兄弟打印机清零大全

兄弟打印机清零大全 一、兄弟4040CN、4050彩打硒鼓清零方法 兄弟4040CN彩色激光打印机更换硒鼓后清零方法如下: 当打印机出现“Drum End Soon”等字母提示时，就提醒您要更换硒鼓了。 当您更换新的硒鼓时，您需要通过以下步骤重置硒鼓计数器: 1、打开打印机电源开关。 2、按下“+” 或 “-” 键，选择Machine Info. ( 机器信息)。 3、按下“OK” 执行下一级菜单，然后按下“+” 或 “-” 键，选择“Reset Parts Life” ( 重置零件寿命)。 4、按下“OK”，然后按下“+” 键，选择“Drum Unit” ( 硒鼓单元)。 5、按两次“OK”。 二、兄弟3040cn清零方法 1、同时按下 secure print和 cancel 四秒钟 2、根据提示自动更换粉，然后按下两次OK，就大功造成了，是不是很简单呀。 三、兄弟7420，2820加粉后清零 打开前盖，按选项，再按星号键，然后是零零 四、ALL系列(HL2040、HL2070N)，AL系列(HL5240、HL5250DN)清零方法 1、确保已将打印机电源打开并且硒鼓指示灯闪烁，打开打印机前盖。 2、按住GO按钮约四秒钟,直到所有的指示灯亮起。四个指示灯都亮起后,松开GO按钮。 and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency response (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic 五、ALL-FB/ALL-SF(MFC7420/7220/DCP7010/7025/FAX2820) 清零方法 1、请确保前盖打开,然后按控制面板上的Option(选项)键 2、A,对于DCP系列机器 当屏幕上出现Replace Drum?(更换硒鼓)信息时,请按?键.当屏幕上出现Accepted(已接受)信 息时,请合上前盖. B, 对于MFC系列的机器 1、当屏幕上出现Replace Drum?(更换硒鼓)信息时,请按数字 2、当屏幕上出现Accepted(已接受)信息时,请合上前盖. 六、FAX8370清零方法 1、装入新硒鼓单元，并保持前盖打开。 2、按“清除”键，当显示“ACCEPTED",按1，然后合上前盖。 七、 HL1850/1870N/6050D/6050DN清零方法 打开前盖，按住“运行(GO)”按钮直到“>>>>DRUM CLEAR”信息出现在液晶屏上。 显影偏压的强制初始化步骤 八、HL2040/2070N 清零方法 1(打开前盖 2(取出硒鼓单元 3(按“GO”运行按钮 4(将硒鼓单元装入打印机 and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency response (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic 5(按“GO”运行按钮 6(关闭前盖 九、FC7420 清零方法 1(打开前盖 2(按”选项”键 3(依次按*、0、0 4(关闭前盖 十、DCP7010/7025 清零方法 1(打开前盖 2(依次按“选项”、“启动” 3(若使用墨粉(中国地区都使用标准墨粉)按?或?键数次使LCD显示“11” 4(按“设定”键，LCD上出现“ACCEPTED”(已接受) 5(关闭前盖 十一、FAX2820/MFC7220清零方法 1(打开前盖 2(按“选项”键 3(依次按*、0、0 4(关闭前盖 and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency response (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic 十二、MFC8220/MFC8440清零方法 1(打开前盖 2(按“清除/返回”键 3(依次按*、0、0 4(关闭前盖 注意:更换新墨粉盒时(请勿断电)，请务必在缺粉指示灯亮时打开前盖。 若客户更换了新墨粉盒但机器未检测到仍旧报错，或更换了旧粉盒打印偏淡，可以对显影偏压和显影辊计数强制初始化，也就是按照以上步骤操作。 十三、HL2040/2070N清零方法 打开前盖，然后按住“GO”键直到所有灯全闪后松开，把硒鼓取出来再放进去(或换新硒鼓)，关闭前盖 MFC系列机型(如7420/7220等) ”键，打开前盖，然后按“选项”键，LCD显示“Replace Drum” (更换硒鼓)，按 “1当LCD显示“Accepted” (已接受)时，关闭前盖 十四、DCP系列机型(如7010/7025等)清零方法 打开前盖，然后按“选项”键，LCD显示“Replace Drum”(更换硒鼓)，按“?”键，当LCD显示“Accepted” (已接受)时，关闭前盖 FAX系列机型(如2820等) 打开前盖，然后按“选项”键，LCD显示“Replace Drum” (更换硒鼓)，按 “1”键，当LCD显示“Accepted” (已接受)时，关闭前盖 注意:更换新硒鼓时(请勿断电)，请务必在更换硒鼓指示灯亮时打开前盖。 若客户更换了新硒鼓但机器未检测到仍旧报错，或更换了旧硒鼓打印偏淡，可以对硒鼓单元计数强制初始化，也就是按照以上步骤操作。 三星激光打印机清零大全 and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency response (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic 2011-03-08 22:44 252人阅读 评论(0) 收藏 举报 三星ML808多功能一体机，显示TONER EMPTY，如何处理 很多朋友在加过粉后，机器会显示TONER EMPTY 碰到这种情况，多数是要清零以下是清零方法: 1,按住停止键,拔掉电源在插上电源,按住开始键(按住不放) 2.同时放开俩键,在按确认键... 三星555P多功能一体机，显示TONER EMPTY，如何处理 很多朋友在加过粉后，机器会显示TONER EMPTY 碰到这种情况，多数是要清零以下是清零方法: 1,按住停止键,拔掉电源在插上电源,按住开始键(按住不放) 2.同时放开俩键,在按确认键... 三星4216换粉清零方法 三星4216换粉清零方法:按菜单 按# 按1934(两秒钟内完成)--按菜单—按用滚动键找到NEW开头的选项—按2次确认---按菜单---按#--按1完成 三星SCX-4116清零 三星SCX-4116 多功能机加粉后报缺粉。。。 换完粉后依次按下面板的 菜单,上一级,左箭头,右箭头,上一级,确认(4秒内完成)直到出现一个英文是,,,,后再按菜单,右箭头三次,直到出现一个英文字母的后三个字是,,,的按确认,这时出现了正常的时间下面有,,,字母,再按确认 然后关机重起就好了 三星4216清零 三星4216一体机更换硒鼓(或加粉)仍旧会显示TONE EMPTY 解决方法:按菜单——#1934(快速按完)——屏幕会有TECH字母显示——菜单——向左箭头——显示NEW CARTRIDGE——确定——确定。 *********************************************************************** 凡三星555、808、5100此三种机型的激光一体机，客户更换新鼓后，需如下操作才能正常收发使用: 拔下电源---按住停止键不放并再将电源插上后----直到屏幕显示:"CHINA"---再按两下开始键，即可; (此方法同样适用于机器做全清操作;菜单/#号/1934联系按---TECH-) scx4521f 三星4521换粉清零方法:按菜单 按# 按1934(两秒钟内完成)--按菜单—按用滚动键找到NEW开头的选项—按2次确认---按菜单---按#--按1完成 [原创]三星4X16系列加粉后清零方法～～～ 4016和4216F: 1。进入维修模式:菜单--- # ---- 1 ---- 9 ---- 3 ---- 4 (动作要快～)成功后屏幕显示:TECH and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency response (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic 2。输入:菜单 ---- 左箭头 ---- 显示NEW CARTRIDGE ---- 确定 ---- 确定 3。退出维修模式:方法和进入相同。 4116: 1。进入维修模式:菜单 --- 上一级 ---- 左箭头 ---- 右箭头 ---- 上一级 ---- 星号* (必须在2秒内输完，请找机会反复练习) 2。基本同4016，只要找到NEW CARTRIDGE 那一项，确定即可。 3。退出维修模式:和进入相同或直接按“停止键”。 松下传真机清零 2007-4-04松下 KX系列 1、KX-F50/90:依次按下 :“program” “# ” “9” “0” “0” “0” “*” 即可进入测试模式，然后输入 “#” “5” “0” “start/copy” 可对机器进行程序全清。对F90输入“# ” “6” “0” “3” “set” 可将切纸刀关闭(仅对切纸机器有效)。 2、从KX-F808/818/828/108/118/858/868/32/36/39/23/25到现在的KX-F66/68/82/88以及 F500等等(别头晕):依次按下“功能FUNCTION(有的机器为菜单MENU)” “#” “9” “0” “0” “0” “*” 可进入维修方式，然后输入“#” “5” “5” “0” “启动”(108/118/208/218则是按“选择”“录入”)可对机器进行程序全清。输入“5” “6” “0” “2”可将切纸刀关闭(仅对切纸机器有效)。*注:维修代码从“#500”开始，其他代码含义受篇幅所限，此处略过不表。 松下153.165系列维修模式与总清! 1.目录+#+9000+*(维修模式被选中) 2.目录+#+9000+*+550+启动+断电(总清) 松下503/553传真机多页发送一怪问题 用松下503CN/553传真机多页发送一怪问题,发送2至3张没有问题,一切正常,但是发送4张或7张,传真机就报卡纸!复印十张以上都是正常的,求解??? 将521调到国际方式,596,717,718等等,771也可试试(527将”2”调到”1”,一般不能随便调) 进维修模式后,关闭559项试一下 CALL SERVICE 4 马达风扇故障 CALL SERVICE 3 定影部位故障 CALL SERVICE 2表示 齿轮组故障 功能,,,,,,进入维修状态，目录#9000*550启动是总清 松下8595传真机显示错误026 处理方法:更换面板右上方的一块锂电池 维修宝典中的松下UF—208M 传真机的维修进入方式应为:依次按FUNCTION "电话拨号”电话/拨号” “电话/拨号” “电话/拨号”“*”进入 UF松下系列传真机总清! 功能#*##06总清 and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency response (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic 松下82.81.E1系列(传真机)总清! 目录#*##06启动清零 松下UF-E1CN 功能?#?*?#?#?06?复印?99?复印 松下503传真机通病:发送、复印拉长松下503传真机通病:发送、复印拉长，很多机子用了一段时间后就有这毛病，清洁原稿进纸胶轮后过几天又会，应该是设计的问题，进纸轮很小，磨擦力不够，原因是CIS上有个摩擦片破了，所以造成拉长，可以用几层胶带搞定，但是不能根本解决问题，要想根本解决问题的话，只有换CIS～ 松下503复印有白条 清洁鼓下面的激光系统擦扫描头及激光器 拿起鼓，清洁机子鼓下面的玻璃就好了 三星传真机的清机有两种方法:一。按住“停止”插电直到显示“中国”按“启动”即可。 进入技术模式:设置 # 1934 找:MEAMERY CLEARING ] B( UF系列 UF2:依次按“MENU” “MENU” “MENU” “TEL” “TEL” “TEL” “TEL”可进入维修方式。 UF108M:依次按“#” “TEL/DIAL” “TEL/DIAL” “TEL/DIAL” “TEL/DIAL” “*”可进入维修方式。 UF200/208M:依次按“功能” “电话/拨号” “电话/拨号” “电话/拨号” “电话/拨号”“*”可进 入维修方式，其中第“06”项为全清。 UF8100/8110/8200/8220:依次按 “功能” “4” “#” “*” “#” “#”可进入维修方式，其中第 “06”项为全清。 UF8300/8310/8330/8350/8700/8710/8770/8880/8585/8595/8885/8895:依次按 “功能” “7” “MONITOR” “MONITOR” “MONITOR” “MONITOR” “*”可进入维修方式，其中第“06”项为全清。 注:06项全清中有多项选择，(图象数据、通信参数等等)其中一般“*”或“99”为全部参数的初始化。 维修宝典中的松下UF—208M 传真机的维修进入方式应为:依次按FUNCTION "电话拨号”电话/拨号” “电话/拨号” “电话/拨号”“*”进入。 松下KX-F90B传真机 利用裁纸刀软件的修改使裁纸刀不动作，而传真机正常工作的方法: 按下功能键(PROGRAM)，再按#键，接着按数字键9000和X键，最后按数字键60，此时传真机屏幕将显示“1”，这是传真机裁纸刀工作的代码。欲使裁纸刀不工作，按下数字键3，接下来按设置键(SET)，最后按功能键(PROGRAM)，传真机回到待机状态。 无纸显示:E-06 纸仓盖未盖好显示:E-07 个人维修总结: 松下8595传真机显示错误026 and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency response (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic 处理方法:更换面板右上方的一块锂电池 兄弟2040、7010、7220、7420 恢复出厂设置方法 2007-4-04 兄弟2040恢复出厂设置方法: 打开打印机，按住“GO”键，等到“Toner、Drum、Paper”三个灯依次亮起后，按“GO”键8次，(8次“GO”键要在2秒钟之内按完。) 兄弟7010恢复出厂设置方法: 打开打印机，依次按“功能键、启动和四下“?”键即可。 ※ 7220、7420恢复出厂设置方法同上(7010的设置方法)。(带传真的也可以依次按“功能键、*、2、8、6、4“恢复出厂设置) 兄弟MFC 7220 ,重设硒鼓计数器 2007-4-04 MFC 7220 ,重设硒鼓计数器 1、要重置硒鼓计数器,请确保前盖打开,然后按控制面板上的Option(选项)键 2 、 A,对于DCP系列机器 当屏幕上出现Replace Drum?(更换硒鼓)信息时,请按?键.当屏幕上出现Accepted(已接受)信息时,请合上前盖. B, 对于MFC系列的机器 当屏幕上出现Replace Drum?(更换硒鼓)信息时,请按数字1.当屏幕上出现Accepted(已接受)信息时,请合上前盖. 以上是清鼓的方法。 兄弟2040清零方法 兄弟2040清零方法 1( 关闭电源，将2040前盖打开 2( 按住“GO”键开机 3( 等“Ready”灯熄灭 4( 松开“GO”键，所有灯熄灭 5( 快速按“GO”键三次，三个灯点亮 6( 快速按“GO”键九次 7( 盖上前盖，机器恢复出厂设置 8.断开电源重开机 9.完成 兄弟Brother全系列打印机清零大全2012-02-15 14:24兄弟Brother全系列打印机清零大全 来源:南方煜森 编辑:黄兰 日期:2011-8-29 and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency response (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic 一、兄弟4040/4050彩打硒鼓清零方法 兄弟4040CN彩色激光打印机更换硒鼓后清零方法如下: 当打印机出现“Drum End Soon”等字母提示时，就提醒您要更换硒鼓了。 当您更换新的硒鼓单元时，您需要通过以下步骤重置硒鼓计数器: 1、打开打印机电源开关。 2、按下“+” 或 “-” 键，选择Machine Info. ( 机器信息)。 3、按下“OK” 执行下一级菜单，然后按下“+” 或 “-” 键，选择“Reset Parts Life” ( 重置零件寿命)。 4、按下“OK”，然后按下“+” 键，选择“Drum Unit” ( 硒鼓单元)。 5、按两次“OK”。 二、兄弟3040cn清零方法 1、同时按下 secure print和 cancel 四秒钟 2、根据提示自动更换粉，然后按下两次OK，就大功造成了，是不是很简单呀。 三、兄弟7420，2820加粉后清零 打开前盖，按选项，再按星号键，然后是零零 四、ALL系列(HL2040、HL2070N)，AL系列(HL5240、HL5250DN)清零方法 1、确保已将打印机电源打开并且硒鼓指示灯闪烁，打开打印机前盖。 2、按住GO按钮约四秒钟,直到所有的指示灯亮起。四个指示灯都亮起后,松开GO按钮。 五、ALL-FB/ALL-SF(MFC7420/7220/DCP7010/7025/FAX2820)清零方法 1、请确保前盖打开,然后按控制面板上的Option(选项)键 2、A,对于DCP系列机器 当屏幕上出现Replace Drum?(更换硒鼓)信息时,请按?键.当屏幕上出现Accepted(已接受)信息时,请合上前盖. and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency response (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic B, 对于MFC系列的机器 1、当屏幕上出现Replace Drum?(更换硒鼓)信息时,请按数字 2、当屏幕上出现Accepted(已接受)信息时,请合上前盖. 六、FAX8370清零方法 1、装入新硒鼓单元，并保持前盖打开。 2、按“清除”键，当显示“ACCEPTED",按1，然后合上前盖。 七、 HL1850/1870N/6050D/6050DN清零方法 打开前盖，按住“运行(GO)”按钮直到“>>>>DRUM CLEAR”信息出现在液晶屏上。 显影偏压的强制初始化步骤 八、HL2040/2070N 清零方法 1(打开前盖 2(取出硒鼓单元 3(按“GO”运行按钮 4(将硒鼓单元装入打印机 5(按“GO”运行按钮 6(关闭前盖 九、FC7420清零方法 1(打开前盖 2(按”选项”键 3(依次按*、0、0 4(关闭前盖 十、DCP7010/7025清零方法 and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency response (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic 1(打开前盖 2(依次按“选项”、“启动” 3(若使用标准墨粉(中国地区都使用标准墨粉)按?或?键数次使LCD显示“11” 4(按“设定”键，LCD上出现“ACCEPTED”(已接受) 5(关闭前盖 and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency response (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic