FN3042 Load Cell for Fatigue Testing
X
FN3042-Rev1 www.sensorway.cn 2010-04-01
1/4
• Pan Cake load cell
• Full Scale Range : from 5 to 500 kN (1 to 100 kLbf)
• Tension and Compression
• Suited for fatigue testing
• High Level Output Model with Integrated Amplifier
DESCRIPTION
The FN3042 is highly suited for use in test benches and fatigue tests. Due to the mechanical design, the
FN3042 is especially durable. It measures tension and compression in standard ranges from 0-5 kN to
0-500 kN and is able to undergo more than 1000000 cycles of full scale with very little change in zero offset
stability.
With many years of experience as a designer and manufacturer of sensors, Measurement-Specialties
often works with customers to design or customize sensors for specific uses and testing environments.
To meet your needs we also offer complete turnkey systems. The matched components (sensor, power,
amplifier and digital display) are formatted, calibrated and ready for immediate use.
FEATURES APPLICATIONS
• Full Scale Range : from 0-5 kN to 0-500 kN
(0-1 kLbf to 0-100 kLbf) • Process control equipment
• Tension and Compression • Weighing calibration tool
• Accuracy: 0.25% F.S. • Dynamic fatigue tests
• Skydrol compatible on request • Aerospace test bed
• High Level Output Model with Integrated
Amplifier • Robotics and effectors
• Laboratory and Research
STANDARD RANGES
F.S. Ranges in N 5K 10K 25K 50K 100K 200K 500K
F.S. Ranges in Lbf 1K 2K 5K 10K 20K 40K 100K
Stiffness in N/m 1.7x108 3x108 6x108 1.5x109 2x109 3.5x109 6.5x109
Stiffness in Lbf/ft 1.2x107 2.1x107 4.1x107 1.0x108 1.4x108 2.4x108 4.5x108
Material Aluminum Stainless steel
FN3042 Load Cell for Fatigue Testing
X
FN3042-Rev1 2010-04-01
2/4
PERFORMANCE SPECIFICATIONS
Ambient Temperature: 20±1ºC (unless otherwise specified)
PARAMETERS
Operating Temperature Range (OTR) -20 to 80 °C [-4 to 176 °F]
Compensated Temperature Range (CTR) 0 to 60 °C [32 to 140 °F]
Zero Shift in CTR <0.5% F.S. / 50°C [100 °F]
Sensitivity Shift in CTR <2.10-4 / °C of reading [<1.10 -4 / °F of reading]
Range (F.S.) 0-5 kN to 0-500 kN [0-1 klbf to 0-100 klbf]
Over-Range
Without Damage 2 x F.S.
Without Destruction 3 x F.S.
Accuracy
Combined Non-Linearity & Hysteresis ±0.25% F.S.
Electrical Characteristics
Model FN3042 FN3042-A1 FN3042-A2
Supply Outage 10V 10–30Vdc ±15Vdc (±12 to ±18Vdc)
F.S. Output ±1.5mV/V 0.5 to 4.5V ±5V
Zero Offset <±5% F.S. 2.5V ±5% F.S. 0V ±5% F.S.
Input Impedance/Consumption 350 to 700Ω <50mA <50mA
Output Impedance 350 to 700Ω <10Ω <10Ω
Insulation under 50Vdc ≥100MΩ ≥100MΩ ≥100MΩ
Notes
1. Electrical Termination: Connector output including mate
2. Materials: Body in stainless steel or aluminium alloy depending on F.S.; aluminum alloy cover
www.sensorway.cn
FN3042 Load Cell for Fatigue Testing
X
FN3042-Rev1 2010-04-01
3/4
Dimensions in mm [inch]
DIMENSIONS & WIRING SCHEMATIC (IN METRIC AND IMPERIAL)
F.S. Ranges in N
[Lbf]
5K
[1K]
10K
[2K]
25K
[5K]
50K
[10K]
100K
[20K]
200K
[40K]
500K
[100K]
A 30 [1.18] 30 [1.18] 30 [1.18] 40 [1.57] 50 [1.97] 50 [1.97] 70 [2.76]
B 101 [3.98] 101 [3.98] 101 [3.98] 119 [4.69] 144 [5.67] 168 [6.61] 228 [8.98]
C (Thread) M16 x 2 M20 x 1.5 M20 x 1.5 M24 x 2 M36 x 3 M45 x 4 M64 x 4
D 34 [1.34] 34 [1.34] 34 [1.34] 49 [1.93] 66 [2.60] 72 [2.83] 102 [4.02]
E 70 [2.76] 70 [2.76] 70 [2.76] 83 [3.27] 104 [4.09] 118 [4.65] 152 [5.98]
F 8 x 8.2 [0.32] 8 x 8.2 [0.32] 8 x 8.2 [0.32]
8 x 10.2
[0.40] 8 x 12.2 [0.48] 8 x 16.2 [0.64] 16 x 20.2 [0.8]
G 85 [3.35] 85 [3.35] 85 [3.35] 101 [3.98] 124 [4.88] 143 [5.63] 190 [7.48]
Material Aluminum Stainless steel
Wiring Schematic
FN3042
FN3042-A1
FN3042-A2
www.sensorway.cn
FN3042 Load Cell for Fatigue Testing
X
FN3042-Rev1 2010-04-01
4/4
OPTIONS
A1 : Unipolar Tension
A2 : Bipolar Tension
ET1 : CTR -20 to 100 ºC [-4 to 212 °F] OTR = CTR
ET2 : CTR -40 to 120 ºC [-40 to 248 °F] OTR = CTR
ET3 : CTR -40 to 150 ºC [-40 to 302 °F] OTR = CTR ( Note : ET3 not available with A1 and A2 options)
PE : Cable Gland Termination with 2 m [6.5 ft] cable
PE/LC“x”: Additional cable length to standard length (in m) with PE option (Note : “X” = Custom value)
ORDERING INFO
NORTH AMERICA EUROPE ASIA
Measurement Specialties
45738 Northport Loop West
Fremont, CA 94538
USA
Tel: 1-800-767-1888
Fax: 1-510-498-1578
Sales: pfg.cs.amer@meas-spec.com
Measurement Specialties
(Europe), Ltd.
26 Rue des Dames
78340 Les Clayes-sous-Bois,
France
Tel: +33 (0) 130 79 33 00
Fax: +33 (0) 134 81 03 59
Sales: pfg.cs.emea@meas-spec.com
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not
convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to
any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement
Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or
incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts.
Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others.
北京赛斯维测控技术有限公司
北京市朝阳区望京西路48号
电话:+86 010 8477 5646
传真:+86 010 5894 9029
邮箱:sales@sensorway.cn
http://www.sensorway.cn
www.sensorway.cn
金隅国际C座1002