电脑开机后出现蓝屏代码全解析

电脑开机后出现蓝屏代码全解析 After the computer is switched on, the blue screen code is fully parsed 2010-01-22 15:56:38 Blue screen code complete analysis 0 0x0000 operation completed. 1 0x0001 incorrect function. The specified file cannot be found in the 2 0x0002 system. 3 0x0003 system cannot find the specified path. 4 0x0004 system cannot open file. 5 0x0005 deny access. 6 0x0006 invalid code. 7 0x0007 storage block has been destroyed. The 8 0x0008 storage space is insufficient to handle this instruction. 9 0x0009 storage block control block address is invalid. The 10 0x000a environment is incorrect. 11, 0x000b attempts to load a malformed program. 12 0x000c access code error. 13 0x000d data error. 14 0x000e storage space is not enough to complete this task. 15 0x000f system cannot find the specified disk drive. 16 0x0010 cannot remove directory. 16 0x0010 cannot remove directory. The 17 0x0011 system cannot move files to another disk drive. 18 0x0012 does not have any files. 19 0x0013 storage media to write protected state. The specified device cannot be found in the 20 0x0014 system. The 21 0x0015 device is not ready. The 22 0x0016 device is unable to recognize instructions. 23 0x0017 data error (cyclic, redundancy, check) The 24 0x0018 program issues a length error command. The 25 0x0019 disk drive cannot find a fixed sector or track on disk. 26 0x001a specified disk or disk cannot access. 27 0x001b disk drive cannot find required sector. The 28 0x001c printer has no paper. The 29 0x001d system cannot write data to the specified disk drive. The 30 0x001e system cannot read the specified device. 31 0x001f does not work on a device connected to the system. "0x0020 the process cannot access the file because it is being used by another process." Part of the 33 0x0021 file is locked and cannot be accessed now. The disk for the 34 0x0022 disk drive is incorrect. Please insert%2 (volume, serial, number:%3) into disk drive%1. 36 0x0024 opens too many shared files. 38 0x0026 arrives at the end of the file. The 39 0x0027 disk is full. 50 0x0032 does not support this network requirement. 51 0x0033 remote computer cannot be used. 52 0x0034 network name repetition. 53 0x0035 network path cannot be found. 54 0x0036 network busy. The "0x0037 the specified network resource or device is no longer available." 56, 0x0038, the, network, BIOS, command, limit, has, been, reached.,, 0x0039 network adapter card problems. 58 0x003a specified server cannot perform requested job. An unexpected error occurred on the 59 0x003b network. 60 0x003c remote adapter card not compatible. The 61 0x003d printer queue is full. The 62 0x003e server space cannot store the files waiting to be printed. 63 0x003f waiting for the print file has been deleted. 64 0x0040 specified network name cannot be used. 65 0x0041 deny access to the network. 65 0x0041 deny access to the network. 66 0x0042 network resource type error. 67 0x0043 network name cannot be found. 68 0x0044 exceeds the name limit of the zone computer network adapter card. 69 0x0045 exceeds the network BIOS job phase limit. The 70 0x0046 remote server has been paused or is starting. 71 0x0047 cannot connect to this remote computer at this time because the number of lines has reached an upper limit. 72 0x0048 specified printer or disk device has been suspended. The 80 0x0050 file already exists. 82 0x0052 cannot build directories or files. 83 0x0053 int 24 failed The storage body for handling this requirement cannot be used by 84 0x0054. The name of the 85 0x0055 proximal device is already in use. 86 0x0056 specified network password error. 87 0x0057 parameter error. 88 0x0058 network data write error. 89 0x0059 the system cannot perform any other travel at this time. 100 0x0064 cannot build other system semaphore. 101 0x0065 belongs to other travel specific semaphore. 102, 0x0066 semaphore is set and cannot be turned off. 103 0x0067 cannot specify semaphore. 104 0x0068 cannot request a dedicated semaphore at the turn off time. 104 0x0068 cannot request a dedicated semaphore at the turn off time. 105 0x0069 the previous ownership of this semaphore is over. 106 0x006a, insert the disk into%1. 107 0x006b the program has stopped because the alternate disk has not been inserted. The 108 0x006c disk is in use or locked. 109 0x006d pipe has been aborted. The 110 0x006e system cannot open the specified device or file. The 111 0x006f file name is too long. 112 0x0070 disk space is insufficient. 113 0x0071 does not have an internal file identifier available. The internal file identifier for the 114 0x0072 target is incorrect. 117 0x0075 the IOCTL call performed by the application is incorrect. 118 0x0076 write validation parameter value incorrect. The 119 0x0077 system does not support the required instructions. 120 0x0078 this function is valid only in Win32 mode. 121 0x0079 semaphore over time period. The data area of the 122 0x007a transmitting to the system call is too small. 123 0x007b file name, directory name or storage volume label syntax error. 124 0x007c system call level is incorrect. 125 0x007d disk is not set. 126 0x007e cannot find the specified module. 127 0x007f cannot find the specified program. 128 0x0080 has no sub itinerary available for waiting. 128 0x0080 has no sub itinerary available for waiting. 129 0x0081%1 this application cannot be in Win32 mode? Small onion? Br / > 130 0x0082 attempt to use a file handle to an open disk partition for an operation other than raw disk i/o. 131 0x0083 attempts to move the file pointer to the beginning of the file. 132 0x0084 cannot set the file pointer in the specified device or file. 133, 0x0085, join, or subst instructions cannot be used to contain previously bonded disk drives. 134 0x0086 attempts to combine disk drives using join or subst instructions. The 135 0x0087 attempts to replace the disk drive in which the join or subst command is used. The 136 0x0088 system attempts to remove the link relationship of an un connected disk drive. The 137 0x0089 system attempts to delete the replacement relation of the alternate disk drive. The 138 0x008a system attempts to combine the disk drive with the directory of the disk drive that has been combined. The 139 0x008b system attempts to replace the disk drive with the directory of the disk drive that has been replaced. The 140 0x008c system attempts to replace the disk drive with the directory of the disk drive that has been replaced. The 141 0x008d system attempts to subst the disk drive into a combined disk drive directory. The 142 0x008e system cannot execute join or subst at the moment. The 143 0x008f system cannot combine disk drives or replace directories under the same disk drive. 144 0x0090 this directory is not a subdirectory of the root directory. 145, the 0x0091 directory still has data. 146 0x0092 specifies the path that has been replaced. 147 0x0093 resources are insufficient to handle this instruction. 148 0x0094 specified path is not available at this time. 148 0x0094 specified path is not available at this time. 149 0x0095 attempts to combine or replace the disk drive directory, which has been replaced by the target. The 150 0x0096 config.sys file does not specify system trace information, or the trace function is canceled. 151 0x0097 specifies the incorrect number of semaphore events dosmuxsemwait. 152 0x0098 dosmuxsemwait did not execute; set too many semaphore. The 153 0x0099 dosmuxsemwait list is incorrect. 154 0x009a the length limit of the storage media index you entered. 155 0x009b cannot create any other threads. The 156 0x009c receive trip refuses to accept the signal. The 157 0x009d section has been abandoned and cannot be locked. The 158 0x009e section has been unlocked. The address of the 159 0x009f thread identifier is incorrect. The argument string of 160 0x00a0 passed to dosexecpgm is incorrect. 161 0x00a1 the specified path is incorrect. 162 0x00a2 signal wait processing. The 164 0x00a4 system cannot create threads. 167 0x00a7 cannot lock part of the file. The resources requested by 170 0x00aa are in use. The lock requirement for 173 0x00ad cancellation range is not obvious. The 174 0x00ae file system does not support automatic change lock type. 180 0x00b4 system found an incorrect section number. The 182 0x00b6 * system cannot execute%1. The 182 0x00b6 * system cannot execute%1. The 183 0x00b7 file already exists. The same file cannot be created. Flag error of 186 0x00ba transfer. 187 0x00bb specified system flag can not be found. The 188 0x00bc * system cannot execute%1. The 189 0x00bd * system cannot execute%1. The 190 0x00be * system cannot execute%1. 191 0x00bf cannot be in Win32 mode? Onion?%1?. The 192 0x00c0 * system cannot execute%1. 193 0x00c1%1 is not the right Win32 application. The 194 0x00c2 * system cannot execute%1. The 195 0x00c3 * system cannot execute%1. The 196 0x00c4 * system cannot execute this application. The 197 0x00c5 * system cannot execute this application at the moment. The 198 0x00c6 * system cannot execute%1. The 199 0x00c7 * system cannot execute this application. The section of the 200 0x00c8 program code must not be greater than or equal to 64kb. The 201 0x00c9 * system cannot execute%1. The 202 0x00ca * system cannot execute%1. The 203 0x00cb system cannot find the input environment option. \\r 205 0x00cd in the instruction subdirectory, there is no stroke, there is a signal handler. 206 0x00ce file name or extension is too long. 207 0x00cf ring 2 stack used. 207 0x00cf ring 2 stack used. 208 0x00d0 input generic file name * * or incorrect, or specify too many generic file name elements. The signal sent by 209 0x00d1 is not correct. 210 0x00d2 cannot set the signal handler. The 212 0x00d4 section is locked and cannot be reconfigured. 214 0x00d6 has too many dynamic linking modules attached to this program or dynamic link module. 215, 0x00d7, can\'\'t, nest, calls, to, loadmodule. 230, 0x00e6, the, pipe, state, is, invalid. 231 0x00e7 all pipe instances are busy. 232, 0x00e8, the, pipe, is, being, closed. The "0x00e9 no process is on the other end of the pipe." 234 0x00ea has more available information. The 240 0x00f0 operation phase was canceled. 254 0x00fe specified extension property name is invalid. 255 0x00ff extension attributes inconsistent. 259 0x0103 has no data available. 266 0x010a cannot use copy api. 267 0x010b directory name error. The 275 0x0113 extended attribute does not apply to buffers. The extended property file of 276 0x0114 on the plug-in file system has been corrupted. 277 0x0115 extended attribute table file full. 278 0x0116 specified extension property code is invalid. 278 0x0116 specified extension property code is invalid. This file system for 282 0x011a plug-in does not support extended attributes. 288 0x0120 intended to release mutex that does not belong to the user. 298, 0x012a, semaphore, excessive number of transfers. 299 0x012b only completes part of the read/writeprocessmemory requirement. The 317 0x013d system could not find the message located in message file% 2, numbered 0x%1. 487 0x01e7 attempts to access invalid addresses. The 534 0x0216 operation results in more than 32 bits. At the other end of the 535 0x0217 channel, there is a stroke in the shuttle data. 536 0x0218 waits for the route to open the other end of the channel. 994 0x03e2 access extended attribute denied. 995 0x03e3 terminates the i/o job unexpectedly because of the end of the thread or application requirements. The 996 0x03e4 overlapped i/o event is not set as notification status. 997 0x03e5 is processing overlapping i/o jobs. 998 0x03e6 invalid access to memory locations. 999 0x03e7 error executing inpage job. Contents that are logged in memory. The 10170 * 000003F9 system attempts to log in to the file loading system or restore the file to the system login, but the format of the specified file is not in the format of the system login file. 10180 x 000003FA attempts to log in on the system marked "delete" and perform an illegal operation. 10180 x 000003FA attempts to log in on the system marked "delete" and perform an illegal operation. The 10190 * 000003FB system cannot configure the space needed for the system login record. 10200 * 000003FC cannot establish symbolic links on the system login code that already has child code or values. 10210 * 000003FD cannot establish permanent sub machine code under temporary machine code. Notification of change request of 10220 * 000003FE is completed, but the message is not transmitted through caller's buffer. Callers now need to file their own files to find out where they changed. 10510 x 0000041B control has been transferred to other services in a service confrontation. The control required by 10520 * 0000041C is invalid for this service 10530 * 0000041DTheservicedidnotrespondtothestartorcontrolrequestinatimelyfashion.10540 * 0000041E cannot establish the thread of service. The 10550 * 0000041F service database is locked. 10560 * 00000420 of this service is already under way. 10570 * 00000421 account name error or not exist. 10580 x 00000422 specified service pause function cannot be activated. 10590 * 00000423 specifies the loop service affiliation. 10600 x 00000424 designated services are not installed services. 10610 * 00000425 the service item cannot receive control messages at this point. 10620 x 00000426 service is not active yet. 10630 x 00000427 cannot connect to the service control program. An unexpected condition occurs when 10640 * 00000428 handles control requirements. The 10650 * 00000429 specified database does not exist. The 10650 * 00000429 specified database does not exist. The 10660 x 0000042A service returns an error code belonging to the service. 10670 x 0000042BTheprocessterminatedunexpectedly. 10680 * 0000042C dependency service or group cannot be activated. 10690 * 0000042D failed to activate the service because the login failed. 10700 x 0000042E in the activation after the crash in active service. 10710 * 0000042F specified service database locked invalid. The 10720 * 00000430 designated service has been marked for deletion. The 10730 x 00000431 specified service already exists. The 10740 * 00000432 system is currently executing a successful configuration execution. 10750 * 00000433 secondary services do not exist or have been marked as deleted. The current activation of 10760 * 00000434 has been accepted for the last successful execution of the control settings. After 10770 x 00000435 activation, there is no activation service. The 10780 * 00000436 specified name is already used for the service name or service display name. 11000 x 0000044C has reached the end of the tape. 11010 x 0000044D to the file mark. 11020 x 0000044E encountered the beginning or division of the tape. 11030 x 0000044F to the end of the file group. 11040 x 00000450 tape without any information. 11050 * 00000451 tape cannot make segmentation. 11060 x 00000452 accessing a new volume of a volume, the current block size error is found. Tape partition information is not found when 11070 * 00000453 load the tape. 11080 x 00000454 unable to lock the storage media back band function. 11080 x 00000454 unable to lock the storage media back band function. 11090 x 00000455 cannot load the storage media. The storage media in the 11100 * 00000456 disk drive has been changed. 11110 * 00000457 has reset the I/O bus. 11120 x 00000458 disk drive without any storage media. 11130 x 00000459 target multi-bytecodepage, not corresponding to Unicode characters. 11140 * 0000045A dynamic link library (DLL) start routine failed. The 11150 x 0000045B system is shutting down. 11160 * 0000045C cannot stop system shutdown because no shutdown is in progress. 11170 * 0000045D failed to execute the request because of an error in the I/O device. The start of the 11180 x 0000045E sequence device failed to cancel the loading sequence driver. 11190 * 0000045F cannot open device. This device shares the interrupt request (IRQ) with other devices. At least one other device using the same IRQ has been turned on. 11200 x 00000460AserialI/Ooperationwascompletedbyanotherwritetotheserialport. (TheIOCTL_SERIAL_XOFF_COUNTERreachedzero.) 11210 * 00000461 because sequence time has passed, the sequence I/O job is completed. (IOCTL_SERIAL_XOFF_COUNTER is not zero. ) 11220 x 00000462 cannot find any ID address on disk. The 11230 * 00000463 disk sector ID field does not match the disk control card tracking address. The 11240 x 00000464 floppy drive control card returns an error that is not recognized by a floppy disk drive driver. The 11250 * 00000465 floppy drive control card returns inconsistent results in the cache. 11260 x 00000466 access hard disk failed and can not be done after retry. 11270 x 00000467 access hard disk failed and can not be done after retry. 11280 * 00000468 access to the hard disk, you must reset the disk control card, but even reset the action failed. 11290 x 00000469 to the end of the tape. 11300 x 0000046A is available and the server has insufficient storage space to handle this instruction. 11310 x 0000046B found potential deadlock conditions. 11320 * 0000046C specified base address or file displacement is not properly aligned. 11400 x 00000474 attempts to change the system power status, but other applications or drivers reject it. 11410 * 00000475 system BIOS cannot change the system power status. The 11500 x 0000047E specified program requires a new Windows version. The program specified by 11510 * 0000047F is not a Windows or MS-DOS program. The 11520 x 00000480 specified program has been activated and cannot be activated again. The 11530 x 00000481 specified program is written for the old version of Windows. 11540 x 00000482, one of the link library files required to perform this application is damaged. 11550 * 00000483 no application is associated with the specified file for this job. An error occurred in the 11560 * 00000484 transfer instruction to the application. 11570 * 00000485 cannot find the link library file required to execute this application. The name of the device specified in 12000 * 000004B0 is invalid. The 12010 x 000004B1 device is not online yet, but it is a memory online. 12020 x 000004B2 device to try to remember. The network path provided by 12030 * 000004B3 cannot find any network provider. The network path provided by 12030 * 000004B3 cannot find any network provider. 12040 * 000004B4 specified network provider name error. 12050 * 000004B5 cannot open network online settings file. 12060 x 000004B6 network online settings file broken. 12070 * 000004B7 cannot enumerate non containers. An extension error of 12080 * 000004B8. 12090 * 000004B9 specified group name error. 12100 * 000004BA specified computer name error. 12110 * 000004BB specified event name error. 12120 * 000004BC specified network name error. 12130 x 000004BD specified service name error. 12140 * 000004BE specified network name error. 12150 * 000004BF specified resource sharing name error. 12160 * 000004C0 specified password error. 12170 * 000004C1 specified message name error. 12180 * 000004C2 specified message destination error. The condition provided by 12190 * 000004C3 conflicts with the existing condition set. 12200 x 000004C4 attempts to connect to the web server, but there is too much online access to the server. 12210 * 000004C5 other network computers are already using this workgroup or domain name. The 12220 * 000004C6 network is not shown or activated. 12230 * 000004C7 users have cancelled their jobs. The job requested by 12240 * 000004C8 cannot be performed on the file that has opened the user's corresponding section. 12250 x 000004C9 remote system refuses to network online. 12250 x 000004C9 remote system refuses to network online. 12260 * 000004CA shutdown network on line. The 12270 * 000004CB network transmission endpoint already has an associated address. 12280 * 000004CC addresses have not yet been associated with network endpoints. 12290 * 000004CD attempts to work on a network that does not exist. 12300 * 000004CE performs invalid jobs on the network line in action. 12310 x 000004CF cannot be transferred to remote network. 12320 x 000004D0 cannot be connected to remote system. 12330 * 000004D1 remote system does not support transport protocol. The destination network endpoint of the 12340 * 000004D2 remote system does not perform service in execution. 12350 * 000004D3 requirements have been discontinued. The 12360 * 000004D4 terminal system has been interrupted and the network is online. 12370 * 000004D5 cannot complete the job. Please try again. 12380 x 000004D6 cannot connect to the server because this account has reached the upper bound on the number of simultaneous entries. 12390 x 000004D7 attempts to log on to the network at this unauthorized time of the account. 12400 * 000004D8 this account cannot log in from this network. 12410 * 000004D9 network address cannot be used for this requested job. 12420 x 000004DA service has been registered. The 12430 x 000004DB specified service does not exist. 12440 * 000004DC jobs cannot be performed because the user is not authorized to use them. The job requested by 12450 * 000004DD cannot be performed because the user has not logged on to the network. The specified service does not exist. 12460 x 000004DE returns the message that calls the caller to continue working. After 12470 * 000004DF, after completing the start job, try to start the job again. 12480 x 000004E0, no other near end device. 13000 * 00000514 does not specify all reference rights to callers. There is still no completed online between the 13010 * 00000515 account name and the security identifier. 13020 * 00000516 this account does not have a special system quota limit. 13030 * 00000517 has no encryption code available. Returns a known cryptographic code. The 13040 * 00000518NT password is too complex to be converted to a LANManager password. The returned LANManager password is an empty string. 13050 x 00000519 revision level unknown. 13060 * 0000051A indicates incompatibility between the two revision classes. 13070 * 0000051B this security identifier cannot be specified as the owner of this object. 13080 * 0000051C this security identifier cannot be specified as the primary object group. 13090 x 0000051DAnattempthasbeenmadetooperateonanimpersonationtokenbyathreadthatisnotcurrentlyimpersonatingaclient. 13100 * 0000051E cannot close the group. 13110 * 0000051F currently has no logon server, so it cannot handle logon requests. 13120 * 00000520 specified logon operation phase does not exist. The job phase may already be over. 13130 x 00000521 specified permissions do not exist. 13130 x 00000521 specified permissions do not exist. The 13140 * 00000522 client does not list required permissions. The name format provided by 13150 * 00000523 does not correspond to the account name. The 13160 x 00000524 specified user already exists. 13170 x 00000525 specified user does not exist. A 13180 * 00000526 designated group already exists. 13190 * 00000527 designated groups are not saved. The 13200 * 00000528 specified user account is already a member of the specified group, or the specified group cannot be deleted because of the inclusion of members. The 13210 * 00000529 specified user account is not a specified group account member. The management account that was left last time by 13220 * 0000052A cannot be closed or deleted. 13230 x 0000052B cannot update password. The password entered is incorrect. 13240 x 0000052C cannot update password. The new password entered does not conform to the password requirement. 13250 x 0000052D cannot update password because it violates password update rules. 13260 * 0000052E logon failed: unrecognized user name or password error. 13270 * 0000052F logon failed: user account restriction. 13280 * 00000530 logon failure: violation of account logon time limit. 13290 * 00000531 logon failed: the user is not allowed to log in to this computer. 13300 * 00000532 logon failed: the specified account password expired. 13310 * 00000533 logon failed: account is currently invalid. The 13320 * 00000534 account name does not correspond with the account identification number. 13330 x 00000535 requires too many user identification codes (localuseridentifiers, LUIDs) at one time. 13330 x 00000535 requires too many user identification codes (localuseridentifiers, LUIDs) at one time. 13340 x 00000536 does not have a near - end user identifier (localuseridentifiers, LUIDs). The authorization portion of the 13350 * 00000537 security identification code is invalid for this particular usage. 13360 * 00000538 invalid access control list structure. 13370 * 00000539 security identification code structure is invalid. The 13380 * 0000053A security statement substructure is invalid. 13400 * 0000053C cannot establish an inherited access control list or access control entry. The 13410 x 0000053D server is currently invalid. 13420 x 0000053E server is currently available. The value provided by 13430 * 0000053F is invalid identifier authorization value. 13440 * 00000540 has no memory available for security information updates. The 13450 * 00000541 specified attribute is invalid, or the specified attribute is associated with the entire group