三级安全教育

三级安全教育 Three safety education refers to the new education workshop level and team level education level education, factory staff. New factory personnel (including contract workers, temporary workers, generation training workers, trainees and students who work) must carry out three level safety education not less than three days, and may be assigned work after passing the examination. The main contents of the three level safety education are as follows. The 1. level of safety education Plant safety education in general by the enterprise security department is responsible for. (1) on the party and the relevant national safety guidelines, policies, laws and regulations and the Ministry of electric power industry, electric power production and construction of the relevant rules and regulations on labor protection, the significance, content and basic requirements, so that the new factory personnel to establish "safety first, prevention first" and "safe production. Everybody" thought. (2) the safety production situation of the enterprise, including enterprise development history (including the history of the development of enterprise safety production), characteristics, production enterprises and equipment distribution (emphasis on the performance, function, and attention distribution of special equipment), main dangerous and vital parts, introduce the general knowledge and safety protection, electrical safety knowledge and heavy machinery, safety production organization introduction of enterprises and the main production safety rules and regulations. (3) introduce the experience and lessons of enterprise safety production, analyze and explain the common accident cases in enterprises and industry, and explain the causes of casualty accidents and the handling procedures of accidents. (4) put forward hope and request. Such as the requirement of education personnel according to the "national" rules for the staff and workers and workers work actively to establish incentive regulations; "safety first, prevention first" thought; learning technology, safety operation rules to labor in the production process, often participate in the exchange of experience and production safety accident analysis and safety inspection activities should abide by the rules; and labor discipline, is not allowed to leave work, not illegal operations, not just out of danger zones and key parts; pay attention to work and rest, proper use of labor protection supplies etc.. The new factory personnel must be one hundred percent for education, education should be carried out after the test results fail to re education, until qualified, and fill out the "three card" workers education, plant safety education time is generally 8h. 2. workshop level safety education Each workshop has different production characteristics and different key parts, dangerous areas and equipment. Therefore, when carrying out safety education at the corresponding level, they should be explained in detail according to their respective situations. (1) introduce the production characteristics and characteristics of this workshop. Such as workshop production and process; workshop personnel structure, safety production organization and professional activities; safety requirements and main types of job shop in special places; job shop in hazardous areas, toxic and harmful, post workshop; safety regulations and labor protection supplies wear requirements and precautions; workshop accident prone position and the reasons, and the corresponding special regulations and safety requirements; common accidents of workshop and typical accident case analysis; workplace safety and civilized production experience and problems. (2) introduce the basic knowledge of safety technology according to the characteristics of the workshop. (3) introduce fire safety knowledge. (4) introduce workshop safety production and civilized production system. Workshop level safety education by the workshop administrative leaders and safety personnel responsible for, the general teaching time is 4~8h. 3. team level safety education Team is the front line of enterprise production, and production activities are based on team work. Because the operator is active in the team, the machines and equipment are in the group, the accidents often happen in the team, so the safety education of the team is very important. (1) introduce the general situation, characteristics, scope, working environment, equipment condition, fire protection facilities of the team. The risk factors and dangerous parts of possible injury accidents are introduced, and some typical accidents can be analyzed and explained. (2) to explain the performance of machinery and equipment, tools of the post use, protection device function and use method; to explain this type of work safety procedures and responsibilities and relevant safety precautions, make the students truly ideologically pay attention to production safety, consciously abide by the safety operation procedures, do not violate work, care and correct the use of machinery and equipment, tools etc.; the safety activities and workplace safety inspection and shift system; education students to discover the hidden dangers of accidents or accidents, shall promptly report to the leadership or the relevant personnel, and learn how to deal with the danger of emergency. (3) explain the correct use of labor protection articles and their storage methods and the requirements of civilized production. (4) the actual safety demonstration, focusing on safe operation essentials, side edge demonstration, explanation, attention, and about what operation is dangerous, is a violation of the rules, so that students understand the violation will cause serious consequences. Team safety education focuses on post safety basic education, which is mainly composed of team leader and safety officer. Safety operation method and production skill education can be taught by safety personnel, trainers or master teachers, and the teaching time is from 4 to 8h. New factory personnel only after three levels of safety education, and through the examination, all qualified, before they can mount guard. Three grades of safety education should be filled with safety education card and archived for future reference. Safety production runs through the whole process of production labor, and the three level education is only the beginning of safety education. New factory personnel only carry out three levels of education, can not separate jobs, but also must according to the characteristics of their posts, to them again production skills and safety technology training. Special operations personnel, special training must be carried out, the examination qualified, before they can be documented. In addition, according to the development of enterprises, but also carry out regular refresher training of safety education for workers. This line? In accordance with the regulations on safety training for production and operation units (Order No. 3 of the State Administration of work safety) The contents of the pre job safety training for the sixteenth factories (mines) should include: (1) safety in production and basic knowledge of safety in production; (two) rules and regulations on work safety and labor discipline in this unit; (three) the rights and obligations of employees in safe production; (four) accident, case and so on. Coal mines, non coal mines, dangerous chemicals, fireworks and firecrackers production and management units (mines) Safety training includes the above, Accidents, emergency rescue, accident emergency plans, drills and preventive measures should be added. Seventeenth workshops (workshops, districts, teams) level pre job safety training should include: (I) working conditions and risk factors; (two) occupational injuries and casualties that may be suffered by the type of work performed; (three) safety responsibilities, operational skills and mandatory standards for the types of work performed; (four) processing method, first aid, emergency evacuation and on-site emergency; (five) the use and maintenance of safety equipment and personal protective articles; (six) safety status and regulations of the workshop (section, District, team); (seven) measures to prevent accidents and occupational hazards and safety matters to be paid attention to; (eight) case of accident; (nine) other content that needs training. Eighteenth, team level pre job safety training should include: (1) working instructions for post safety; (two) matters relating to safety and occupational hygiene in connection with post work; (three) case of accident; (four) other content that needs training. `````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````` Three safety education refers to the new recruit workers and new workers transferred to the factory practice, students or other personnel for plant safety education, safety education, safety education workshop. The main contents of the 1. factory safety education (1) to explain the significance of the protection of labor, task, content and the importance of the new factory workers to establish a "safety first" and "responsibility for production safety" thought. (2) the safety profile of the enterprise are introduced, including the history of the development of enterprise security, enterprise production characteristics, plant distribution (introduced close to vital parts, special equipment note), the organization of safety in production, the main production safety regulations (such as factory production safety responsibility system and safety production rules the factory, transportation safety management system, management system and fire protection system and so on). (3) introduce the regulations of the national staff code issued by the State Council and the regulations on rewards and punishments of enterprise staff, as well as various warning signs and signal devices set up in the enterprise. (4) introduce typical enterprise accident cases and lessons, rescue, disaster relief, rescue knowledge, and industrial accident reporting procedures, etc.. Plant safety education generally by the enterprise safety department, time is 4-16 hours. The explanation should be combined with reading pictures, visiting the labor protection education room, and should provide an easy to understand manual. 2. the main contents of workshop safety education (1) introduce the general situation of workshop. As the flow of product, process and production workshop, workshop personnel structure, production status and active safety, hazardous area, poisonous and harmful types of workshop, workshop labor protection rules and regulations on labor protection supplies wear requirements and pay attention to matters, workshop accident prone position and reason, what is the special regulations and safety requirements, This paper introduces the common accidents in workshop and the analysis of typical accident cases, introduces the good deeds and good deeds in workshop safety production, and the concrete methods and requirements of civilized production in workshop. (2) introduce the basic knowledge of safety technology according to the characteristics of the workshop. Such as cold processing workshop is characterized by metal cutting machine tools, more electrical equipment, lifting equipment, transport vehicles, a variety of oils and more, production personnel and more crowded production sites. The machine rotation speed and torque, to educate workers to comply with labor discipline, wear good protective equipment, careful clothes, hair caught in the machine, hand tool rotating abrasion. To tell the workers in clamping, inspection, disassembly, handling the workpiece especially large, to prevent bruising, crushing, cut; adjustment of cutting tool, workpiece, clamping and adjusting gas measuring machine speed shall be stopped; when it will take to cut off the power supply, and hang warning signs, clean iron cannot be used when the hand to. With a hook; the work site should be kept clean, smooth road; wheel installed properly, accessories to meet the requirements of specifications, the gap between the surface of the grinding wheel and the bracket is not too large, do not overexert, standing position should maintain a certain distance and angle with the grinding wheel, and wear protective glasses; long processing ultra high products, due to security measures. Others, such as casting, forging and heat treatment workshops, boiler houses, power distribution stations, dangerous goods warehouses, oil depots, etc., shall, according to their respective characteristics, carry out safety technical knowledge education to new workers. (3) the workshop fire knowledge, including fire prevention policy, workshop of flammable and explosive goods, special need key parts and fire fire, fire supplies place, use a fire extinguisher, fire performance, workshop organization, how to deal with the fire hit. (4) organize new workers to learn safe production documents and safety operation rules and regulations, and should educate new workers to respect their masters, obey instructions, and ensure safe production. Responsible for workshop safety education by workshop director or safety personnel, teaching time usually takes 4~8 hours. 3. the main contents of safety education for teams and groups (1) the production characteristics, working environment, dangerous areas, equipment conditions, fire protection facilities of the teams and groups. Focus on high temperature and high pressure, inflammable and explosive, toxic, corrosive, high-altitude etc. may lead to the risk factors of accidents, the accident analysis team to explain the location and typical accident case. (2) to explain the types of security procedures and responsibilities, focus on ideology should always pay attention to production safety, consciously abide by the rules of safe operation, not illegal operations; love and the proper use of machines and tools; introduces various security activities and work environment safety inspection and shift system. Inform the new worker of the accident or found the hidden trouble, should promptly report to the leadership, take measures. (3) explain how to correctly use and protect the labor protection products and civilized production requirements. To emphasize the machine rotated is not allowed to wear gloves, high speed cutting to wear protective glasses, wear women entering the workshop Haogong cap, to enter the construction site and take a job, must wear a helmet, fasten the safety belt, the work site is clean and tidy, road to smooth objects stacked neatly and etc.. (4) demonstration of safe operation. Organization safety, skilled and experienced older workers safety demonstration, demonstration, edge edge explanation, focus on safety operation essentials, shows how the operation is dangerous, how the operation is safe, causing serious consequences will not abide by the rules. Team safety education team leader or safety officer is responsible, the teaching time is about 2-8 hours. To carry out the three level safety education, content should be comprehensive, but also to highlight the focus, teaching should be easy to understand, it is best to explain on the side, while visiting. Every level of education should be examined in order to deepen the impression.