插头安规
Appendix 1
Error! Reference source
not found.
page 1 of 1
(澳规)Australia integrated plug according to AS/NZS 3112:2000 for AU type
2.8 TABLE: Australia plug dimension according to AS 3112 figure 2.1 C & E P
Part
No.
Dimensions Limi...
Appendix 1
Error! Reference source
not found.
page 1 of 1
(澳规)Australia integrated plug according to AS/NZS 3112:2000 for AU type
2.8 TABLE: Australia plug dimension according to AS 3112 figure 2.1 C & E P
Part
No.
Dimensions Limit Measured Pass/Fail
Distance from projection part edge to L and N pins 9mm min.
A Width of live pin 6.35 ± 0.15mm
Thick of live pin metal part 1.58 to 1.78mm C
Thick of live pin insulated part 1.58 to 1.78mm
D Pin center to plug center 7.92mm
F Length of live pin 17.06 ± 0.4mm
F Length of live pin insulated part 8.7 ± 0.5mm
G Length of plug base >27.0mm or
<21.9mm
H Length of plug base >27.0mm or
<21.9mm
I Length of plug base >27.0mm or
<21.9mm
G H
I
J
Appendix 1
Error! Reference source
not found.
page 2 of 2
(澳规)Australia integrated plug according to AS/NZS 3112:2000 for AU type
J Length of plug base >27.0mm or
<21.9mm
Radial of plug projection part R 21mm max.
Height of plug projection part 8.6mm min.
Note:
*1) the detachable integrated plug is installed in the AC/DC adapter during the measurement.
Appendix 2
Error! Reference source
not found.
page 1 of 1
(英规)British integrated plug according to BS 1363 for UK type
12. TABLE: BSI plug dimension according to BS 1363 figure 4 P
Part
No.
Dimensions Limit Measured Pass/Fail
Distance from projection part edge to L and N
pins
R9.5mm min.
A Width of live pin 6.22 to 6.48mm
B Width of ground pin 7.8 to 8.05mm
C Length of live pin 17.2 to 18.2mm
D Length of ground pin 22.23 to
23.23mm
E Thickness of live pin 3.9 to 4.05mm
Appendix 2
Error! Reference source
not found.
page 2 of 2
(英规)British integrated plug according to BS 1363 for UK type
F Thickness of ground pin 3.9 to 4.05mm
G Length of live pin except metal part 9.5mm max.
H Length of live pin except insulated part 9.2mm max
I Width of pin end chamfer 1.2 to 2.0mm
J Length of pin end chamfer 1.35 to 1.85mm
K Length between live pin to ground pin 22.1 to 22.36mm
L Length between live pin to ground pin 11.05 to
11.18mm
M Length of plug base 25.37mm max.
N Length of plug base edge to live pin 34.6mm max.
O Height of plug base 6.35mm min.
Appendix 3
Error! Reference source
not found.
page 1 of 1
(欧规)European integrated plug according to EN 50075 for EU type
7 Dimensions
Plugs shall comply with Standard Sheet 1
Between two pins (pin base) 18.0-19.2mm
Between two pins (pin top) 17.0-18.0mm
Diameter of pin (metallic part) 4± 0.06mm
Diameter of pin (pin base) max. 4.0mm
Diameter of pin (middle part) max. 3.8mm
Pin length 19± 0.5mm
Length of pin except metal part 10+ 1.0mm
Appendix 3
Error! Reference source
not found.
page 2 of 2
(欧规)European integrated plug according to EN 50075 for EU type
Shape of pin top Chamfered or
round
Round shape P
Length of plug base 35.3± 0.7mm
Width of plug base 13.7± 0.7mm
Diagonal dimension of plug base 26.1± 0.5mm
Height of plug projection part 18-0.0mm
Appendix 4
page 1 of 1
(中国规)China integrated plug according to GB-1002 for CN type
3 TABLE: China plug dimension according to GB1002 figure 1 P
Part
No.
Dimensions Limit Measured Pass/Fail
Distance from projection part edge to L and N pins 6.5mm min.
b Width of live pin 6.4-0.22 mm
t Thickness of live pin 1.5-0.15 mm
e1 Length of live pin 16 ± 0.35mm
Pin center to pin center 12.7± 0.135mm
Note:
*1) the detachable integrated plug is installed in the AC/DC adapter during the measurement.
Appendix 5
page 1 of 1
Argentina integrated plug according to IRAM 2063 for AR type
Pin dimension and marking requirements:
Location Requirement Measured Verdict
Marking of neutral with N N
Distance from edge to L and N pins min. 8 mm mm
Distance between pin center 13.72±0.1 mm mm
Appendix 5
page 2 of 2
Argentina integrated plug according to IRAM 2063 for AR type
Pin length 18.2±0.2 mm mm
Pin width 6.25±0.1 mm mm
Pin thickness 1.55±0.07 mm mm
Pin center to plug center 7.92±0.1 mm mm
One half distance of pin center to pin
center
6.86±0.1 mm mm
Pin angle 120°±5´
Ending of the contact pins be rounded Fig. 1a or 1b
Appendix 6
page 1 of 1
Korea integrated plug according to KSC 8305 for KR type
TABLE: Korea plug dimension according to KSC8305
A Radius R5+1mm
D Between two pins 19±0.2mm
H Diameter of pin (metallic part) 4.8± 0.06mm
F Diameter of pin (pin base) 4.6±0.2mm
G Diameter of pin (middle part) 4.3mm
I Pin length 19± 0.5mm
J Length of pin except metal part 10+ 1.0mm
Shape of pin top Chamfered or
round
Round shape P
A
B
C
D
E
F
G
H
I J
K
Appendix 6
page 2 of 2
Korea integrated plug according to KSC 8305 for KR type
C Length of plug base 35.3± 0.7mm
E Width of plug base 13.7± 0.7mm
B Diagonal dimension of plug base 26.1± 0.5mm
K Height of plug projection part 4mm min.
Appendix 7
page 1 of 1
(美规)North American integrated plug according to NEMA 1-15 P for US type
1.5.2 TABLE: US plug dimension according to NEMA 1-15P (non polarity) P
Part
No.
Dimensions Limit (mm) Measured (mm) Pass/Fail
A Thickness of live pin 1.40-1.65
B Width of live pin 6.10-6.60
C Distance between two live pins (centre) 12.70±0.127
D Distance between hole and plug face (if
hole used)
13.77±0.127
E Outer diameter of hole (if hole used) 3.96±0.127
F Inner diameter of hole (if hole used) 3.18±0.127
H Length of live pins 15.88-18.24
本文档为【插头安规】,请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑,
图片更改请在作品中右键图片并更换,文字修改请直接点击文字进行修改,也可以新增和删除文档中的内容。
[版权声明] 本站所有资料为用户分享产生,若发现您的权利被侵害,请联系客服邮件isharekefu@iask.cn,我们尽快处理。
本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用。
网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。