they were previously used by another application. Which parameter needs to be modified? A.Media servers host properties -> Allow media overwrite B.Master servers host properties -> Allow multiple retention per media C.Master servers host properties -> Allow foreign media 13 D.Media servers host properties -> Allow multiple retention per media Correct Answers: A Explanation: 59: What must be done before configuring a new AdvancedDisk disk pool? A.define an AdvancedDisk storage server B.create an AdvancedDisk storage unit C.inventory the AdvancedDisk drives D.turn on the AdvancedDisk attribute on the master Correct Answers: A Explanation: 60: When installing NetBackup, an administrator selects a server type for the LiveUpdate agent. What does the server type specify? A.the operating system of the master server B.the operating system of the LiveUpdate server C.how to access the master server D.how to access the release updates Correct Answers: D Explanation: 61: AdvancedDisk storage units are unable to span which type of backup targets? A.a different volume in the disk pool B.a volume with a different file system C.from one disk pool to another D.from one disk array to another Correct Answers: C Explanation: 62: Which NetBackup process is responsible for scheduling backup jobs on the master server? A.nbemm 14 B.bpsched C.nbpem D.bpjobd Correct Answers: C Explanation: 63: A NetBackup catalog recovery has failed. Which location contains a log of the recovery? A.install_path\NetBackup\logs\bprecover B.install_path\NetBackupDB\logs C.install_path\NetBackup\logs\user_ops\username\logs D.install_path\NetBackup\logs Correct Answers: C Explanation: 64: Which two commands are used for configuring and managing unified logging? (Select two.) A.vxlogcfg B.mklogdir C.vxlogconf D.vxlogmgr E.vxlogview F.mkdirlog A.AD Correct Answers: Explanation: 65: NetBackup is unable to communicate with a Windows media server tape device after it has been configured. Which steps should be taken to troubleshoot this problem? A.check the Device Manager and verify the tape driver B.check the Device Manager and device configuration file C.check the Device Manager and driver.conf D.check the Device Manager and the bpdm log Correct Answers: A Explanation: 66: A hot catalog backup in a mixed NetBackup environment Master 6.5.x and Media Server 5.x fails with Status code 25: cannot connect on socket. The C:\Program Files\Veritas\NetBackup\logs\admin log shows that NetBackup Master 6.5.x is trying to connect to a 5.x Media Server: :00:35.456 [22363] <2> local_getAllBEorNBHostInfo: Can't connect to . Errno = 150: Which command is used to determine the media server's status (online or offline)? 15 A.nbemm B.vmoprcmd C.nbemmcmd D.bpmedia Correct Answers: B Explanation: 67: Which command is used to display error code information from a command prompt? A.bperror B.bperrorcmd C.nberr D.nperror Correct Answers: A Explanation: 68: During hot, online catalog recovery, the DR file is unavailable, but the images database is intact. What is the first step to resolve this issue? A.identify catalog backup from the images database B.run import on all media in the robot C.import catalog image to disk to a temporary location D.run bprecover -wizard from the command line with additional switches Correct Answers: A Explanation: 69: Which three options are available when selecting a media ID in the NetBackup Administration console? (Select three.) A.quick erase B.long erase C.mount D.unload E.freeze A.ABE Correct Answers: Explanation: 70: Which NetBackup process is responsible for reading and writing to a tape device? A.bpdm 16 B.bptm C.ltidm D.bpbrm Correct Answers: A Explanation: 71: A tape library has just had the robot firmware upgraded, and now the robot is reading the barcodes with additional characters. Which rule can be set so that NetBackup uses the same characters as before the firmware upgrade occurred? A.MediaID generation rule B.MediaID display rule C.Barcode rule D.Barcode generation rule Correct Answers: A Explanation: 72: Where are the definitions for status codes of failed jobs found? (Select two.) A.NetBackup Administration Console -> Status Codes -> Definitions B.NetBackup Administration Console -> Help -> Troubleshooter C.NetBackup Troubleshooting Guide D.NetBackup System Administrators Guide E.NetBackup Administration Console -> Failed Jobs -> Troubleshooter A.BC Correct Answers: Explanation: 73: Every time there is a backup attempt of the client named alpha, the NetBackup administrator receives the following error: Status Code 58: can't connect to client Which command can be used to help determine if the NetBackup client service is listening? A.bpclntcmd B.bpplclient C.bptestbpcd D.bpclient Correct Answers: C Explanation: 17 74: The NetBackup Startup/Shutdown scripts for Windows can be found in which directory? A.install_path\NetBackup\bin\admincmd B.install_path\NetBackup\bin C.install_path\NetBackup\bin\admincmd\support D.install_path\NetBackup\bin\goodies Correct Answers: B Explanation: 75: Which NetBackup tool is available to test a tape library? A.robtest B.tptest C.scan D.tpconfig Correct Answers: C Explanation: 76: A backup job exits with Status Code 1: the requested operation was partially successful. How is this exit code analyzed? A.review the bpdbjobs log file on the master server B.review All Log Entries under Reports on the master server C.review the bpdbm log file on the master server D.review device monitor status Correct Answers: B Explanation: 77: After successfully installing three UNIX clients, all backups for those clients fail with Status Code 59: access to the client was not allowed. What should the system administrator do to resolve this problem? A.make host file entries for all three UNIX clients on the master server B.add all three UNIX client names to the master server's vm.conf file C.verify that the media server is listed in the bp.conf file 18 D.edit the .rhosts file on the client and add the master server name Correct Answers: C Explanation: 78: Which script is used to create legacy log directories? A.mklogsdir B.mklogdir C.mkdirlog D.mkdirlogs Correct Answers: B Explanation: 79: What effect does Enable Robust logging have on logging? A.It enables log rotation for legacy logs. B.It enables enhanced verbose detail in logs. C.It enables logs when an error is encountered. D.It enables log size limits of unified logs. Correct Answers: A Explanation: 80: An administrator has successfully recovered all NetBackup catalogs, which used the only two catalog backup tapes. A number of backups have taken place, and a catalog backup is run automatically. The catalog backup fails with an error code 96. The administrator investigates and finds that all of the tapes have been allocated. What is the cause of this error? A.The catalog recovery freezes the catalog tapes. B.The catalog recovery freezes the catalog tapes in the NBU-Catalog Volume Pool. C.The catalog recovery suspends the catalog tapes. D.The catalog recovery suspends the catalog tapes in the NBU-Catalog Volume Pool. Correct Answers: A Explanation: 81: A NetBackup administrator receives Status Code 41: network connection timed out for some backups of a client. Which parameter can be modified to help resolve this problem? 19 A.BPCD_KEEPALIVE B.BPTM_WRITE_TIMEOUT C.CLIENT_READ_TIMEOUT D.CLIENT_BPSTART_TIMEOUT Correct Answers: D Explanation: 82: After replacing a tape drive, which command should be run to update the NetBackup device configuration? A.tpautoconf -replace -drive B.tpconfig -replace_drive C.tpautoconf -replace_drive D.tpconfig -replace -drive Correct Answers: C Explanation: 83: Where can an administrator determine which Release Updates have been installed on a Windows NetBackup master server? A.install_path\Veritas\Pack\patch.log B.install_path\NetBackup\Version.log C.install_path\Veritas\Pack\History.log D.install_path\Veritas\Patch\History.log E.install_path\Veritas\Package\pack.log Correct Answers: D Explanation: 84: An administrator is checking the status of a standalone drive in Device Monitor. The Control column status reads AVR, and the Ready column status is No. What does this indicate? A.The drive is down. B.The drive is up and under operator control. C.The drive is up, and it is empty. 20 D.The drive is up, but the tape in the drive is busy. Correct Answers: C Explanation: 85: A company has a Windows NetBackup client running NetBackup 6.0 MP4 and a supported database. The administrator is upgrading this client and database agent to 6.5 without using LiveUpdate. What is required to upgrade to the 6.5 client? A.install the 6.5 database agent and then install the 6.5 client software B.install the 6.5 client software and then install the 6.5 database agent C.install the 6.5 client software, which includes the database agent D.download the 6.5 client software and then run the update command Correct Answers: C Explanation: 86: In NetBackup and Media Manager, which two configurations are allowed? (Select two.) A.storage unit media type=DLT, device=DLT, robot=TLD B.storage unit media type=DLT2, device=DLT, robot=TLD C.storage unit media type=DLT2, device=DLT2, robot=TL8 D.storage unit media type=DLT2, device=DLT2, robot=TLD E.storage unit media type=DLT4, device=DLT4, robot=TLD A.AD Correct Answers: Explanation: 87: Where in the NetBackup administration console is a NetBackup media server configured so it will communicate via a specific NIC? A.NetBackup Management -> Host Properties -> Media Servers -> Universal Settings -> Use specified network interface B.NetBackup Management -> Host Properties -> Media Servers -> Global Attributes -> Use required network interface C.NetBackup Management -> Host Properties -> Master Server -> Universal Settings -> Network D.NetBackup Management -> Host Properties -> Media Servers -> Global Attributes -> Use specified network interface E.NetBackup Management -> Host Properties -> Media Servers -> Firewall Correct Answers: A Explanation: 88: What is the location of the device mapping file on a Windows media server? A.install_path\volmgr\misc B.install_path\netbackup\var\global C.install_path\netbackup\var\mappings D.install_path\volmgr\mappings E.install_path\netbackup\db\config 21 Correct Answers: B Explanation: 89: A NetBackup client and media server are separated by a slow, overburdened wide area network (WAN) connection. Which policy attribute should be enabled to minimize the amount of data that travels over the WAN? A.Compression B.Allow multiple data streams C.Encrypt D.Enable throttle Correct Answers: A Explanation: 90: Backup Exec tapes have been added to the robot to be overwritten by NetBackup images. Which action should be taken to ensure these tapes are overwritten? A.select Allow media overwrite in the Media section of the media server Host Properties B.select Allow multiple retentions per media in the Media section of the media server Host Properties C.select BE under Allow media overwrite in the Media section of the media server Host Properties D.select BE-MTF1 under Allow media overwrite in the Media section of the media server Host Properties E.select Allow server file writes in the Universal Settings section of the master Host Properties Correct Answers: D Explanation: 91: Which command should be used to display NetBackup policies? A.bplist B.bpplist C.nbpllist D.bppolicylist E.bppllist Correct Answers: E Explanation: 22 分卷: B 1: In which directory is it possible to create aliases for NetBackup clients? A.aliases B.altnames C.althosts D.altpaths Correct Answers: B Explanation: 2: Under the master server Host Properties, an administrator has selected Enable unrestricted media sharing for all media servers. Because some of the media has already been assigned, what will happen to any media that is currently assigned to the media servers in the server group? A.The media will be shared after the current backup/duplication schedule window. B.The media will be shared between the media servers in the server group. C.The media will be unavailable for sharing. D.The media will be frozen until all images have expired. E.The media will be frozen and deassigned. Correct Answers: C Explanation: 3: The latest NetBackup Release Update has just been applied to a Microsoft Windows master server. Where can the administrator validate that it was installed successfully? A.install_path\NetBackup\bin\support\log\package B.install_path\Veritas\pack C.install_path\Veritas\package D.install_path\Veritas\Patch Correct Answers: D Explanation: 4: After attaching a new robot to a media server, the master server fails to recognize the robot in the device configuration wizard. Which command will manually add the robot? 23 A.tpautoconf -add -robot B.nbemmcmd -add -robot C.vmadd -add -robot D.tpconfig -add -robot Correct Answers: D Explanation: 5: Available disk space is low. What is the recommended location to install NetBackup server? A.CIFS share B.NFS-mounted directory C.a local/SAN file system D.UNC path Correct Answers: C Explanation: 6: Which command is used to list the media contents of a robot? A.vmcheck B.tpconfig C.vmoprcmd D.vmcheckxxx Correct Answers: D Explanation: 7: In which registry location will an administrator find tape device hardware configurations on a Windows media server? A.HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\Scsi B.HKEY_LOCAL_MACHINE\CurrentControlSet\HARDWARE\DEVICEMAP C.HKEY_LOCAL_MACHINE\CurrentControlSet\HARDWARE\DEVICEMAP\Scsi D.HKEY_LOCAL_MACHINE\HARDWARE\DEVICES\Scsi E.HKEY_LOCAL_MACHINE\HARDWARE\DEVICE\Scsi 24 Correct Answers: A Explanation: 8: An administrator is backing up to a disk storage unit, and the disk is full. How does the administrator specify a new disk backup location? A.modify the policy to point to a new disk volume for backups B.append a new volume location to the existing storage unit C.create a new disk storage unit to point to a new location and modify the policy D.set up automatic space allocatation for the disk group from media manager Correct Answers: C Explanation: 9: What initiates a LiveUpdate policy from the NetBackup Administration console? A.File -> LiveUpdate B.Actions -> LiveUpdate C.Policies -> Manual -> LiveUpdate D.Actions -> Policy -> LiveUpdate Correct Answers: A Explanation: 10: Which setting determines how many times a backup will retry? A.master server Host Properties -> Global Attributes -> Job retry delay B.master server Host Properties -> Universal Settings -> Job retry delay C.master server Host Properties -> Global Attributes -> Schedule backup attempts D.master server Host Properties -> Universal Settings -> Schedule backup attempts Correct Answers: C Explanation: 11: Which two must be verified when installing multiple media servers? (Select two.) A.License keys are available for all the new media servers. B.The master server has access to media server binaries. C.Root or Administrator access is available on the media servers. D.Media server license keys are available to the client. E.Tape drives are available and configured on the new media servers. A.AC 25 Correct Answers: Explanation: 12: Which command is used to launch the utility to perform NetBackup Operations Manager maintenance? A.NOMadmincmd B.NOMadmin C.NOMadmn D.NOMadm Correct Answers: B Explanation: 13: What is one of the functions of a SAN media server? A.It is the designated media server for SAN based clients. B.It is the designated media server for backups of SAN based devices. C.It is only able to back up locally attached SAN devices. D.It is only able to back up clients with SAN attached devices. Correct Answers: C Explanation: 14: Given an architecture with multiple NetBackup master servers and a remote EMM host, which bp.conf entry must exist on all master servers? A.EMMCLIENT B.EMMSERVER C.EMMHOST D.EMMMASTER Correct Answers: D Explanation: 15: In the NetBackup Administration console, where are user administration permissions specified? A.Master Server Properties -> Authorization B.Master Server Properties -> Roles 26 C.Master Server Properties -> Permissions D.Master Server Properties -> Access Correct Answers: A Explanation: 16: Which NetBackup 6.5 feature can be deselected during a Microsoft Windows 2003 media server custom installation? A.Veritas Snapshot Provider B.Veritas Vault Option C.Veritas OpenStorage Disk D.Veritas LiveUpdate Server Correct Answers: A Explanation: 17: Which three guidelines should be followed before conducting a NetBackup media server installation? (Select three.) A.Any other vendor backup software should be uninstalled. B.At least one tape drive should be available for backup operations. C.Network connectivity should be established between NetBackup hosts. D.It should be verified that the server's hardware and OS version are supported. E.Previous versions of NetBackup in a Windows environment should be removed. A.ACD Correct Answers: Explanation: 18: Which NetBackup service must be running on a Windows client to enable backup and recovery? A.NetBackup Backup Service B.NetBackup Core Service C.NetBackup Client Service D.NetBackup Authorization Service Correct Answers: B Explanation: 19: An administrator has just successfully installed a NetBackup 6.5 master server with a remote EMM host. In addition to bprd, bpjobd, and nbpem, which additional processes would be running on the master server? A.bpdbm, nbjm 27 B.bpdbm, nbemm C.bpbrm, nbjm D.bpbrm, nbemm Correct Answers: A Explanation: 20: Which two actions can be taken when performing a custom client installation on a Microsoft Windows 2003 system? (Select two.) A.deselect Veritas Snapshot Provider B.select to install remote EMM host C.configure storage devices D.set a custom location for the NetBackup catalog E.change the default port number A.AE Correct Answers: Explanation: 21: What is the function of the NetBackup Service Layer (nbsl) daemon? A.processes requests from NetBackup clients and servers B.supports legacy communication C.starts NetBackup services D.facilitates communication from NetBackup to NOM Correct Answers: D Explanation: 22: In a NetBackup 6.5 environment, where does the the image database reside? A.within the EMM database B.on the EMM server in binary format C.on the master server in binary format D.within the master server's Sybase database Correct Answers: C Explanation: 23: Which NetBackup 6.5 FlashBackup option in the Backup Policy is required for UNIX clients? A.specify the raw character device names 28 B.use the ALL_LOCAL_DRIVES directive C.enable Multiple data streams D.enable Retain Snapshot for Instant Recovery Correct Answers: A Explanation: 24: Which two factors affect the physical expiration of media? (Select two.) A.date B.media full C.number of mounts D.being moved to a new media server E.changing the backup retention level A.AC Correct Answers: Explanation: 25: Which two commands are used to view the contents of a robot and refresh the EMM database? (Select two.) A.vmcheck B.vmupdate C.vmchange D.vmupdatexxx E.vmcheckxxx A.BE Correct Answers: Explanation: 26: Which two methods can be used to identify which jobs are running? (Select two.) A.run bpclntcmd -active B.view the Activity Monitor C.run bpjobd -active D.view the Job Tracker Monitor E.run bpdbjobs -report A.BE Correct Answers: Explanation: 27: Which NetBackup report will provide the number of active, full, suspended, and frozen volumes on a given server? A.Tape List B.Media Logs C.Tape Written D.Tape Summary E.Volume Summary Correct Answers: D Explanation: 28: What must occur for any space to be re-used on a tape that has a FULL status and that contains multiple unexpired 29 backups? A.NetBackup can re-use any area of the media that contains expired data, but a catalog backup must occur first. B.The media must expire, or be manually expired, before space on the media can be used again. C.If the first image on the media becomes expired, NetBackup can write up until the first block of unexpired data. D.There must be at least one expired backup on the media and it must be the only available media in the pool. Correct Answers: B Explanation: 29: Consider the following: An environment has one master server and six SAN media servers. Shared Storage Option (SSO) is utilized to share ten tape drives on a single robot. Backups run at night to various media servers, and duplications must run during the day using Vault. All vault duplications must be performed by the master server to free up media server resources. What can be done to allow the master server to perform all duplications? A.disable "Drive Duplication" in the Device Manager for SAN media servers B.in the Vault policy, check the "Force Master Server Duplication" checkbox for SAN media servers C.set an offsite volume pool for master server access only D.set an alternate read server in the Vault Management Properties tab Correct Answers: D Explanation: 30: A restore must be performed. The administrator is trying to view the valid images for a client, but the following error occurs: WARNING: Server does not contain any valid images. Which three may be incorrectly configured? (Select three.) A.source client for restores B.destination client for restores C.server to use for backups and restores D.media server for restore E.policy types for restore A.ACE Correct Answers: Explanation: 31: Which two are listed in the Job Overview tab of backup jobs? (Select two.) A.master server B.EMM server C.busy file warnings D.MB/Sec E.policy type A.AE Correct Answers: Explanation: 32: In the NetBackup Administration console, where does an administrator determine how many mounts are left on a cleaning tape? 30 A.Reports -> Tape Report -> Cleaning Summary B.Media and Device Management -> Media C.Reports -> Tape Reports -> Tape Summary D.Media and Device Management -> Cleaning Wizard Correct Answers: B Explanation: 33: Which report physically reads the media to determine the backup images? A.Tape Inventory B.Tape Scan C.Tape Contents D.Tape Summary E.Images on Tape Correct Answers: C Explanation: 34: Which statement is true about the NetBackup Support Utility (NBSU)? A.NBSU provides information about the NetBackup configuration only; NBOS is required for OS and hardware information. B.NBSU runs checks on the Enterprise Media Manager (EMM) database to determine if there are inconsistencies. C.NBSU can be invoked from the console by selecting Help -> Gather support information. D.NBSU collects data on NetBackup as well as the operating system and hardware. Correct Answers: A Explanation: 35: When a restore is performed on a client, which client process is required? A.bpbkar B.bpcd C.bpbrm 31 D.bprestore Correct Answers: B Explanation: 36: NetBackup 6.5 is configured with a disk storage unit that has staging enabled. Some of the images in the disk storage unit have been successfully duplicated. The disk storage unit becomes full. What occurs next? A.The oldest images are automatically purged until enough space is available for the current fragment of the backup to complete. B.Duplicated images are automatically purged until the low water mark has been reached. C.Duplicated images are automatically purged until the high water mark has been reached. D.Images must be manually expired to free up space before the job can finish. Correct Answers: B Explanation: 37: When a restore is performed to a Windows client, which process will go active on a remote media server? A.bprd B.bpbrm C.bpbkar32 D.tar32 Correct Answers: B Explanation: 38: What must an administrator do to recycle NetBackup cold catalog media? A.short erase B.long erase C.relabel media D.expire media Correct Answers: C Explanation: 39: What is the maximum number of volumes for a cold (off-line) catalog backup on the Catalog Attributes tab? A.1 32 B.2 C.3 D.4 Correct Answers: B Explanation: 40: Which command is used to manage volume pools? A.nbemmcmd B.vmpool C.nbpool D.vmchange Correct Answers: B Explanation: 41: A NetBackup system administrator has been asked to configure a policy with multiple tape copies enabled. Where should this be done? A.from the Attributes tab, enable Allow multiple data streams B.from the Attributes tab, enable Multiple copies C.from the Schedules tab, add a new schedule and enable Multiple copies D.from the Schedules tab, enable Increase media multiplexing Correct Answers: C Explanation: 42: In addition to NetBackup and None, which two are default volume pools in NetBackup? (Select two.) A.Scratch B.CatalogBackup C.DataStore D.CatBackup E.Vault A.BC Correct Answers: Explanation: 43: What must be done to remove an AdvancedDisk pool from a media server? A.remove the disk volumes one at a time 33 B.remove the storage units that target the disk pool C.clear the high and low water marks D.clear the credentials from the storage server Correct Answers: B Explanation: 44: A new NetBackup client is installed that must communicate across a firewall to its master/media server. Which NetBackup process helps reduce the number of ports that must be opened in the firewall? A.vopied B.bpcd C.vnetd D.bpinetd Correct Answers: C Explanation: 45: Which two are required for a synthetic backup? (Select two.) A.Collect true image restore information B.Cross mount point C.Take checkpoints every D.With move detection E.Allow multiple data streams A.AD Correct Answers: Explanation: 46: Tapes are frozen because they were previously used by another application. Which parameter needs to be modified? A.Media servers host properties -> Allow media overwrite B.Master servers host properties -> Allow multiple retention per media C.Master servers host properties -> Allow foreign media D.Media servers host properties -> Allow multiple retention per media Correct Answers: A Explanation: 47: How should an administrator verify Windows tape device driver operation? A.run the scan command B.run vmoprcmd -listdrv 34 C.run robtest on the media server D.run tpconfig on the servers connected to the tape device Correct Answers: A Explanation: 48: What is the default number of days that a failed restore job can remain in an Incomplete state prior to being moved to a Done state? A.1 B.3 C.5 D.7 Correct Answers: D Explanation: 49: In order to use NetBackup LiveUpdate, the NetBackup client must be which version at a minimum? A.5.1 MP4 B.6.0 GA C.6.0 MP4 D.6.5 GA Correct Answers: D Explanation: 50: Which three options are used when configuring a frequency-based policy schedule? (Select three.) A.Minutes B.Hours C.Days D.Weeks E.Months A.BCD Correct Answers: Explanation: 51: How does an administrator limit administrative privileges for the NetBackup administrative console on a media server? A.add the media server name to the server list B.remove the media server from the server list and add the media server name to the media server list 35 C.add the media server name to the media server list and the media server name to the server list D.remove the media server name from both server lists Correct Answers: B Explanation: 52: Which three properties are defined in a tape storage unit? (Select three.) A.drive density B.media server C.drive path D.drive name E.drive multiplexing A.ABE Correct Answers: Explanation: 53: Which two have a media and/or density type? (Select two.) A.barcodes B.robots C.volume pools D.drives E.storage units A.DE Correct Answers: Explanation: 54: An administrator wants to use multiple disk destinations for backup. What is the recommended configuration for disk storage destinations in NetBackup using BasicDisk? A.a folder for each destination and a storage unit for each subdirectory B.a drive letter for each destination and a storage unit for drive letter C.a drive letter for each destination and a single storage unit D.a folder for each destination and a single storage unit Correct Answers: B Explanation: 55: Which command executes a hot-catalog backup policy? A.bpbackup B.nbdb_admin C.bpdbbackup D.bpbackupdb Correct Answers: D 36 Explanation: 56: Which two statements are true about data classifications? (Select two.) A.Data classifications are configured in Media Server Host Properties. B.The default data classifications are gold, silver, bronze, and copper. C.The data classification in a policy must match the data classification of a selected storage lifecycle. D.Data classifications are displayed by typing nbdc -L. E.Data classifications must be used when using storage lifecycles. A.CD Correct Answers: Explanation: 57: An administrator has enabled Multiple Data Streams for a Windows 2003 client policy. Which file list backs up all local volumes C:\, D:\, and E:\ and the system state using only three streams? A.NEW_STREAM SYSTEM_STATE NEW_STREAM D:\ NEW_STREAM E:\ B.NEW_STREAM C:\ NEW_STREAM D:\ NEW_STREAM E:\ C.NEW_STREAM ALL_LOCAL_DRIVES NEW_STREAM SYSTEM_STATE NEW_STREAM D.NEW_STREAM C:\ Shadow Copy Components:\ NEW_STREAM D:\ NEW_STREAM E:\ Correct Answers: D Explanation: 58: In which two places is media sharing enabled? (Select two.) A.in the Server Group configuration B.in the Volume Group configuration C.in the master server host properties under Media D.in the Volume Pool configuration E.in options for each individual media 37 A.AC Correct Answers: Explanation: 59: Which two must a storage lifecycle contain? (Select two.) A.at least one destination with a fixed retention type B.at least one data classification level C.at least one backup destination D.at least one tape device E.at least one disk staging unit A.AC Correct Answers: Explanation: 60: Which command can be used to configure tape drives and robotic devices? A.tpautoconfig B.tpconfig C.sgbuild D.sgscan Correct Answers: B Explanation: 61: Which three can be added to a server group? (Select three.) A.master server B.media server C.EMM server D.NDMP tape server E.NOM server A.ABD Correct Answers: Explanation: 62: When using the JAVA console, which file needs to be edited to allow someone other than root or administrator to administrate the NetBackup master server? A.bp.conf B.authjava.conf C.jnb.conf D.auth.conf Correct Answers: D Explanation: 38 63: Which statement is true about NetBackup LiveUpdate policies? A.LiveUpdate policies on a Windows master server can be configured to update UNIX clients. B.LiveUpdate policies can include clients at NetBackup version 6.0 or higher. C.LiveUpdate policies are specified by policy type NB-LiveUp. D.LiveUpdate policies can be scheduled. Correct Answers: A Explanation: 64: Which disk volume types are unsupported within a single AdvancedDisk pool? A.volumes from two separate disk enclosures B.volumes from two separate media servers C.volumes with different storage capacity D.volumes with different RAID levels Correct Answers: B Explanation: 65: Which delimiter should be used between email addresses to email a disaster recovery report to more than one recipient? A.period B.colon C.semi-colon D.comma Correct Answers: D Explanation: 66: Where in the NetBackup Administration console does the administrator create a disk location for backups? A.Attributes B.Storage C.Device groups 39 D.Disk Pools Correct Answers: B Explanation: 67: On a UNIX client, where does an administrator specify an exclude list for a schedule named full with a policy named unixclients? A./usr/openv/netbackup/exclude_list.full.unixclients B./usr/openv/netbackup/exclude_list.unixclients.full C./usr/openv/netbackup/client/exclude_list.full.unixclients D./usr/openv/netbackup/client/exclude_list.unixclients.full Correct Answers: B Explanation: 68: Given the following scenario about a policy with a single client: Allow Multiple Data Streams is enabled. ALL_LOCAL_DRIVES is specified. One tape drive is available in the storage unit. MPX for the storage unit is set to the default value. Max Jobs Per Client is set to 5. Media Multiplexing in the Schedule is set to 5. The client specified has five local file systems with no exclude list. How many backup jobs will be active (versus queued) after the policy successfully initiates? A.1 B.2 C.3 D.5 Correct Answers: A Explanation: 69: Given the following information about a policy with a single client: Allow Multiple Data Streams is enabled. ALL_LOCAL_DRIVES is specified. Media multiplexing is set to 3. Two tape drives are available in the storage unit, and MPX per drive is 2. Max Jobs per Client is set to 8. The client has five local file systems with no exclude list. How many backups will be active (versus queued) after the policy is successfully invoked? A.2 B.4 C.6 D.8 40 Correct Answers: B Explanation: 70: Which statement accurately describes the functionality of multiplexing? A.Multiplexing enables multiple backup jobs to be streamed simultaneously to the same robot. B.Multiplexing enables clients to send multiple data streams to a media server simultaneously. C.Multiplexing enables multiple backup streams to be written to the same media concurrently. D.Multiplexing enables interleaved data streams, thereby utilizing less space on media. Correct Answers: C Explanation: 71: Which two logs are used to determine the performance of a backup to a tape drive over the network? (Select two.) A.bprd B.bpcd C.bptm D.bpbkar E.bpdm A.CD Correct Answers: Explanation: 72: Which NetBackup process is responsible for reading and writing to a tape device? A.bpdm B.bptm C.ltidm D.bpbrm Correct Answers: A Explanation: 73: When performing a hot, online catalog backup, a job copies the NBDB files to which Windows directory? A.install_path\VERITAS\NetBackupDB\staging B.install_path\VERITAS\NetBackupDB\staging\temp C.install_path\VERITAS\NetBackupDB\DbExt\Catalog D.install_path\VERITAS\NetBackupDB\data Correct Answers: A Explanation: 41 74: What effect does Enable Robust logging have on logging? A.It enables log rotation for legacy logs. B.It enables enhanced verbose detail in logs. C.It enables logs when an error is encountered. D.It enables log size limits of unified logs. Correct Answers: A Explanation: 75: A job fails with Status Code 96: unable to allocate new media. What causes this error? (Select two.) A.The tape device is down. B.The robot is offline. C.The NetBackup pool has available media. D.The density of available media is invalid. E.The scratch pool is empty. A.DE Correct Answers: Explanation: 76: Which properties tab is used to change the log retention length? A.Retention Periods B.Clean-up C.Global Attributes D.General Settings E.Logging Correct Answers: B Explanation: 77: A network administrator sent an email stating that emergency maintenance was required during the night on the network used for backup traffic. Which status code indicates a job was affected by the network maintenance? A.Status Code 5 B.Status Code 11 C.Status Code 58 D.Status Code 150 42 Correct Answers: C Explanation: 78: The Master Server Catalog is being recovered to a new server, and the following error is seen: Please insert the following media and run the volume configuration wizard or the vmupdate command to update the NetBackup database. Host - train1 MediaID - GBP847 Barcode - GBP847S1 In NetBackup, Barcode GBP847S1 shows MediaID P847S1. What should be done? A.right-click MediaID GBP847 in the console and rename it to P847S1, then perform recovery B.use bplabel to change the MediaID GBP847 to P847S1, then perform recovery C.delete the tape in the console and set the Media ID generation rule accordingly, then re-inventory the library and run recovery D.delete the tape in the console and set the barcode rule accordingly, then re-inventory the library and run recovery Correct Answers: C Explanation: 79: A log indicates that a status 84 error occurred. Which two problems can be attributed to this code? (Select two.) A.unable to communicate with robot control host B.incorrect tape drive configuration C.defective or dirty drive D.specified volume pool empty E.span media disabled for storage unit A.BC Correct Answers: Explanation: 80: The command "nbemmcmd -getemmserver" on a new Windows based NetBackup 6.5 media server produces the error: "Failed to initialize EMM connection". Which two steps are used to diagnose the issue? (Select two.) A.run the command 'bpmedia -listhost' on the EMM server from the new Windows media server B.run "bpclntcmd -hn" command on the EMM server to confirm the master server was able to resolve its own hostname C.telnet from the master server to the media server's VNETD port D.verify that network access to the EMM server is available E.verify the nbemm and pbx_exchange daemons/services are running on the EMM server A.DE Correct Answers: Explanation: 81: NetBackup is unable to communicate with a Windows media server tape device after it has been configured. Which steps should be taken to troubleshoot this problem? A.check the Device Manager and verify the tape driver B.check the Device Manager and device configuration file C.check the Device Manager and driver.conf 43 D.check the Device Manager and the bpdm log Correct Answers: A Explanation: 82: The NetBackup master server is named hostA and has an IP address of 192.168.10.10. Which NetBackup command should an administrator run from a client to test reverse lookup? A.nslookup 192.168.10.10 B.bpclntcmd -hn hostA C.ipconfig /displaydns 192.168.10.10 D.bpclntcmd -ip 192.168.10.10 Correct Answers: D Explanation: 83: Which NetBackup tool is available to test a tape library? A.robtest B.tptest C.scan D.tpconfig Correct Answers: C Explanation: 84: A tape library has just had the robot firmware upgraded, and now the robot is reading the barcodes with additional characters. Which rule can be set so that NetBackup uses the same characters as before the firmware upgrade occurred? A.MediaID generation rule B.MediaID display rule C.Barcode rule D.Barcode generation rule Correct Answers: A Explanation: 85: An administrator has attempted a catalog backup that failed with Status Code 168: cannot overwrite media, data on it is protected. The administrator determines that this is the correct media and wants to overwrite it. What should the 44 administrator do? A.unlock the physical media write protect B.select ALLOW_MEDIA_OVERWRITE C.select ALLOW_MEDIA_OVERWRITE_ALL D.up the drive Correct Answers: B Explanation: 86: Which two commands are used for configuring and managing unified logging? (Select two.) A.vxlogcfg B.mklogdir C.vxlogconf D.vxlogmgr E.vxlogview F.mkdirlog A.AD Correct Answers: Explanation: 87: Which two options are available when running a hot, online catalog recovery through the Recover the Catalogs Wizard? (Select two.) A.recover entire NetBackup relational database B.recover entire NetBackup catalog C.recover only NetBackup relational database and image files D.recover only NetBackup relational database and configuration files E.recover only NetBackup catalog image and configuration files A.BE Correct Answers: Explanation: 88: Which two logs are useful to enable on a NetBackup client to troubleshoot backup issues? (Select two.) A.tar B.bpcd C.ssm D.bpbkar E.bpbrm A.BD Correct Answers: Explanation: 89: The NetBackup Startup/Shutdown scripts for Windows can be found in which directory? A.install_path\NetBackup\bin\admincmd B.install_path\NetBackup\bin C.install_path\NetBackup\bin\admincmd\support D.install_path\NetBackup\bin\goodies 45 Correct Answers: B Explanation: 90: A NetBackup administrator receives Status Code 41: network connection timed out for some backups of a client. Which parameter can be modified to help resolve this problem? A.BPCD_KEEPALIVE B.BPTM_WRITE_TIMEOUT C.CLIENT_READ_TIMEOUT D.CLIENT_BPSTART_TIMEOUT Correct Answers: D Explanation: 91: After successfully installing three UNIX clients, all backups for those clients fail with Status Code 59: access to the client was not allowed. What should the system administrator do to resolve this problem? A.make host file entries for all three UNIX clients on the master server B.add all three UNIX client names to the master server's vm.conf file C.verify that the media server is listed in the bp.conf file D.edit the .rhosts file on the client and add the master server name Correct Answers: C Explanation: 46