13款奥迪Q5刷原厂蓝牙 激活蓝牙功能

13款奥迪Q5刷原厂蓝牙 激活蓝牙功能 13款奥迪Q5刷原厂蓝牙(带导航版),新款奥迪Q5激活原厂蓝牙功能,奥迪Q5加装蓝牙系统 高品质保驾护航，打造全新服务年。现在买导航是要求什么,首先就是价格、其次就是质量、最后就是售后。价格低、质量好、售后可靠是科技亚马逊汽车服务连锁的最高服务宗旨。为您的爱车保驾护航就选科技亚马逊。您的爱车还没有加装导航吗,那就OUT了～加装导航后，方便、快捷。导航、DVD、倒车可视、蓝牙、这些功能是车主在日常行车中，必需的功能。 导航，解决了车主在陌生地点迷路的困惑; DVD，解决了车主在寂寞时无聊的难题; 倒车可视，解决了车主对车后盲区不见的恐惧; 蓝牙，解决了车主在行车中接电话时手忙脚乱的担忧; 原车带屏幕车型加装导航，在如今的社会已经不在稀奇，原车屏幕加装导航安装原理为高档车当中原车带一个屏幕，加装一个韩国解码器与导航盒，用原车的屏幕来显示。原车屏幕升级语音导航系统品牌在市面上也是多样。综合考虑选择可靠的品牌，可靠的售后技术。原车屏幕升级导航安装原理，可以通俗的理解为电脑USB接口外接一套硬盘，用电脑的液晶显示器来显示为同一个原理。所以原车屏幕升级导航，涉及到的车型，就比较多了，只要原车带屏幕的车型即可安装原车屏幕升级导航。比方现在的宝马、奔驰、奥迪等原车带屏幕的德系车型。丰田红杉、FJ酷路泽、天籁、本田等日系车型。福特、别克等美系车型原车带屏幕车型即可加装。原车屏幕安装导航，所有插口直接对插，加装完语音导航之后，不影响任何外观，不影响原车任何系统。 原屏升级的好处: 1、针对原厂开发设计的解码器，利用原车的显示屏，即可实现导航功能; 2、原车系统娱乐功能仍然存在，原车碟盒功能仍然能够照常使用; 3、原车的方向盘键盘控制、行车电脑控制等功能仍然存在; 4、原车屏幕升级为可触摸且具备手写功能; 5、配备遥控器，可以实现遥控操作。 6、改装效果很棒，从外观上看不出改装痕迹。 一、产品介绍: 1、只需要安装麦克风，不改其他线路或者解码器辅助，安装简单，完全无损安装(原 车已经预留麦克风安装位置以及线路，只需要简单对插即可) should be conducted in the presence of the supervisor. (7) monitoring instruments and equipment should be checked and corrected after installation, Embedment, and submit calibration reports. Supervision inspection acceptance shall be measured immediately after reading initial values. (8) each measuring point for each observation section within 14 days after planting, to submit their research laid the table control. (9) in the course of construction, all monitoring equipment should be protected, the supervisor requested protection area shall provide protective cover and logo. 10.5.2 surface deformation monitoring (1) surface deformation monitoring point Pier in-situ reinforced concrete Pier, the pier above the ground 1.2m, in undisturbed soil or bedrock (native) deep 1.0~1.5M. (2) the pier top of forced centering plate. (3) when planted, forced centering plate should be horizontal, angle not greater than 4 '. 10.5.3 level monitoring point (1) in the standard location monitoring points around the reserve pit formwork, aspect to facilitate in the leveling of the pit shall prevail. (2) the standard markers together with the accessories insert the bottom has not been final set in advance concrete, exposed bottom concrete should be conducted in the presence of the supervisor. (7) monitoring instruments and equipment should be checked and corrected after installation, Embedment, and submit calibration reports. Supervision inspection acceptance shall be measured immediately after reading initial values. (8) each measuring point for each observation section within 14 days after planting, to submit their research laid the table control. (9) in the course of construction, all monitoring equipment should be protected, the supervisor requested protection area shall provide protective cover and logo. 10.5.2 surface deformation monitoring (1) surface deformation monitoring point Pier in-situ reinforced concrete Pier, the pier above the ground 1.2m, in undisturbed soil or bedrock (native) deep 1.0~1.5M. (2) the pier top of forced centering plate. (3) when planted, forced centering plate should be horizontal, angle not greater than 4 '. 10.5.3 level monitoring point (1) in the standard location monitoring points around the reserve pit formwork, aspect to facilitate in the leveling of the pit shall prevail. (2) the standard markers together with the accessories insert the bottom has not been final set in advance concrete, exposed bottom concrete 2、操作简单，只需在电脑0BD接口简单操作即可 3、不担心4S保修问题，全无损安装 should be conducted in the presence of the supervisor. (7) monitoring instruments and equipment should be checked and corrected after installation, Embedment, and submit calibration reports. Supervision inspection acceptance shall be measured immediately after reading initial values. (8) each measuring point for each observation section within 14 days after planting, to submit their research laid the table control. (9) in the course of construction, all monitoring equipment should be protected, the supervisor requested protection area shall provide protective cover and logo. 10.5.2 surface deformation monitoring (1) surface deformation monitoring point Pier in-situ reinforced concrete Pier, the pier above the ground 1.2m, in undisturbed soil or bedrock (native) deep 1.0~1.5M. (2) the pier top of forced centering plate. (3) when planted, forced centering plate should be horizontal, angle not greater than 4 '. 10.5.3 level monitoring point (1) in the standard location monitoring points around the reserve pit formwork, aspect to facilitate in the leveling of the pit shall prevail. (2) the standard markers together with the accessories insert the bottom has not been final set in advance concrete, exposed bottom concrete 4、配备专用激活手柄，只要插入原车OBD电脑口，即可激活 5、使用效果和高配车带的蓝牙效果一模一样 should be conducted in the presence of the supervisor. (7) monitoring instruments and equipment should be checked and corrected after installation, Embedment, and submit calibration reports. Supervision inspection acceptance shall be measured immediately after reading initial values. (8) each measuring point for each observation section within 14 days after planting, to submit their research laid the table control. (9) in the course of construction, all monitoring equipment should be protected, the supervisor requested protection area shall provide protective cover and logo. 10.5.2 surface deformation monitoring (1) surface deformation monitoring point Pier in-situ reinforced concrete Pier, the pier above the ground 1.2m, in undisturbed soil or bedrock (native) deep 1.0~1.5M. (2) the pier top of forced centering plate. (3) when planted, forced centering plate should be horizontal, angle not greater than 4 '. 10.5.3 level monitoring point (1) in the standard location monitoring points around the reserve pit formwork, aspect to facilitate in the leveling of the pit shall prevail. (2) the standard markers together with the accessories insert the bottom has not been final set in advance concrete, exposed bottom concrete should be conducted in the presence of the supervisor. (7) monitoring instruments and equipment should be checked and corrected after installation, Embedment, and submit calibration reports. Supervision inspection acceptance shall be measured immediately after reading initial values. (8) each measuring point for each observation section within 14 days after planting, to submit their research laid the table control. (9) in the course of construction, all monitoring equipment should be protected, the supervisor requested protection area shall provide protective cover and logo. 10.5.2 surface deformation monitoring (1) surface deformation monitoring point Pier in-situ reinforced concrete Pier, the pier above the ground 1.2m, in undisturbed soil or bedrock (native) deep 1.0~1.5M. (2) the pier top of forced centering plate. (3) when planted, forced centering plate should be horizontal, angle not greater than 4 '. 10.5.3 level monitoring point (1) in the standard location monitoring points around the reserve pit formwork, aspect to facilitate in the leveling of the pit shall prevail. (2) the standard markers together with the accessories insert the bottom has not been final set in advance concrete, exposed bottom concrete 6、原厂预留功能，使用界面和功能和奥迪原车带蓝牙车型一样，具体画面、使用方法完全 和您的爱车说明书(蓝牙说明书和原车导航的说明书是一起的)关于蓝牙章节的一模一样 Yamaxunwudan 3-18 should be conducted in the presence of the supervisor. (7) monitoring instruments and equipment should be checked and corrected after installation, Embedment, and submit calibration reports. Supervision inspection acceptance shall be measured immediately after reading initial values. (8) each measuring point for each observation section within 14 days after planting, to submit their research laid the table control. (9) in the course of construction, all monitoring equipment should be protected, the supervisor requested protection area shall provide protective cover and logo. 10.5.2 surface deformation monitoring (1) surface deformation monitoring point Pier in-situ reinforced concrete Pier, the pier above the ground 1.2m, in undisturbed soil or bedrock (native) deep 1.0~1.5M. (2) the pier top of forced centering plate. (3) when planted, forced centering plate should be horizontal, angle not greater than 4 '. 10.5.3 level monitoring point (1) in the standard location monitoring points around the reserve pit formwork, aspect to facilitate in the leveling of the pit shall prevail. (2) the standard markers together with the accessories insert the bottom has not been final set in advance concrete, exposed bottom concrete