Phase Sensitive Multimeters
A new generation of versatile measurement instruments
PSM1700 PsimetriQ
PSM1735 NumetriQ
10uHz to 1MHz
10uHz to 35MHz
Lenovo
高亮
Lenovo
高亮
Lenovo
附注
N4L psm1700/1735 高性能频率响应分析仪,技术支持与咨询:N4L 中国--吴经理 18665876229 jectronic.cn@gmail.com 或 yujin.wu@miko.com.cn
Lenovo
高亮
Lenovo
高亮
Lenovo
附注
N4L psm1700/1735 高性能频率响应分析仪,技术支持与咨询:N4L 中国--吴经理 18665876229 jectronic.cn@gmail.com 或 yujin.wu@miko.com.cn
In a world where engineers from many different application areas require ever increasing speed, flexibility and measurement
accuracy, N4L introduce a new generation of versatile measurement instruments that offer leading performance in every mode
without the compromise on accuracy or the additional cost that is commonly associated with such flexible instruments.
Utilising the latest DSP and FPGA technology to optimise the use of innovative analogue hardware, many measurements functions
can be derived with great precision from the basic elements of true rms voltage on two measurement channels plus the phase angle
between them. It is from this fundamental relationship between independent voltages and their relative phase angle that the phrase
‘Phase Sensitive Multimeter’ was derived and this is also the key to the unique combination of performance versatility and value
provided by the PSM range.
Versatility without compromise
Whether you will make use of just one or all six of the primary measurement modes
included in the PSM1700 and PSM1735, you can be sure of the exceptional
accuracy, speed and ease of use that only the latest design technology can provide.
Frequency Response Analyser
Incorporating a digital
signal generator, two
differential auto-ranging
voltmeters, auto-scale
frequency plots and
intuitive setup stored into
non-volatile memory;
the PSM range brings
accurate and simple
to operate frequency
response analysis within
the grasp of many who
could not previously
consider an FRA
Features
Differential inputs
Fast sweep with up to 20 frequency steps per second
DFT analysis giving exceptional noise rejection
Automatic Gain/Phase margin computation
Storage of results into non-volatile memory
FRA Example applications
• Power supply gain and phase analysis • Electronic filter design and test • Speaker and amplifier test • Mechanical vibration analysis • Electro-Mechanical control loop analysis
PSM1700 with N4L injection transformer testing an SMPS
Selection of the most
suitable display format
is very easy, switching
between real time,
tabular or graphical
presentation from any
mode with a single key
stroke
FRA table with cursor point selected
Real time mode at cursor point
In real time mode, the
display functions are user
selectable and can be
presented in any order
and at any of three zoom
levels. Cursor keys can
then be used to adjust
amplitude and frequency
with selectable step size
to provide complete
control of test conditions.
Vector Voltmeter
Unique to the VVM
mode is a null meter
display that provides
the feel of traditional
analogue instruments
while maintaining the
precision of a 6 digit
phase display and 1
milli-degree phase
resolution.
A high stability signal generator with direct digital synthesis, true rms
sensing voltmeters and discreet fourier analysis combine to provide
phase measurement accuracy beyond any comparable product.
Features
Simultaneous measurement of all functions
Synchronised to internal or external frequency source
VVM Example applications
• Electrochemical materials analysis • Current transformer testing • Phase meter calibration
LCR Meter Whether using an external shunt, an LCR
Active Head or the
Impedance Analyser
Interface; LCR mode
provides all impedance
parameters quickly
and accurately either
at single frequencies or
over a user defined
frequency sweep.
LCR Head – 10uHz to 5MHz
IAI – 10uHz to 35MHz
PSM1700 with LCR Active Head PSM1735 with Impedance Analyser Interface
6 digit resolution and
exceptional phase
stability permit testing
of the most demanding
components such as
low ESR capacitors
Any point in a sweep
can be selected with a
cursor and viewed in a
detailed results table.
Features
Wide frequency range
Freq, Phase and Tan Delta to 6 digits
Passive shunt or active head options
Graph or table of any function
Sweep results store to memory
LCR Example applications
• Component testing • Electrochemistry • Circuit impedance analysis • Testing resonance
In addition to providing the raw data from which all other
functions are derived, each channel can be used directly for
applications requiring precision rms measurement. Unlike
many voltmeters, AC and DC components are quantified
separately and dBm, peak, CF and surge values are displayed.
Both units utilise independent differential circuits
permitting simultaneous analysis of two points at a
different potential. For example, the input and output on
voltage converter or two windings on a transformer.
RMS Voltmeter
Power Meter
The combination of true rms
measurement channels, precision
phase analysis, high speed
computation and a versatile
graphic display provide an ideal
solution to many applications that
involve rapid changes in power.
Features
Real time true rms measurement with
no missed data.
Synchronisation with fundamental
down to 10ms period.
Datalog of up to 4 functions stored into
non-volatile memory.
Watch results during datalog capture
with scroll display.
Real time DFT harmonic analysis.
Power Meter applications
• Power profile testing • SMPS standby analysis • Distortion analysis • PFC testing
Watts graph with cursor at log no. 2351
Real time display after datalog
Harmonic Analyser
The Harmonic Analyser mode simultaneously measures
individual harmonic components and total harmonic
distortion values on both measurement channels.
Discrete Fourier Transform algorithms permit fundamental
harmonic components to be quantified accurately even in
the presence of noise and distortion.
PC control, data capture and file storage
CommGRAPH PC software provides control of FRA, VVM and LCR functions with
Graphical and Tabular data presentation, dual cursor measurements, automatic
gain phase margin function plus print, copy, save to file and firmware download.
CommVIEW PC software supplied as standard, provides script file instrument
control, result storage in .txt format and firmware download.
PSM1700 and PSM1735
Frequency Response Analyser
Measurement Magnitude, gain (CH1/CH2 or CH2/CH1), gain (dB), offset gain (dB), phase (°)
Frequency range 10uHz to 1MHz 10uHz to 35MHz
20mHz to 500kHz with ext source 20mHz to 35MHz with ext source
Gain accuracy in dB 0.02dB < 1kHz 0.01dB + 0.001dB/kHz < 1MHz
0.05dB < 10kHz 0.1dB + 0.04dB/MHz < 35MHz
0.1dB + 0.001dB/kHz < 1MHz
Phase accuracy 0.02° < 10kHz 0.02° < 10kHz
0.02° + 0.003°/kHz < 1MHz 0.05° + 0.0001°/kHz < 35MHz
Frequency source Generator or CH1 input
Measurement Real-time DFT, no missing data
Speed Up to 100 readings per second
Filter Selectable from 0.2 seconds
Resolution 5 or 6 digits
Accessories and Ports
Standard accessories
Probes 2 off with PSM1700 – 4 off with PSM1735
Leads Output, RS232, Power
Software CommVIEW
Documentation Calibration Certificate, User Manual
PSM1700 PSM1735
Vector Voltmeter
Measurement In-phase, quadrature, tan Ø, magnitude, phase, in-phase ratio,
rms, rms ratio, LVDT differential, LVDT ratiometric
Frequency range 10uHz to 1MHz 10uHz to 35MHz
20mHz to 500kHz with ext source 20mHz to 35MHz with ext source
Basic accuracy (ac) 0.05% range + 0.05% reading + 0.05mV < 1kHz
Basic + 0.02%/kHz < 10kHz Basic + 0.001%/kHz < 10kHz
Basic + 0.2% + 0.002%/kHz < 1MHz Basic + 0.002%/kHz < 1MHz
Basic + 1.6% + 0.4%/MHz < 35MHz
LCR Meter
Functions L, C, R (ac), Q, tan delta, impedance, phase – Series or parallel circuit
Frequency range 10uHz to 1MHz 10uHz to 35MHz
Current shunt External or N4L active head or Impedance Analysis Interface
Ranges Inductance – 100nH to 10kH
(LCR Head or IAI) Capacitance – 10pF to 1000uF
Resistance – 10mΩ to 100MΩ
Basic accuracy 0.1% + tolerance of selected current shunt
Sweep capability All ac functions
True RMS Voltmeter
Channels 2
Frequency range DC to 1MHz DC to 1MHz
1MHz to 35MHz fundamental only
Measurement rms, ac, dc, peak, cf, surge, dBm
Basic accuracy (ac) As VVM + 0.2mV As VVM + 0.05mV
Accuracy (dc) 0.1% range + 0.1% reading + 1mV 0.1% range + 0.1% reading + 0.5mV
Power Meter
Measurements W, VA, PF, V, A, - total, fundamental and integrated, power harmonics
Frequency range 20mHz to 1MHz 20mHz to 1MHz
1MHz to 35MHz fundamental only
Current shunt External or use N4L power adaptor
Current accuracy As voltage + external shunt tolerance
Watts accuracy 0.15% VA range + 0.15% reading 0.1% VA range + 0.1% reading
+ external shunt tolerance + external shunt tolerance
Harmonic Analyser
Scan Single or series
Frequency range 10uHz to 1MHz
Measurement Harmonic, series THD or difference THD
Max harmonic 50
Ports
RS232 Baud rate to 19200
RTS/CTS flow control
Parallel 8 output, 4 input – 25 Pin D Type
Analog output 0V to +4V on any measured function – BNC
Sync output Pulse synchronised to generator
Extension ports 2
(N4L accessories) 15 pin female D type and 6 pin mini-din
LAN (option L) 10/100 base-T Ethernet auto sensing RJ45
GPIB (Option G) IEEE488.2 compatible
PSM17xx PSM1700 PSM1735
Datalog
Functions Up to 4 measured functions user selectable
Datalog Window From 10ms with no gap between each log
Memory RAM or non-volatile up to 8000 records
Input Ranges
Inputs 2 differential 2 balanced differential
Connectors Isolated BNC Dual grounded BNC
Coupling ac or ac+dc
Max input 100Vpk from earth 10Vpk from earth
Input ranges 100V, 30V, 10V, 3V, 1V, 300mV, 10V, 3V, 1V, 300mV, 100mV, 30mV,
100mV, 30mV, 10mVpk 10mV, 3mV, 1mVpk
Scaling 1 x 10^-9 to 1 x 10^9
Ranging Full auto, up only or manual
Input impedance 1M // 50pF (exc. leads) 1M // 30pF (exc. leads)
Signal Generator
Type Direct digital synthesis
Frequency 10uHz to 1MHz 10uHz to 35MHz
Waveforms Sine, triangle, square, sawtooth Sine, square (1MHz)
Accuracy Frequency ±0.05% Frequency ±0.05%
(with no trim) Amplitude ±5% < 100kHz Amplitude ±5% < 10MHz
Amplitude ±10% < 1MHz Amplitude ±10% < 35MHz
Impedance 50Ω ±2%
Output voltage 0V to ±10Vpk
Output resolution 5mV 50uV to 5mV level dependent
Offset 0V to ±10Vpk
Offset resolution ±10mV
Clock rate 11.52MHz 150MHz
Connector Grounded BNC
High Speed Data Streaming
Rate 1500 readings/s max
Window 660us to 1s Synchronized to waveform
Buffer 8000 results
General
Display 320 x 240 dot LCD – white LED backlight
Alarm Any displayed function
hi, lo, inside window, or outside window
Program stores 100, one loaded on power up
Sweep stores 30, all parameters in any sweep function
Remote operation Full capability, control and data
Size 170H x 350W x 250D mm approx
Temperature 5 to 35°C
Weight 4kg approx
Power supply 90-264V rms 47-63Hz 30VA max
All specif ications at 23°C +/- 5°C. These specif ications are quoted in good faith but
Newtons4th Ltd reserves the right to amend any specif ication at any time without notice
Newtons4th Ltd 30 Loughborough Rd Mountsorrel Loughborough Leics LE12 7AT UK Tel: +44(0)116 2301066 Fax: +44(0)116 2301061 e-mail: sales@newtons4th.com
Measurement specifications
System specifications
Lenovo
高亮
Lenovo
附注
N4L psm1700/1735 高性能频率响应分析仪,技术支持与咨询:N4L 中国--吴经理 18665876229 jectronic.cn@gmail.com 或 yujin.wu@miko.com.cn
<<
/ASCII85EncodePages false
/AllowTransparency false
/AutoPositionEPSFiles true
/AutoRotatePages /All
/Binding /Left
/CalGrayProfile (Dot Gain 20%)
/CalRGBProfile (sRGB IEC61966-2.1)
/CalCMYKProfile (U.S. Web Coated \050SWOP\051 v2)
/sRGBProfile (sRGB IEC61966-2.1)
/CannotEmbedFontPolicy /Warning
/CompatibilityLevel 1.4
/CompressObjects /Tags
/CompressPages true
/ConvertImagesToIndexed true
/PassThroughJPEGImages true
/CreateJDFFile false
/CreateJobTicket false
/DefaultRenderingIntent /Default
/DetectBlends true
/ColorConversionStrategy /LeaveColorUnchanged
/DoThumbnails false
/EmbedAllFonts true
/EmbedJobOptions true
/DSCReportingLevel 0
/SyntheticBoldness 1.00
/EmitDSCWarnings false
/EndPage -1
/ImageMemory 1048576
/LockDistillerParams false
/MaxSubsetPct 100
/Optimize true
/OPM 1
/ParseDSCComments true
/ParseDSCCommentsForDocInfo true
/PreserveCopyPage true
/PreserveEPSInfo true
/PreserveHalftoneInfo false
/PreserveOPIComments false
/PreserveOverprintSettings true
/StartPage 1
/SubsetFonts true
/TransferFunctionInfo /Apply
/UCRandBGInfo /Preserve
/UsePrologue false
/ColorSettingsFile ()
/AlwaysEmbed [ true
]
/NeverEmbed [ true
]
/AntiAliasColorImages false
/DownsampleColorImages true
/ColorImageDownsampleType /Bicubic
/ColorImageResolution 300
/ColorImageDepth -1
/ColorImageDownsampleThreshold 1.50000
/EncodeColorImages true
/ColorImageFilter /DCTEncode
/AutoFilterColorImages true
/ColorImageAutoFilterStrategy /JPEG
/ColorACSImageDict <<
/QFactor 0.15
/HSamples [1 1 1 1] /VSamples [1 1 1 1]
>>
/ColorImageDict <<
/QFactor 0.15
/HSamples [1 1 1 1] /VSamples [1 1 1 1]
>>
/JPEG2000ColorACSImageDict <<
/TileWidth 256
/TileHeight 256
/Quality 30
>>
/JPEG2000ColorImageDict <<
/TileWidth 256
/TileHeight 256
/Quality 30
>>
/AntiAliasGrayImages false
/DownsampleGrayImages true
/GrayImageDownsampleType /Bicubic
/GrayImageResolution 300
/GrayImageDepth -1
/GrayImageDownsampleThreshold 1.50000
/EncodeGrayImages true
/GrayImageFilter /DCTEncode
/AutoFilterGrayImages true
/GrayImageAutoFilterStrategy /JPEG
/GrayACSImageDict <<
/QFactor 0.15
/HSamples [1 1 1 1] /VSamples [1 1 1 1]
>>
/GrayImageDict <<
/QFactor 0.15
/HSamples [1 1 1 1] /VSamples [1 1 1 1]
>>
/JPEG2000GrayACSImageDict <<
/TileWidth 256
/TileHeight 256
/Quality 30
>>
/JPEG2000GrayImageDict <<
/TileWidth 256
/TileHeight 256
/Quality 30
>>
/AntiAliasMonoImages false
/DownsampleMonoImages true
/MonoImageDownsampleType /Bicubic
/MonoImageResolution 1200
/MonoImageDepth -1
/MonoImageDownsampleThreshold 1.50000
/EncodeMonoImages true
/MonoImageFilter /CCITTFaxEncode
/MonoImageDict <<
/K -1
>>
/AllowPSXObjects false
/PDFX1aCheck false
/PDFX3Check false
/PDFXCompliantPDFOnly false
/PDFXNoTrimBoxError true
/PDFXTrimBoxToMediaBoxOffset [
0.00000
0.00000
0.00000
0.00000
]
/PDFXSetBleedBoxToMediaBox true
/PDFXBleedBoxToTrimBoxOffset [
0.00000
0.00000
0.00000
0.00000
]
/PDFXOutputIntentProfile ()
/PDFXOutputCondition ()
/PDFXRegistryName (http://www.color.org)
/PDFXTrapped /Unknown
/Description <<
/FRA
/ENU (Use these settings to create PDF documents with higher image resolution for improved printing quality. The PDF documents can be opened with Acrobat and Reader 5.0 and later.)
/JPN
/DEU
/PTB
/DAN
/NLD
/ESP