执业助理医师没考试没过--补救方案

执业助理医师没考试没过--补救 第 1 题 执业医师没考过补救方案 www.erjyw.com 可提供改分通过服务 男，30岁。近2周前牙咀嚼疼痛，且牙龈肿胀有脓液流出，2年前该牙曾因龋坏而疼痛，未曾治疗。检查:残冠，近中邻面探及深龋洞，牙变色，叩诊有不适感。唇侧牙龈见一瘘管，有脓液溢出，X线片显示根尖有阴影 该牙经完善的根管治疗，瘘管一般会愈合，如长期不愈合，可采用根尖刮治或根尖切除术，可做桩冠的时间是( ) A.3天 B.1周 C.2周 D.半年 E.3个月 正确:C, 第 2 题 患者女性。21岁。4天前劳累后出现右下后牙龈胀痛，进食、吞咽时加重。昨日出现局部跳痛，开口受限，伴发热。检查见右面下部稍肿胀，张口二指，右下第三磨牙近中阻生，冠周龈红肿、触痛明显，挤压时有少许脓液从远中盲袋内溢出。沟变浅，黏膜充血。压痛明显，有轻度波动感。未见龋坏。叩诊(-)，牙石(++)。咽侧壁稍红。 如果患者出现明显张口受限及以下颌角为中心的红肿、压痛，应怀疑存在( ) A.颊间隙感染 B.颞下间隙感染 C.下颌下间隙感染 D.咬肌间隙感染 good processing performance, with sufficient rigidity. Template selected template surface should be flat and smooth, plywood coated high strength, good wear resistance, water resistance, durability, physical and chemical properties of stable and smooth surface, no pollution, no damage, clean. Template straight keel, specifications, and panels close, firmly attached, have sufficient rigidity. Templates may not play the ink, paint and write numbers to avoid contamination of concrete surfaces. Template design set of bolt holes through walls, but not free to play holes, openings, portrayal, nailing. Release agent used on concrete surface quality and color does not affect the release agent. Pull bolt specifications and varieties should be according to the concrete lateral pressure, wall waterproofing, air defence requirements and template Panel selection, bolts used should have sufficient strength to pull the bolt casing and plug should be determined according to the diameter of the bolt, the choice of plastics, rubber, nylon and other materials. Topstitching cross-section according to the circumstances, the request can tear down, should adopt the trapezoid, square, rounded square; can be made for hardwood, nylon, plastic, aluminum, stainless steel and other materials. Depth is not greater than 20mm. Steel frame in front of the Assembly must be straightened, wood joist requires that you have sufficient rigidity. Keel as far as possible without joints, if it proves necessary to connect, the connection must be staggered. Template processing must be carried out in wood processing plant, processing materials when cutting line cutting, precise size, angle, surface smooth, tight joints. Field spell using a template before the template, on the surface smoothness, the section size, Yin and Yang template angle, adjacent to surface level and check the bolt Assembly. Before clamping, to check the template, especially the template Panel connection E.咽旁间隙感染 正确答案:D, 第 3 题 女性，41岁。身高l64cm、体重65kg，近半年多饮、多尿伴乏力。血压20/.3kPa，余未见明显异常。空腹血糖6.9mmol/L。 进一步检查，空腹血糖7.1mmol/L，餐后2h血糖11.1mmol/L。哪项为最佳治疗方案( ) A.控制饮食，增加运动，监测血糖 B.控制饮食，增加运动，口服格列齐特(达美康) C.控制饮食，增加运动，口服D860 D.控制饮食，增加运动，口服消渴丸 E.控制饮食，增加运动，胰岛素治疗 正确答案:A, 第 4 题 20岁男性，发热起病，体温38?.3天后体温下降伴周身乏力，食欲不振，恶心呕吐，近2天发现尿色深如豆油样，胆红素定量80umol/L， 抗HBs(+)，抗HAVlgM(+),巩膜及皮肤中度黄疸，肝区轻度叩痛，肝肋下触及1.0cm质软，脾侧卧未及，胆囊区无压痛。 从病原学诊断应考虑为( ) A.急性乙型肝炎 B.急性甲型肝炎 C.急性戊型肝炎 D.急性甲、乙型肝炎 E.急性丁型肝炎 正确答案:B, 第 5 题 good processing performance, with sufficient rigidity. Template selected template surface should be flat and smooth, plywood coated high strength, good wear resistance, water resistance, durability, physical and chemical properties of stable and smooth surface, no pollution, no damage, clean. Template straight keel, specifications, and panels close, firmly attached, have sufficient rigidity. Templates may not play the ink, paint and write numbers to avoid contamination of concrete surfaces. Template design set of bolt holes through walls, but not free to play holes, openings, portrayal, nailing. Release agent used on concrete surface quality and color does not affect the release agent. Pull bolt specifications and varieties should be according to the concrete lateral pressure, wall waterproofing, air defence requirements and template Panel selection, bolts used should have sufficient strength to pull the bolt casing and plug should be determined according to the diameter of the bolt, the choice of plastics, rubber, nylon and other materials. Topstitching cross-section according to the circumstances, the request can tear down, should adopt the trapezoid, square, rounded square; can be made for hardwood, nylon, plastic, aluminum, stainless steel and other materials. Depth is not greater than 20mm. Steel frame in front of the Assembly must be straightened, wood joist requires that you have sufficient rigidity. Keel as far as possible without joints, if it proves necessary to connect, the connection must be staggered. Template processing must be carried out in wood processing plant, processing materials when cutting line cutting, precise size, angle, surface smooth, tight joints. Field spell using a template before the template, on the surface smoothness, the section size, Yin and Yang template angle, adjacent to surface level and check the bolt Assembly. Before clamping, to check the template, especially the template Panel connection 某小学有大批的学生发生不明原因的腹泻。为了寻找病因及流行的线索。 通过第一步的研究，结果提示大批学生的腹泻可能与饮用了某厂生产的饮料有关，下一步最好采取( ) A.病例对照研究 B.临床试验研究 C.现况调查研究 D.理论流行病学研究 E.队列研究 正确答案:A, 第 6 题 女性，52岁，有胆管结石病史，近2年来右上腹痛，体温37.8。C，2h前突然畏寒、寒战，体温达40?，精神紧张兴奋、口渴、面色苍白，脉搏98次/分、有力，血压.7/.8kPa(110/96mmHg)，尿量每小时26ml。 为排除发生弥散性血管内凝血的可能做了多项检查，下列哪项监测检查结果 ) 是无意义的( A.血小板计数低于 B.纤维蛋白原少于1.5g/L C.凝血酶原时间较正常延长3s以上 D.副凝固试验阳性 E.凝血时间明显缩短 正确答案:E, 第 7 题 女性，42岁，急性肠梗阻1天。大量呕吐、乏力、不口渴，舌干燥，皮肤干燥、松弛.脉细，脉搏118次分。血压8.0/5.3kPa(60/40mmHg)，血清钠0mmo1/L，动脉血PH值7.32。 该患者可能发生( ) good processing performance, with sufficient rigidity. Template selected template surface should be flat and smooth, plywood coated high strength, good wear resistance, water resistance, durability, physical and chemical properties of stable and smooth surface, no pollution, no damage, clean. Template straight keel, specifications, and panels close, firmly attached, have sufficient rigidity. Templates may not play the ink, paint and write numbers to avoid contamination of concrete surfaces. Template design set of bolt holes through walls, but not free to play holes, openings, portrayal, nailing. Release agent used on concrete surface quality and color does not affect the release agent. Pull bolt specifications and varieties should be according to the concrete lateral pressure, wall waterproofing, air defence requirements and template Panel selection, bolts used should have sufficient strength to pull the bolt casing and plug should be determined according to the diameter of the bolt, the choice of plastics, rubber, nylon and other materials. Topstitching cross-section according to the circumstances, the request can tear down, should adopt the trapezoid, square, rounded square; can be made for hardwood, nylon, plastic, aluminum, stainless steel and other materials. Depth is not greater than 20mm. Steel frame in front of the Assembly must be straightened, wood joist requires that you have sufficient rigidity. Keel as far as possible without joints, if it proves necessary to connect, the connection must be staggered. Template processing must be carried out in wood processing plant, processing materials when cutting line cutting, precise size, angle, surface smooth, tight joints. Field spell using a template before the template, on the surface smoothness, the section size, Yin and Yang template angle, adjacent to surface level and check the bolt Assembly. Before clamping, to check the template, especially the template Panel connection A.等渗性脱水 B.中度低渗性脱水 C.中度高渗性脱水 D.重度高渗性脱水 E.呼吸性酸中毒 正确答案:A, 第 8 题 患者女性。21岁。4天前劳累后出现右下后牙龈胀痛，进食、吞咽时加重。昨日出现局部跳痛，开口受限，伴发热。检查见右面下部稍肿胀，张口二指，右下第三磨牙近中阻生，冠周龈红肿、触痛明显，挤压时有少许脓液从远中盲袋内溢出。沟变浅，黏膜充血。压痛明显，有轻度波动感。未见龋坏。叩诊(-)， 龈颊沟肿胀的处理为( ) 牙石(++)。咽侧壁稍红。 A.口服抗生素，局部不作处理 B.切开引流 C.拔除 D.开髓、拔髓、根管引流 E.牙周治疗 正确答案:B, 第 9 题 女性，48岁。胃病史10余年，近1年症状加剧。胃纳不佳。胃镜检查见胃角溃疡，幽门螺杆菌检查阳性。 最佳治疗方案是( ) A.阿莫西林(羟氨苄青霉素)加甲硝唑 good processing performance, with sufficient rigidity. Template selected template surface should be flat and smooth, plywood coated high strength, good wear resistance, water resistance, durability, physical and chemical properties of stable and smooth surface, no pollution, no damage, clean. Template straight keel, specifications, and panels close, firmly attached, have sufficient rigidity. Templates may not play the ink, paint and write numbers to avoid contamination of concrete surfaces. Template design set of bolt holes through walls, but not free to play holes, openings, portrayal, nailing. Release agent used on concrete surface quality and color does not affect the release agent. Pull bolt specifications and varieties should be according to the concrete lateral pressure, wall waterproofing, air defence requirements and template Panel selection, bolts used should have sufficient strength to pull the bolt casing and plug should be determined according to the diameter of the bolt, the choice of plastics, rubber, nylon and other materials. Topstitching cross-section according to the circumstances, the request can tear down, should adopt the trapezoid, square, rounded square; can be made for hardwood, nylon, plastic, aluminum, stainless steel and other materials. Depth is not greater than 20mm. Steel frame in front of the Assembly must be straightened, wood joist requires that you have sufficient rigidity. Keel as far as possible without joints, if it proves necessary to connect, the connection must be staggered. Template processing must be carried out in wood processing plant, processing materials when cutting line cutting, precise size, angle, surface smooth, tight joints. Field spell using a template before the template, on the surface smoothness, the section size, Yin and Yang template angle, adjacent to surface level and check the bolt Assembly. Before clamping, to check the template, especially the template Panel connection B.多潘立酮(吗丁啉)加阿莫西林(羟氨苄青霉素) C.手术切除 D.铋剂加阿莫西林(羟氨苄青霉素)加甲硝唑 E.生胃酮 正确答案:D, 第 10 题 患者男性，26岁，因交通事故造成面部外伤而来诊。检查见耳、鼻出血。并证实有脑脊液鼻漏，面部两侧不对称，右侧眶下区肿胀。右下眼睑肿胀、淤血。右侧下颌骨下垂。后牙早接触 如X线片显示右侧上颌骨骨折.骨折线自鼻额缝向两侧横过鼻梁、眶内侧壁、眶底。经颧上颌缝达翼突。正确的诊断是( ) A.Le Fort I型骨折 B.Le Fort ?型骨折 C.Le Fort ?型骨折 D.鼻骨骨折 E.颧弓骨折 正确答案:B, good processing performance, with sufficient rigidity. Template selected template surface should be flat and smooth, plywood coated high strength, good wear resistance, water resistance, durability, physical and chemical properties of stable and smooth surface, no pollution, no damage, clean. Template straight keel, specifications, and panels close, firmly attached, have sufficient rigidity. Templates may not play the ink, paint and write numbers to avoid contamination of concrete surfaces. Template design set of bolt holes through walls, but not free to play holes, openings, portrayal, nailing. Release agent used on concrete surface quality and color does not affect the release agent. Pull bolt specifications and varieties should be according to the concrete lateral pressure, wall waterproofing, air defence requirements and template Panel selection, bolts used should have sufficient strength to pull the bolt casing and plug should be determined according to the diameter of the bolt, the choice of plastics, rubber, nylon and other materials. Topstitching cross-section according to the circumstances, the request can tear down, should adopt the trapezoid, square, rounded square; can be made for hardwood, nylon, plastic, aluminum, stainless steel and other materials. Depth is not greater than 20mm. Steel frame in front of the Assembly must be straightened, wood joist requires that you have sufficient rigidity. Keel as far as possible without joints, if it proves necessary to connect, the connection must be staggered. Template processing must be carried out in wood processing plant, processing materials when cutting line cutting, precise size, angle, surface smooth, tight joints. Field spell using a template before the template, on the surface smoothness, the section size, Yin and Yang template angle, adjacent to surface level and check the bolt Assembly. Before clamping, to check the template, especially the template Panel connection