论如何分辨真假外贸原单尾货服装

论如何分辨真假外贸原单尾货服装 ——论如何分辨真假品牌外贸服装 为什么外贸服装会如此火爆，大家都争着去买呢,其实靠的就是四个字“价廉物美”～～～ 正所谓价格决定一切，外贸服装首先靠着它的廉价征服了大家的心，为什么外贸服装如此“价廉”呢，实际上，一件在专卖店卖的品牌服装，它的成本是十分高昂的，它需要承担品牌推广、店租、管理支出等等等等许许多多的成本，从而导致它必须卖到衣服本身成本的十几倍才可能实现盈利，这就是为什么专卖店中的衣服会那么贵的原因。而外贸服装的成本对比起来那就是十分低廉了，首先制衣工厂已经在订单中赚取了足够的利润，而且面料版型都是国外品牌公司提供，他出的只是人工，在这种情况下，多出来的尾货实际上相当于无本生意，同时这些尾货很多都因为没有包装吊牌或者有一些小瑕疵，也不用什么品牌推广、店租之类的支出，甚至工厂放着还占用仓库浪费仓管费用，因此制衣工厂会以极其低廉的价格批发出去，而不论其品牌，从而最终以很低的价格到了我们手里，虽然价低，但面料做工绝不含糊，除了一些小瑕疵，其他都是与专卖店卖的原版品牌服装一模一样的，只是剔除掉了百分之九十的品牌成本，如此“价廉”怎么会不吸引人呢，正所谓谁穿谁知道啊。 当然光便宜也不行，东西差也没人要。而外贸服装为什么“物美”呢，我们说一件好的服装，最根本的两点就是版型和面料，外贸服装是国外服装品牌在国内下单定做的服装，一般能够跨国下订carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline ... C. welding elbow should be not less than 1.5 times the pipe diameter. D. Press elbow should be not smaller than the outside diameter of the pipe. 单的品牌，都是比较有实力的，多为国外的比较热门品牌，或许他们在国内没什么名气，但在国外却是声名远扬，同时还有很多国际大牌子也在国内下单生产，如耐克、阿迪达斯、背靠背等等都有在国内下单生产。这些品牌公司的面料一般都是专供的，质量十分棒，而且版型也有其独到之处，这也是品牌之所以为品牌的核心价值所在，面料和版型都一级棒的服装，其质量自然也是一级棒的，而她与专卖店卖的品牌服装有什么区别呢,首先看相同之处:(1)品牌相同，都是同一个品牌公司出品，都是正品;(2)面料相同，都是品牌公司提供的面料，所以其面料是一模一样的;(3)版型相同，同上，版型也是品牌公司提供的，与专卖店款也是一样的。我们再来看有什么不同之处:(1)价格不同，其价格往往只是专卖店价格的二到三折，有时甚至低至一折以下;(2)做工有稍微不同，外贸服装的做工跟专卖店还是有细微区别的，比如有些线头或者扣子订歪了等小瑕疵，毕竟最好的都送专卖店了;(3)包装吊牌的区别，很多品牌外贸服装为了避免冲击到专卖店渠道，包装吊牌都被厂家去掉了;(4)辅料有的不一样，因为辅料数量有限，有的纽扣、拉链不是原装。以上就是外贸服装与专卖店服装的一些区别，可以说除了一些不影响穿着的不同外，其它都是与专卖店卖的一模一样的，而更重要的是价格极其之低廉。而且并不是所有品牌外贸服装都有瑕疵，如果是爆单货那所有东西都是与专卖店一模一样的，所以说爆单是外贸服装中的极品。 这就是外贸服装为什么价廉物美的由来，也是大家趋之若鹜的根本原因。 carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline ... C. welding elbow should be not less than 1.5 times the pipe diameter. D. Press elbow should be not smaller than the outside diameter of the pipe. 如此物美价廉的东西当然受到大家的喜欢，因此外贸服装市场也火爆起来了。但是随着外贸服装的兴起，假货仿品也纷纷打着外贸服装的牌子出来兴风作浪，导致了今天外贸服装市场里的鱼龙混杂，良莠不齐。小生我长期在外贸服装行业厮混，对于其中的种种内情和做法知之甚深，这就引出了第三个问题，如何分辨真假外贸服装, 如分辨真假外贸服装 早几年，外贸服装刚刚兴起时，真货还是比较多的，那时候可以说是外贸服装的黄金时代，真是遍地黄金啊，现在，随着外贸服装越来越火爆，无数的假货蜂拥而出，外贸服装进入了破铜烂铁时代，小生不忍看到那么多的朋友买到假货却以为是买到了真正的外贸原单沾沾自喜，而奸商们却在一旁窃笑，特在此奉献出自己从事外贸服装行业多年所取得的一些分辨真假外贸服装的经验，希望朋友们能从中学习到一些有用的东西，那就是小生莫大的满足了。小生会用一些图片来进行对比，从而让大家能够最直观地分辨出真假货的区别。下面讲课正式开始，请同学们注意: 1、品牌 有的看官要说了，你不是要讲如何分辨真假吗,怎么跑了个品牌出来了，这跟真假有什么关系，呵呵，且等小生慢慢道来。为什么要把品牌作为第一个关键列出来呢，因为在国外有很多二三线carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline ... C. welding elbow should be not less than 1.5 times the pipe diameter. D. Press elbow should be not smaller than the outside diameter of the pipe. 的牌子在其本国很有名，就好像我们的李宁、安踏、七匹狼，在国内卖得火爆，但在国外人家根本不知道是什么品牌。同理也是这样，很多在国外卖的很火爆的牌子，因为没有在国内做推广，大家根本不知道，但是其版型和面料都是很好的。像这些在国内不是很有名的牌子，那些假冒工厂根本不屑一顾，因为市场决定一切，这些牌子没人知道，造假划不来也卖不出去，还不如做多几件耐克和阿迪呢。而正所谓枪打出头鸟，那些在国内卖得火爆的牌子，如耐克、阿迪达斯、背靠背之类的，据小生统计，目前95%以上的仿单都是那些在国内卖得火爆的牌子，而像那些在国内不知名的外国品牌，仿冒的就很少，这也就决定了我们可以从一些国内不出名的品牌中挑到好货，如CANTERBURY这个新西兰的服装品牌，它的标志是三个新西兰国鸟叽维鸟组合成的LOGO，属于橄榄球世界的顶级品牌，在南半球和英语国家，老外们趋之若骛,在亚洲的日本香港都人气非凡，在专卖店价钱卖的也很贵，一件都要六七百元，但由于在国内没什么知名度，因此也不会去做他的仿单，这样的货假的可能性就极小，而且它的做工和面料确实很棒，可以说是难得的好货。当然，也并不是说所有的大牌子都是假货，如果是练到小生这种境界，还是能大浪淘沙找出真金的。 2、面料 真正定夺一件外贸服装的品质，说到底还要看面料。面料是一件衣服的根本，是衣服最重要的组成部分，面料的好坏决定了一carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline ... C. welding elbow should be not less than 1.5 times the pipe diameter. D. Press elbow should be not smaller than the outside diameter of the pipe. 件衣服质量的好坏，决定了一个品牌的档次，很多高档的品牌都是有自己专有的面料的，甚至申请了专利，独一无二，就此一家，是没有人能够仿冒出来的，如ADIDAS阿迪达斯的ClimaLite是一种贴近皮肤面的轻巧、透气面料，能够将热量和汗水带离身体，让您即便在最热的条件下也能保持凉爽和干燥。还提供UV防晒功能，过滤掉阳光中的有害成分。又如NIKE耐克得FLYDRY面料，也是相同的道理，这样的面料科技含量高，仿品是做不出来的。而好的面料，就是要柔软舒适，却不失筋骨。比如，支数高的纯棉质地厚，多洗几次也不容易变形;好的大衣面料，隐约有一层光泽，揉搓几次不会起球;羽绒衣要触手柔软，摸不到羽毛梗，还有防钻绒的隔层正品面料总是很柔软坚韧，质地很细致，其实感觉是很难形容的，反正正品面料会让你产生一上手就很舒服的感觉，足以断定他是真的。有机会感觉一下就知道了。 3、品牌LOGO刺绣 品牌外贸服装LOGO的刺绣是最显功夫的，也是很多仿冒小厂粗糙的手工无法做到的，一般真品的品牌LOGO刺绣都相当精致、饱满，无杂乱感，如耐克的那一勾，看起来好像很简单，但是实际上这个LOGO的刺绣不是那么容易的，需要严格控制针数和比例，所以我们看到很多仿的货大多数刺绣出来的LOGO会让人感觉别扭，觉得那一勾勾得很不爽，而真正原单货的刺绣会非常的舒畅，有如行云流水一般，一气呵成。又好像KAPPA的LOGO,两个背靠carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline ... C. welding elbow should be not less than 1.5 times the pipe diameter. D. Press elbow should be not smaller than the outside diameter of the pipe. 背的男女，这是比较复杂的。里面有许多的细节，首先看女的胸部是否突出，还要看女的臀部比男的要大些，而且形状是不同的，还有女的高度比男的高度要低些，而且这个标整体是一种颜色绣上去的或印下去的，纹路清晰，整齐，精细。同时还要说明一下的就是，出口的KAPPA的LOGO跟国内专柜KAPPA的LOGO有一个区别在于，国外KAPPA LOGO上的小人脚趾是没有分叉的，而国内KAPPA LOGO上的小人脚趾是分叉的，很多人以这个区别来分辨KAPPA的真假，实际上是错误的，大家可以到KAPPA的国外官网去看看，脚趾头是没有分叉的，因此这个你认为是假货的象征实际上恰恰或许就是真品外贸服装的标志哦。实际上很多品牌国外的版本和国内的版本都是不一样的，在国内奉为金科玉律的分辨真假方法，对外贸服装就不适用了，还很容易弄出笑话来。好像ADIDAS阿迪达斯有一个分辨方法是说字母I一定要与三杠粘在一起，实际上小生看到很多出口的阿迪就没有这种规矩，而搞笑的是很多人就凭这一条就认定是假货，错失了淘到好东西的大好机会。实际上大家想想，如果真要作假，字母顶上去是很简单的事情，根本不需要任何技术，何必还要留一个那么大的破绽来给你抓呢,就好像KAPPA刺绣要刺个分叉一样没有任何难度。有时候反向思维一下，反而可以看出事情的真相。实际上好像阿迪、靠背这些在国内卖得如此之昂贵的牌子，在国外也只是二三流品牌，经常在超市之类的大卖场只卖几美元的，因此，做工比较粗糙，各方面要求也不像国内那么严格，但面料还是其本身的面料，这一点上与国内专柜还是一样的。总之carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline ... C. welding elbow should be not less than 1.5 times the pipe diameter. D. Press elbow should be not smaller than the outside diameter of the pipe. 仿的刺绣给人感觉就是一种别扭的感觉，看得多了大家都会有这种感觉。 4、辅料 什么是辅料，就是纽扣、拉链等配件，从这些细节方面来确认外贸服装的真假。好像纽扣，在上面刻上品牌标志，这种成本是比较大的，开一个模都要很多钱的，所以一般仿冒者是不会去花这些钱的，所以看一个品牌的纽扣可以分辨真假。例如这款卡尔卡尼的纽扣 纽扣上的logo是激光蚀刻，很有动感，开一个模都要很多钱的 卡尔卡尼是美国的街头品牌，时尚教父，在国内没有什么名气，造假者决不会费钱费力去开模做专用纽扣，所以根据纽扣这一个细节就可以确定这款服装是货真价实的外贸服装。还有拉链，像NIKE等大品牌基本用的都是YKK拉链，大家看看拉链的的做工，精细程度，也能看出一些情况来，但由于YKK的拉链价格高昂，国内专柜货绝对是100%YKK，但是大品牌因为恐惧“盗版”，会严格控制原材料进出。如前文所述，下单后，国外公司对于纽扣、拉链、吊牌等辅料的控制是比较严格的，因为一个萝卜一个坑，辅料的数量是可以计算出来的，多也不可能多到哪里去，不像面料是无法准确计算出用量。做完订单后，制衣厂通常面料有剩，扣子、拉链用光。这时，就有厂家“废物利用”，用多余的原装面料，再随便carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline ... C. welding elbow should be not less than 1.5 times the pipe diameter. D. Press elbow should be not smaller than the outside diameter of the pipe. 找些辅料根据原来的版型做一批衣服。这批衣服尽管细节粗糙，但面料都是原装的，也是外贸货中不可多得的“极品”。 5、小细节、小配件 很多真品外贸服装，往往可以从一些小细节、小配件来进行分辨。如彩条衫、大花面料的裙子，最考验外贸制衣厂的做工。手工精致的衣服，彩条走向、花样排布，事先都会有安排。衣服肩膀、袖口、腰身接口处，左右两边相同颜色的条子正好对牢，走向相同;花朵的每一片花瓣都嵌得“天衣无缝”，拼出一朵完整的花。这样的做法，不仅要事先设计周全，而且极浪费面料。有些高级成衣面料，1米之内都不会有重复的花样，拼出一朵花，要浪费多少料子就可想而知了。还有很多真品服装有着令你意想不到，假货也绝不会有的小配件。如本人曾经见过的一件KAPPA的卖场版，做工似乎挺粗糙，看起来像假货，但它的洗标那还有一条黑色的条，那是什么,原来是超市用的防盗条 我们国内超市一般都是钉个大钉子，只有国外超市才会在服装中装这么一根，仿品是决不会装这东西的，所以可以确定是真正的外贸服装。又如我看过的一条quicksilver冲浪沙滩裤，袋子里有一个塑料锯齿，这是什么呢,原来是所有专业沙滩裤都有的一个小玩意，是在遇到危险时应急用的。假货我看连这是什么都不知道，更不要说仿冒了。 6、标签 carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline ... C. welding elbow should be not less than 1.5 times the pipe diameter. D. Press elbow should be not smaller than the outside diameter of the pipe. 真品的标签有着很多的讲究，很多防伪也主要应用在标签上，如ADIDAS和NIKE的一样，大部分功能面料的衣服都是采用胶印的主标，仔细观察主标的平整度和清晰度即可。如果是指定地区的版本，只会在上面标出指定地区的尺寸。如果是多国版本，则会标八国尺寸。还有些水洗标上有出厂的序列号等等均可以作为分辨真假的依据。又如ADIDAS的国旗标，只要看八国国旗的印刷质量就能分辨出真假。正品色彩很鲜艳，假的或者颜色很暗淡、条纹模糊，或者没有八国国旗。还有些品牌是有防伪标的，直接看防伪标就可以确定真假，如锐步和FILA。 7、瑕疵 有人淘外贸衣服，喜欢一把捞起衣服，仔细检查衣服线脚;又或者把针织衫对着日光灯左照右照，寻觅抽丝和漏针的痕迹。一旦挑到“毛病”，就说老板用“次货”糊弄她们。其实不然。有些漏洞百出的“次货”，偏偏可能是专卖店里那件衣衫的“孪生兄弟”。一般来说，在国内加工的衣服做好之后，先要被老外验货。检验员挑出有问题的衣服，在瑕疵旁贴一个小红箭头，遣送回厂。这样的外贸退货，虽然有时有色差、漏针和抽丝，但用的却是最优质的面料、配料，做工顶级，一穿上身，就能体会到“货真价实”4个字。而实际上，我们的外贸服装，主要的都是这些尾货，这些或多或少不影响穿着的小瑕疵才是真品的标志，那些任何瑕疵都没有的货大家才要多加小心了。 carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline ... C. welding elbow should be not less than 1.5 times the pipe diameter. D. Press elbow should be not smaller than the outside diameter of the pipe. 8、尺码 看衣服尺码也是分辨真假外贸服装的一个方法，欧美人士的体形跟亚洲人不同，因此他们衣服的尺码也跟我们的尺码不一样，这就有了亚洲码和欧洲码之分，欧美人士的体形决定了我们亚洲人如果不是特别肥胖特别高大，是不适合穿他们的码的，假冒工厂也决不会仿使用欧码的衣服，因为根本不适合在国内出售。而出口欧美的衣服当然是用的欧码，如果一件衣服出口欧美却标的亚洲码，那肯定是假货，只有出口日韩的衣服尺码才与我们相当，所以日韩单因为其作工和尺码被认为是黄金外贸服装。 9、剪标 有些外贸服装品牌公司为了保护自己专卖店产品，在出厂前会要求剪去领标、洗标才出售，剪标服饰一般都是品牌服饰的过季产品拿来处理而产生的，其服饰的面料、手工、质地和真正的品牌服饰没有任何区别，只是因为款式是上了季度或再上个季度的，而拿出来清仓处理的。但目前小生发现存在这样一种情况，有些服装店老板，在衣服标牌上不痛不痒打个小洞、剪个小角的，就说是“剪标货”，其实这都是哄外行人的“噱头”。实际上一般厂家为了保证当季产品的销售价格不受到影响，都会把商标完全去除后才拿出来处理，所以真正被迫销毁的“剪标货”，一剪刀下去决不会留情。要carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline ... C. welding elbow should be not less than 1.5 times the pipe diameter. D. Press elbow should be not smaller than the outside diameter of the pipe. 么是剪个月牙形，把商标上的字全抠掉;要么就是把商标“连根拔”，只剩下两道商标缝线依稀可见。反正不能让你认出来。反正不能让你认出来。如下面两件nike就是真正的剪标货。当然并不是所有外贸服装都要剪标，很多品牌国内与国外分属不同的公司，国外公司并不需要考虑你国内的销售，自然不会去剪标。 四、如何买到货真价实的外贸服装 上述只是分辨真假外贸服装的一些方法，希望能够帮助不知如何分辨真假的朋友们能正确识别真正的正品外贸时装，买到物美价廉的好货。但正所谓道高一尺，魔高一丈，也有很多跟单的东西不是很容易分辨出来的，而现在的淘宝上，所谓的外贸服装泛滥成灾，但真正的正品外贸服装却寥寥无几，淘到一件真正的品牌外贸服装，绝对是一件其乐无穷的事。 carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline ... C. welding elbow should be not less than 1.5 times the pipe diameter. D. Press elbow should be not smaller than the outside diameter of the pipe.