山推推土机与河北宣工推土机 山推

山推推土机与河北宣工推土机 山推 Tys165推土机性能简介 Tys165 bulldozer Tys165推土机系液力机械传动、液压操纵、低比压履带推土机.该机 性能优良, 操作灵活方便, 质量可靠, 工作效率高, 特别适合沼泽 地和含水量比较高的松软地带使用. Tys165 bulldozer is of power shift, hydraulically controlled and track type. It features good performance, flexible operation, good quality, high efficiency, especially used in waterlogged area. 主机性能参数 Main specifications 外形尺寸 (长×宽×高 5295×4000×3212.5 mm) 使用质量 17.5t 飞轮功率 121 kw 最大牵引力 120.1 kn (有效牵引力取决于机重和地面附着性能) 接地压力 (使用重量 27.7 kPa) 最小转弯半径 4.0 m 最小离地间隙 352.5 mm 坡行角度 纵向 30度 横向 25度 Overall dimensions (L × w × h): 5295×4000×2992 mm Operation weight: 17.5 t. Flywheel power: 121 kw Max: 12.1 kn drawbar pull. (the efficient force depends on weight and ground surface adherence) Ground pressure (at operating weight): 27.6kpa Min ground radium: 4.0 m. Min: 352.5 mm ground clearance. Grade ability: straight 30 side 25 柴油机 Diesel engine 制造厂家 上海柴油机股份有限公司 型号 c6121zg01a (引进卡特3306技术) 形式 水冷、单行、立式、四冲程、涡轮增压 缸数 - 缸径×行程 6 - 121×152 mm 总排量 10.5 L 标定功率 131 kw 额定转速 1900 R / min. 油耗 (标定功率时) 燃油消耗量 ?244 g / kw?h 机油消耗量 ?0.6 g / kw?h 最大扭矩 (?1400r / min) ?790 n ? M 冷却方式 闭式循环水冷却 启动方式 24v电启动 Manufactured factory, Shanghai Diesel Engine Co., Ltd. Model: c6121zg01a Type: water-cooled, single row, vertical, four stroke cycle turbo - charged Number of cylinders - bore×stroke: 6 - 121×152 mm Total piston displacement: 10.5 L Rated RPM: 1900 R / min. Rated power: 131 kw 油耗(额定功率输出) 油耗:?244克/千瓦?H 润滑油消耗量:0.6克/千瓦??H Max.矩(?1400转/分钟):?790 N?M 冷却方式:闭式循环水冷却 启动方式:电24V 变矩器与变速箱 液力变矩器和变速器 变矩器为单级三元件结构。扭矩由机械和液力两部分组合输出，输出动力平稳，具有良好性能。 变速箱为行星传动，动力换档变速箱。前进三档，后退三档。可实现挡位和方向的快速变换。 行驶速度:(按柴油机1900圈/分钟时理论速度) 前进一档0-3.6公里/小时后退一档0-4.3公里/小时 前进二档0-6.7公里/小时后退二档0-8.9公里/小时 前进三档0-12.4km/h后退三档0-14.9km/h 单级三联结构液力变矩器。机械和液压联合输出，性能稳定，性能稳定。 行星，动力换档变速箱，三速前进，三速倒车。速度和方向可以很快改变。 旅行速度(理论上1900圈/分钟转速) 正向反向 第一速度0-3.6公里/小时速度第一0-4.3公里/小时 第二速0-6.7公里/小时的速度0-8.9二公里/小时 第三0-12.40速度第三公里/小时的速度0-14.9公里/小时 转向与制动 转向和制动 转向离合器为湿式、多片、粉末冶金摩擦片、弹簧压紧、液压分离。 制动器为湿式、浮动、双向带式、脚踏式机械操纵，液压助力，可实现转向与制动联动 转向离合器采用压力弹簧紧固，液压分离，油型多金属圆盘。 刹车油，双向浮动带机构踏板，液压助力。转向和制动可以在一个控 制中驱动。 最终传动 最终传动 两级直齿轮减速，浮动油封密封，链轮采用组合式，便于维修。 最终传动采用直齿轮和分段链轮双减速，油封采用浮动油封，使用方 便。 行走系统 起落架系统 The walking frame is a channel steel plate welded with a rectangular cross section and a splayed beam type. The supporting wheel, the supporting sprocket and the guide wheel are provided with a floating seal with good sealing performance and long service life. The number of single side support wheel is unilateral, four sides and two sides Single side sprocket number two One side guide wheel number one Track type, triangle, cross section, wide width and combination type Track tightening type hydraulic tightening Pitch 203 mm Number of track plates (42 pieces per side) The width of the crawler plate is 1000 mm The track ground length is 2920 mm Sealing and lubricating track " The distance of the track, the number of tracks and the width of the track plate are the same as those of the ordinary tracks. Inner and outer beam of track roller frame are rectangular section "eight" frame.Track roller, carrier roller, idler are mounted with long life well sealed Duo-cone floating ring well sealed Duo-cone floating ring seal. Number of track rollers: Singe flange 4 Double flange 2 Number, of, carrier, roller, 2, on, each, side Number of idler (each side) 1 Track type: triangle, section, modular, type Track adjuster type: by hydraulically adjust Pitch: 203, mm Number of shoes (each side) 42 pieces Width of shoe 1000 mm Length, of, track, on, ground, 2920, mm Sealed and lubricated track The, pitch, numbers, and, width, of, track, shoes, are, the, same,, with, the, general, track. Working unit hydraulic system Implement hydraulic system The utility model is composed of an oil pump, a hydraulic oil tank, various valves, an oil cylinder, an oil filter and a pipeline. Oil pump type gear oil pump The pump flow rate is 190 L/min System pressure 11.76 MPa The single valve can realize cylinder lifting, closed, falling and floating. It, is, composed, of, implement, pump, hydraulic, tank, and, various, valves, cylinders, filters, and, lines Pump, model, gears, oil, pump System output 190L/min System pressure 11.76Mpa Single, valve, control:, it, can, complete, the, raise, hold, lower, and, float, of, the, blader, cylinder. Chassis hydraulic system Basic hydraulic system Oil pump type gear oil pump The pump flow rate is 135 L/min System pressure 2.35MPa Pump, type:, gear, oil, pump System output: 135 L/min System pressure: 2.35MPa Cab Cab Low noise, wide vision, adjustable driver's seat, and equipped with electric fans. The following cab is available for user selection 1. cab with air conditioner. 2. roll over protective canopy. 3. simple canopy. The, cab, with, adjustable, seat, low, noise, and, features, wide, visible, range,, and, contains, electrical, fan. The, different, kinds, of, cabs, as, follow, can, chosen:, be 1. Cab with air-conditioner 2., Cab, with, Rops, canopy 3. simple structure canopy. Filling capacity Service refill Filling part capacity (L) Water tank and diesel engine cooling water 60 Lubrication system for diesel engine oil 25 Torque converter, transmission box, rear axle transmission oil 95 Final transfer of oil (single side) 24 Working equipment hydraulic system oil 85 Diesel tank 230 Idler, idler sprocket, guide wheel oil (each) 0.35 Fill location Capacity (L) Radiator and diesel engine water: 60 Lubricating, system, of, diesel, engine, Oil:, 25 Torque, converter, Transmission, bevel, gear, case, Oil:, 95 Final drive (each side) Oil: 24 Implement hydraulic system Oil: 85 Fuel tank Oil: 230 Track, roller, carrier, roller, front, idler (each), Oil: 0.35 Main parameters of earth shovel Blade specifications Type (Blade type) straight blade (Straight) The blade width (Width) of 4000 mm The blade height (Height) 960 mm Maximum cutting depth (Max, digging, depth): 380mm Maximum lift height (Max., ground, clearance): 713mm The vertical inclination angle is Tilting angle: + 4 degrees Blade capacity (Blade capacity): 3.7m3