教大家用碗莲种藕种植的方法

教大家用碗莲种藕种植的方法 教大家用碗莲种藕种植的方法(付详细图片讲解) 等待了漫长的寒冬碗莲的种藕终于可以种了 很多朋友都淘到了自己喜爱的碗莲品种 但是用种藕怎么种植呢, 自己的种藕会不会因为自己没有种植的经验 而死翘翘呢, 大多数朋友都很担心 为了解除大家的疑虑 我把种植的方法用照片给大家讲解一下 请大家多多支持呀 如果觉得有帮助 请帮我顶顶哦 也给其他朋友多一个了解的机会～ 首先 准备花盆一个 直径在,,厘米以上 可以稍微大点 对于初种碗莲的朋友来说 容易开花 太小了就只能欣赏叶子了 准备好淤泥 池塘里可以找到 淤泥拿回家来不能直接使用 因为有大量的微生物 容易腐蚀藕根 所以要进行土壤处理 土壤处理方法一 把多菌灵撒在捞回来的淤泥或者配置好的泥土上搅拌均匀 土壤处理方法二 用多菌灵 比例:,g兑,,,的水 直接浇灌到土里 让水与泥土融合 然后晒干 用量与多菌灵的有效成分来有关 如果泥土本生含水量大可以适当增加用量 多菌灵是底毒的 对植物没有伤害如果第一次掌握不好用量 放多了也没有关系 图片: 杀菌处理完土壤以后可以加几颗长效奥绿肥作为基肥 (如果有腐熟的鸡鸭粪也可以用来做基肥，但是也要注意消毒处理) 下图是我为了让大家看的仔细 用了一个大盆来装的淤泥 深度明显不够 只能给大家看怎么种的 solution should properly save, avoid for water evaporation and makes solution concentration occurred changes; some enough stable, as see light easy decomposition of AgNO3 and KMnO4, standard solution should storage Yu Brown bottle in the, and placed dark save; can absorption air in the carbon dioxide and on glass has corrosion role of alkali solution, best loaded in plastic bottle in the, and in bottle at loaded a alkali lime tube, to absorption air in the of carbon dioxide and water. Standard solution for unstable, long back, also recalibrated their concentration before use. Chapter III microbiological base (intermediate) first aseptic sampling techniques the unit about the aseptic sampling operation, before discussing the cause of aseptic sampling and collection methods, it is necessary to understand the "sterile" of the term, "sterile" is generally used in sampling, means that the sampling process, avoid the pollution caused by the operation. A sterile sample collection should be adopted in such a way, that is: in the process of collecting, should avoid contamination, then placed into a sterile container. Sterile sample collection is intended to support, against the plant sanitation status of the inspection findings. First, getting ready for a test: 1. packaging aseptic sampling of tools: having the right product or process of aseptic sampling device tools is essential. Unless you use the acquisition tools, otherwise the integrity of samples was suspected, samples even meaningless. In order to avoid without a proper sampling tools, recommended the establishment of a sterile sample analysis list to collect sampling tool. Container holdingin chemical experiments, standard solution mol • L-1 and its concentration. Preparation of standard solution of two major direct method and indirect method. 1. direct method weigh accurately reference material, dissolution constant volume after it becomes an accurate concentration of the standard solution. For example, required the preparation of 500mL concentration of 0.01000 mol • L-1 K2Cr2O7 solution, should weigh accurately on an analytical balance reference material K2Cr2O7 1.4709g, plus a small amount of water to make it dissolve quantitatively transferred to a 500mL bottle, diluted with water to scale. Dilute standard solution by dilution of concentrated standard solution. For example, spectrophotometric analysis needs 1.79x10-3mol • L-1 standard solution. Calculations that must weigh accurately 10mg pure iron, but not on the General analytical balance accurate weighing, weighing errors due to its too small and large. Reserves so often used to prepare standard solutions and Diluted to the required concentration of the standard solution. On the analytical balance accurate weighing of high purity (99.99%) iron 1.0000g, then joined in a small beaker approximately 30mL in concentrated hydrochloric acid to dissolve quantitatively transferred to one liter volumetric flask with 1mol • L-1 hydrochloric acid diluted to scale. This standard solution containing iron 1.79x10-2mol • L-1。 Standard solution 10.00mL 100mL remove this volumetric flask with 1mol • L-1 hydrochloric acid diluted to scale, shake the 1.79x10-3mol standard solution containing iron • L-1。 图片: ,上面的是藕尾,有小小的藕孔。下面的是藕芽，芽已经长出好长了，还长了一点点的须根。 图片: ,这样放藕尾会向下,容易导致进水,所以要反一面(左手拿的部分是藕尾，右手是藕芽) 图片: 3这样藕尾向上才正确,不用管芽的方向,它会自己调整生长位置的,主要控制藕尾,不使藕尾进水。 图片: 4挖个坑,把藕埋进去(限于淤泥晒的比较干，水多的话就直接插进去就可以了，理论上是20度角,根据实际 情况来定,因为藕不可能全部都长这个样子，也有其它形的，关键是把藕尾露在外面.注意保护藕芽)把藕尾 露出来。 solution should properly save, avoid for water evaporation and makes solution concentration occurred changes; some enough stable, as see light easy decomposition of AgNO3 and KMnO4, standard solution should storage Yu Brown bottle in the, and placed dark save; can absorption air in the carbon dioxide and on glass has corrosion role of alkali solution, best loaded in plastic bottle in the, and in bottle at loaded a alkali lime tube, to absorption air in the of carbon dioxide and water. Standard solution for unstable, long back, also recalibrated their concentration before use. Chapter III microbiological base (intermediate) first aseptic sampling techniques the unit about the aseptic sampling operation, before discussing the cause of aseptic sampling and collection methods, it is necessary to understand the "sterile" of the term, "sterile" is generally used in sampling, means that the sampling process, avoid the pollution caused by the operation. A sterile sample collection should be adopted in such a way, that is: in the process of collecting, should avoid contamination, then placed into a sterile container. Sterile sample collection is intended to support, against the plant sanitation status of the inspection findings. First, getting ready for a test: 1. packaging aseptic sampling of tools: having the right product or process of aseptic sampling device tools is essential. Unless you use the acquisition tools, otherwise the integrity of samples was suspected, samples even meaningless. In order to avoid without a proper sampling tools, recommended the establishment of a sterile sample analysis list to collect sampling tool. Container holdingin chemical experiments, standard solution mol • L-1 and its concentration. Preparation of standard solution of two major direct method and indirect method. 1. direct method weigh accurately reference material, dissolution constant volume after it becomes an accurate concentration of the standard solution. For example, required the preparation of 500mL concentration of 0.01000 mol • L-1 K2Cr2O7 solution, should weigh accurately on an analytical balance reference material K2Cr2O7 1.4709g, plus a small amount of water to make it dissolve quantitatively transferred to a 500mL bottle, diluted with water to scale. Dilute standard solution by dilution of concentrated standard solution. For example, spectrophotometric analysis needs 1.79x10-3mol • L-1 standard solution. Calculations that must weigh accurately 10mg pure iron, but not on the General analytical balance accurate weighing, weighing errors due to its too small and large. Reserves so often used to prepare standard solutions and Diluted to the required concentration of the standard solution. On the analytical balance accurate weighing of high purity (99.99%) iron 1.0000g, then joined in a small beaker approximately 30mL in concentrated hydrochloric acid to dissolve quantitatively transferred to one liter volumetric flask with 1mol • L-1 hydrochloric acid diluted to scale. This standard solution containing iron 1.79x10-2mol • L-1。 Standard solution 10.00mL 100mL remove this volumetric flask with 1mol • L-1 hydrochloric acid diluted to scale, shake the 1.79x10-3mol standard solution containing iron • L-1。 图片: 5用淤泥把整个藕包裹起来,如果芽短,可以一起埋进土里,不影响生长. 图片: 6一定一定要露出藕尾,不用浇水,放置太阳下面晒几天,直到土微微干,有一点点开裂,保证藕与泥土完全融合. 图片: 7等土稍微干了，就可以适当加点水滋润一下泥土，这时候，藕吸收水份特别的好～完全和淤泥融合。可 以加少量的氮肥和磷钾肥。这个是我种的另外一盆，直径大概有65厘米，里面我种了两个品种，一个红艳 三百重，一个冰骄。 图片: 8藕尾要露在水面上,现在藕抵抗力还不是很强,所以还不能把水淹过藕。 solution should properly save, avoid for water evaporation and makes solution concentration occurred changes; some enough stable, as see light easy decomposition of AgNO3 and KMnO4, standard solution should storage Yu Brown bottle in the, and placed dark save; can absorption air in the carbon dioxide and on glass has corrosion role of alkali solution, best loaded in plastic bottle in the, and in bottle at loaded a alkali lime tube, to absorption air in the of carbon dioxide and water. Standard solution for unstable, long back, also recalibrated their concentration before use. Chapter III microbiological base (intermediate) first aseptic sampling techniques the unit about the aseptic sampling operation, before discussing the cause of aseptic sampling and collection methods, it is necessary to understand the "sterile" of the term, "sterile" is generally used in sampling, means that the sampling process, avoid the pollution caused by the operation. A sterile sample collection should be adopted in such a way, that is: in the process of collecting, should avoid contamination, then placed into a sterile container. Sterile sample collection is intended to support, against the plant sanitation status of the inspection findings. First, getting ready for a test: 1. packaging aseptic sampling of tools: having the right product or process of aseptic sampling device tools is essential. Unless you use the acquisition tools, otherwise the integrity of samples was suspected, samples even meaningless. In order to avoid without a proper sampling tools, recommended the establishment of a sterile sample analysis list to collect sampling tool. Container holdingin chemical experiments, standard solution mol • L-1 and its concentration. Preparation of standard solution of two major direct method and indirect method. 1. direct method weigh accurately reference material, dissolution constant volume after it becomes an accurate concentration of the standard solution. For example, required the preparation of 500mL concentration of 0.01000 mol • L-1 K2Cr2O7 solution, should weigh accurately on an analytical balance reference material K2Cr2O7 1.4709g, plus a small amount of water to make it dissolve quantitatively transferred to a 500mL bottle, diluted with water to scale. Dilute standard solution by dilution of concentrated standard solution. For example, spectrophotometric analysis needs 1.79x10-3mol • L-1 standard solution. Calculations that must weigh accurately 10mg pure iron, but not on the General analytical balance accurate weighing, weighing errors due to its too small and large. Reserves so often used to prepare standard solutions and Diluted to the required concentration of the standard solution. On the analytical balance accurate weighing of high purity (99.99%) iron 1.0000g, then joined in a small beaker approximately 30mL in concentrated hydrochloric acid to dissolve quantitatively transferred to one liter volumetric flask with 1mol • L-1 hydrochloric acid diluted to scale. This standard solution containing iron 1.79x10-2mol • L-1。 Standard solution 10.00mL 100mL remove this volumetric flask with 1mol • L-1 hydrochloric acid diluted to scale, shake the 1.79x10-3mol standard solution containing iron • L-1。 图片: 9冰骄的藕尾也露在水面上。 图片: 10红艳三百重的芽,这个是下种的时候就有的,绿的那个是新长出来的! 图片: 11这一盆种的是莺 莺 图片: 12莺 莺的藕尾已经有点干了,已经有了些抵抗力哦!但是现在还不能加太多的水! solution should properly save, avoid for water evaporation and makes solution concentration occurred changes; some enough stable, as see light easy decomposition of AgNO3 and KMnO4, standard solution should storage Yu Brown bottle in the, and placed dark save; can absorption air in the carbon dioxide and on glass has corrosion role of alkali solution, best loaded in plastic bottle in the, and in bottle at loaded a alkali lime tube, to absorption air in the of carbon dioxide and water. Standard solution for unstable, long back, also recalibrated their concentration before use. Chapter III microbiological base (intermediate) first aseptic sampling techniques the unit about the aseptic sampling operation, before discussing the cause of aseptic sampling and collection methods, it is necessary to understand the "sterile" of the term, "sterile" is generally used in sampling, means that the sampling process, avoid the pollution caused by the operation. A sterile sample collection should be adopted in such a way, that is: in the process of collecting, should avoid contamination, then placed into a sterile container. Sterile sample collection is intended to support, against the plant sanitation status of the inspection findings. First, getting ready for a test: 1. packaging aseptic sampling of tools: having the right product or process of aseptic sampling device tools is essential. Unless you use the acquisition tools, otherwise the integrity of samples was suspected, samples even meaningless. In order to avoid without a proper sampling tools, recommended the establishment of a sterile sample analysis list to collect sampling tool. Container holdingin chemical experiments, standard solution mol • L-1 and its concentration. Preparation of standard solution of two major direct method and indirect method. 1. direct method weigh accurately reference material, dissolution constant volume after it becomes an accurate concentration of the standard solution. For example, required the preparation of 500mL concentration of 0.01000 mol • L-1 K2Cr2O7 solution, should weigh accurately on an analytical balance reference material K2Cr2O7 1.4709g, plus a small amount of water to make it dissolve quantitatively transferred to a 500mL bottle, diluted with water to scale. Dilute standard solution by dilution of concentrated standard solution. For example, spectrophotometric analysis needs 1.79x10-3mol • L-1 standard solution. Calculations that must weigh accurately 10mg pure iron, but not on the General analytical balance accurate weighing, weighing errors due to its too small and large. Reserves so often used to prepare standard solutions and Diluted to the required concentration of the standard solution. On the analytical balance accurate weighing of high purity (99.99%) iron 1.0000g, then joined in a small beaker approximately 30mL in concentrated hydrochloric acid to dissolve quantitatively transferred to one liter volumetric flask with 1mol • L-1 hydrochloric acid diluted to scale. This standard solution containing iron 1.79x10-2mol • L-1。 Standard solution 10.00mL 100mL remove this volumetric flask with 1mol • L-1 hydrochloric acid diluted to scale, shake the 1.79x10-3mol standard solution containing iron • L-1。 图片: 13莺 莺的芽 图片: 14,因为我是在楼顶上种,风特别的大,又怕下雨把藕给淹了,所以就在上面加了个玻璃盖着.有空气流通的哦, 玻璃我是搭在花台的上面!中间是空的，可以放很多的盆进去～