欧讯对讲机 基本的写频步骤
基本的写频步骤
1. 根据配置说明为机子选择匹配的写频软件。
Choose the matching programming software for your transceiver according to the configuration instruction.
2. 如果使用USB写频线,请根据使用的电脑操作系统版本来选择合适的USB
驱动。
2. If using the USB programming cable, pls choose the matching USB driver according to your personal computer operating system version. 3. 安装USB驱动程序。
Install the USB driver.
4. 通过电脑的设备管理器来调节端口,并为软件选择合适的端口。
Determine the port assignment from the device manager of the computer and select the correct communication port.
5. 解压下载的写频软件,并找到软件的应用程序,打开写频软件。
Open the programming software.
1. 同时,用写频线连接电脑和对讲机,机子开机。
Connect the radio to PC via the cable, turn on the radio at the same time. 2. 从机子读出数据。
Read the data from the radio.
9. 设置想要的参数,写入。
Set the desired parameter, and write the data to the radio.